SpoofCard Caller ID Spoofing Calling Card
| "Trend Trend C158X1/4TC Tongue & Groove Set" |
| "A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. D 41 mm C 6.35 mm B 22 mm Shank Diameter 1/4 inch Overall length 75 mm Timber thickness min. 15 mm Timber thickness max. 18 mm"
Price: 43.99 |
| "Trend Trend C194X1/2TC Staggered Mortise Cutter" |
| "TCT cutter with staggered cutting surfaces. D 5/8 inch D 16 mm C 2 inches C 50 mm OL 101 mm Shank Diameter 1/2 inch"
Price: 33.98 |
| "Trend Trend CSB/12024T 120mm Saw Blade" |
| "Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard."
Price: 13.99 |
| "Trend Trend 7/06X1/4TC Flat Ovolo 12mm Radius" |
| "Panel mould and edge mould cutter. D 25 mm C 8 mm R 12 mm"
Price: 47.99 |
| "Trend Trend 46/91X1/4TC Profiler" |
| "Profiler with shank mounted bearing guides. D 1/2 inch D 12.7 mm C 3/8 inch C 9.5 mm B 12.7 mm A 90 degrees"
Price: 37.99 |
| "Trend Trend 866X1/2TC Finger Jointer" |
| "Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. D 40 mm B 28 mm E 6.0 mm OL 96 mm Shank Diameter 1/2 inch Timber thickness min. 11 mm Timber thickness max. 36 mm"
Price: 125.12 |
| "Trend Trend RT/23X1/2TC Rota-Tip Straight Cutter 19.1mm" |
| "A straight sided router cutter with replaceable blades for longer life. D 3/4 inch D 19.1 mm C 50 mm OL 107 mm Shank Diameter 1/2 inch"
Price: 95.99 |
| "Trend Trend C214X1/2TC Bearing Guided 3 Degrees Undercut 50mm Cut" |
| "3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. D 24.2 mm C 50 mm A 93 degrees Shank Diameter 1/2 inch"
Price: 71.65 |
| "Trend Trend C021AX1/4TC 12.55 x 25.4mm Two Flute Straight Cutter" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 1/2 inch D 12.55 mm C 1 inch C 25.4 mm OL 66 mm Shank Diameter 1/4 inch"
Price: 16.99 |
| "Trend Trend C210Ax1/4tc Weatherseal Groover" |
| "Two fluted tungsten carbide weatherseal groover for use on natural timbers and man made boards. D 34 mm C 2 mm OL 54.5 mm B 20 mm Shank Diameter 1/4 inch"
Price: 43.99 |
| "Trend Trend C127X1/4TC Rounding Over 6.3mm Radius X 15.9mm Cut" |
| "For producing ovolo and rounding over edge moulds, using a side fence or back fence. D 5/8 inch D 15.9 mm C 13.5 mm R 6.3 mm Overall length 57 mm Shank Diameter 1/4 inch"
Price: 20.99 |
| "Trend Trend C179X1/2TC Dovetail Cutter 19.1mm x 97° x 25mm cut" |
| "These cutters are for Trend Craft Dovetail Jigs. D 19.1 mm C 25 mm OL 65 mm A 97 degrees Shank Diameter 1/2 inch"
Price: 26.99 |
| "Trend Trend SET/MT1X1/4TC Imperial Mortise & Tenon Cutter Set" |
| "A set of five long reach straight cutters with diameters of 1/4 inch to 5/8 inch suitable for use with the Trend MT/JIG Mortise and Tenon Jig. This set includes: 1 x C008X1/4TC - Straight 6.35mm dia x 25.4mm cut 1 x C012X1/4TC - Straight 7.9mm dia x 25.4mm cut 1 x C015X1/4TC - Straight 9.5mm dia x 31.8mm cut 1 x CO22X1/4TC - Straight 12.7mm dia x 31.8mm cut 1 x C026X1/4TC - Straight 15.9mm dia x 25.4mm cut"
Price: 71.99 |
| "Trend Trend UNI/PIN/1 Unibase Line Up Pin" |
| "Replacement line-up pin for the UNIBASE."
