SpoofCard Caller ID Spoofing Calling Card
| "Trend Trend BW34 Bushing Washer" |
| "Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only."
Price: 2.48 |
| "Trend Trend BW25 Bushing Washer" |
| "Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only."
Price: 2.48 |
| "Trend Trend FHA/009 Fine Height Adjuster" |
| "This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height."
Price: 16.99 |
| "Trend Trend FHA/001 Fine Height Adjuster" |
| "This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height."
Price: 19.99 |
| "Trend Trend HJ/1 Hinge Jig 3mm Stop Kit" |
| "A 3mm spacer pack for use with the Hinge jig to allow it to be used on architrave that is set back by 4mm. Easy to retro fit to existing hinge jigs and allows for new style architectural designs. Supplied with fixing screws."
Price: 13.99 |
| "Trend Trend PUSHSTICK/1 Pushstick" |
| "Rigid plastic safety pushstick for guiding small sections of timber over a router or table saw."
Price: 7.19 |
| "Trend Trend CR/KB/PK3 Craft Pro Lobe Knob Pack" |
| "Made from reinforced plastic and have a steel stud."
Price: 12.98 |
| "Trend Trend CJ/BUSH Worktop Jig Bush" |
| "Replacement location bush for the COMBI66, COMBI651 & COMBI1002 jigs."
Price: 11.99 |
| "Trend Trend CRT/2 Profiling Top Guard" |
| "This is an important safety attachment when profiling with bearing guided cutters."
Price: 16.99 |
| "Trend Trend BW27 Bushing Washer" |
| "Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only."
Price: 2.48 |
| "Trend Trend C021X1/2TC Two Flute Straight Cutter" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 1/2 inch D 12.7 mm C 1 inch C 25.4 mm OL 68 mm Shank Diameter 1/2 inch"
Price: 16.99 |
| "Trend Trend B14 Bearing 14mm diameter 1/4"" Bore" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 11.99 |
| "Trend Trend RT/3.5 Torx Screw for Rota Tip Cutter" |
| "Replacement screw for the rota-tip cutters."
Price: 3.19 |
| "Trend Trend C175X1/4TC Dowel Drill" |
| "Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template."
Price: 19.99 |
| "Trend Trend CCC/KIT Cutter Collet Care Kit" |
| "This kit contains all the essential accessories to maximise the life of your router cutters, collets and router. A collet and cutter care kit to increase the life of the cutters and the crouter collet. The kit includes a mini-diamond sharpening stone, a 60ml can of Trendicote, a 60ml can of Rust Buster, four brass brushes and a cutter care booklet. The Rust Buster can be used to protect cutting tools against rust, frees sticky mechanisms, un-jams and lubricates. The Trendicote dry lubricant is sprayed on the routers cutters to reduce resin and dirt build up. It can also be used on jigs and machine tables to reduce friction. The Diamond stone is ideal for honing router cutters when used with water. A small water bottle is supplied in the kit for this purpose. The four brass brushes have sizes of 1/4"", 8mm, 3/8"" and 1/2"" and are used to clean the inside of the relevant size collet. The brush is used to remove dirt and resin build up in the slots and bore of the collet. Lastly the booklet gives full details on the care, storage and honing of router cutters."
Price: 28.99 |
| "Trend Trend GB/01 Guide Bush Screws" |
| "Pack of 10 guide bush screws."
Price: 3.98 |
| "Trend Trend CSB/BW15B Bushing Washer" |
| "Bushing washers supplied to reduce bore diameter for certain makes and models of saw."
Price: 1.99 |
| "Trend Trend C180X1/4TC 3mm x 14mm Dowel Drill" |
| "Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. D 3 mm C 14 mm OL 57 mm Shank Diameter 1/4 inch"
Price: 28.99 |
| "Trend Trend RESIN/600 Resin Cleaner 600ml" |
| "Spray-on resin remover & cutter cleaning liquid. Simply spray on wipe off."
Price: 25.99 |
| "Trend Trend CLT/NUT/T4 Collet Nut for T4" |
| "Replacement collet nut."
Price: 6.98 |
| "Trend Trend CLT/SLV/612 Collet Reduction Sleeve" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks."
Price: 12.98 |
| "Trend Trend C007X1/4TC 6.3 x 19.1mm Two Flute Straight Cutter" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 1/4 inch D 6.3 mm C 3/4 inch C 19.1 mm Overall length 62.5 mm Shank Diameter 1/4 inch"
Price: 11.99 |
| "Trend Trend PJ/1 Pivot Jig Spacer Set" |
| "Packet of 8 replacement spacers for the Trend Pivot Frame Jig."
Price: 3.19 |
| "Trend Trend ELLIPSEJ/1 Ellipse Jig Extension Bar 500mm x 12.7mm" |
| "A pair of extension rods for the Trend Eclipse jig, 500mm long for extra large ellipses & circles."
Price: 34.99 |
| "Trend Trend KB9/F/8 Lobe Knob" |
| "Reinforced plastic with brass insert. Suitable when a strong clamping action is required."
Price: 7.19 |
| "Trend Trend ROD/8x500 Guide Rods, 8mm x 500mm (Pair)" |
| "Extra long fence rods for mounting Trend T4 & T5 routers."
Price: 23.99 |
| "Trend Trend PRESSURE/1 Finger Pressure" |
| "Vertical or horizontal pressure guard."
Price: 10.99 |
| "Trend Trend AQ21/W/10 10m White Aquamac Strip" |
| "Strip is fitted into the door frame rebate (head and jambs) as three cut pieces forming a compression or wiping seal. Colour White Length 10m Seal size excl barb 11.5mmx9.8mm"
Price: 31.99 |
| "Trend Trend GB13/P/A Guide Bush, Plastic 13mm x 5mm Spigot" |
| "Guide bush guides the router when using a template."
Price: 5.99 |
| "Trend Trend CLT/T4/8 8mm Collet" |
| "One piece collet for the T4EK."
Price: 7.99 |
| "Trend Trend CLT/SLV/63127 Collet Reduction Sleeve" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks."
Price: 12.98 |