Price: 2.99 |
| "Trend Trend C197X1/2TC 45° Bearing Guided Chamfer" |
| "Self-guiding chamfer/bevel cutter. D 51 mm C 19 mm B 12.7 mm A 45 degrees Overall length 72.5 mm Shank Diameter 1/2 inch For stationary machines - Max 18,000rpm"
Price: 46.99 |
| "Trend Trend FIX/KIT/3 Unibase Fixing Kit" |
| "For fitting routers to self-made router tables & accessories."
Price: 3.98 |
| "Trend Trend 61/12X1/4TC Dowel Drill 1/4""" |
| "Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Refs 61/01, 61/06 and 61/08 are suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. D 1/4 inch D 6.35 mm C 27 mm OL 57 mm"
Price: 18.53 |
| "Trend Trend C120AX1/2TC Slat Wall Cutter" |
| "A 'T' slot cutters for clamping and hanging applications. D 30 mm D2 10.5 mm C 7 mm R 3 mm A 119 degrees Overall length 55.5 mm Shank Diameter 1/2 inch"
Price: 57.98 |
| "Trend Trend RB/A Rota-Tip Blade 29.5 x 9 x 1.5mm pack of 1" |
| "Replacement Solid Carbide blades. Length 29.5 mm Width 9.0 mm Thickness 1.5 mm Holes 2 Hole diameter 4 mm Hole centres 14 mm End clearance yes"
Price: 8.99 |
| "Trend Trend 5/53X1/2TC Mortise Cutter 1/2"" Shank" |
| "TCT cutter with staggered cutting surfaces. D 16 mm C 50 mm OL 103.0 mm"
Price: 62.99 |
| "Trend Trend 46/44X1/4TC 24mm Rebater" |
| "Popular rebate sets which include different size bearings for a choice of rebates. D 24 mm C 12.7 mm B 16 mm B2 19 mm B3 22 mm Shank Diameter 1/4 inch"
Price: 67.99 |
| "Trend Trend 46/283X1/2TC Guided Cove 1/2"" Shank" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D 63.5 mm C 1 inch C 25.4 mm B 12.7 mm B2 16 mm R 1 inch R 25.4 mm"
Price: 99.98 |
| "Trend Trend GB30/A 30mm Guide Bush" |
| "30mm steel guide bush. Outside diameter 30 mm Inner diameter 27 mm Projects from plate 10 mm Plate diameter 60 mm Csk screw hole centres 50 mm For use with line up pin ref. WP-T9/090"
Price: 10.99 |
| "Trend Trend 7E/5X1/4TC Pin Guided Round Over Cutter" |
| "Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. D 34.4 mm C 19 mm P 9 mm R 1/2 inch R 12.7 mm Shank Diameter 1/4 inch"
Price: 59.99 |
| "Trend Trend C176X1/4TC 8mm Dowel Drill" |
| "Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. D 8 mm C 35 mm OL 70 mm Shank length 23 mm Shank Diameter 1/4 inch"
Price: 19.99 |
| "Trend Trend C210X1/2TC Weatherseal Groover" |
| "Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. D 36 mm C 2 mm OL 80 mm B 22 mm Shank Diameter 1/2 inch"
Price: 43.99 |
| "Trend Trend C058X1/2TC Radius Cutter" |
| "These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. D 1 inch D 25.4 mm C 5/8 inch C 15.9 mm R 12.7 mm Overall length 54.5 mm Shank Diameter 1/2 inch"
Price: 31.99 |
| "Trend Trend SL/CC 2.5mm Slotter Blade" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. D 40 mm Kerf 2.5 mm No. of Teeth 2"
Price: 28.99 |
| "Trend Trend C034AX1/4TC Single Flute Cutter" |
| "Single fluted Tungsten Carbide straight cutter for fast free cutting. D 5/64 inch D 2.0 mm C 13/64 inch C 5.0 mm Overall length 52 mm Shank Diameter 1/4 inch"
Price: 14.05 |
| "Trend Trend SL/E 2.0mm Slotter Blade" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. D 40 mm Kerf 2.0 mm No. of Teeth 2"
Price: 28.99 |
| "Trend Trend C160AX1/4TC Dovetail Cutter" |
| "A dovetail cutter for the Titan Dovetail jig with the 12 mm comb D 5/8 inch D 15.9 mm C 14 mm Overall length 54 mm A 104 degrees Shank Diameter 1/4 inch"
Price: 16.99 |
