SpoofCard Caller ID Spoofing Calling Card
| "Trend Specialist Groover 36mm 6mm 1/4""" |
| "Allows decorative cuts in panels and frames to disguise glue lines. D: 36 mm A: 45 degrees Bore: 1/4 inch C: 6 mm Dia Metric: 36 Angle: 45 Sawbore: 1/4 Saw Kerf Metric: 6 Saw Teeth: 2..."
Price: 31.95 |
| "Trend Professional Solid Carbide Planer Blade 82mm" |
| "Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. They are precision ground with two cutting edges and reversible for extended life. Never use dull blades. Unplug machine when fitting blades or unde..."
Price: 11.95 |
| "Trend Snappy 8 Piece Hex Shank Masonry Drill Set" |
| "Tungsten Carbide Tipped masonry drill bit set in tool holder. Unique tool holder includes removable inner section with hook and loop elasticated cartridges to accept an extra 8 hex power drive shanks and 8 insert bits. Sizes 3mm, 4mm, 5mm, 5.5mm, 6mm..."
Price: 24.95 |
| "Trend HR/JIG Worktop Hot Rod Jig" |
| "Routing jig for routing grooves in solid work tops to accept 12mm diameter hot rods. Hot rods prevent heat damage to work surface Accepts hot rods of size 100mm, 200mm, 300mm and 400mm. Made from 12mm hardwearing CNC machined Compact Grade High Press..."
Price: 78.95 |
| "Trend Combi 640H Insert Worktop Jig" |
| "Hire version worktop jig for 420mm to 640mm width worktops. Made from a hard wearing solid laminate 16mm thick with replaceable 12mm insert. Cuts up to 40mm thick work tops with or without anti drip post formed edge. Out-of-square joints can be accom..."
Price: 280.95 |
| "Trend Complete Flat Lying Trammel Set" |
| "The only flat lying compass in the world. Self supporting, giving more stability and control, reducing margin for error. Solves the problem found with traditional compasses and trammels which have high centre of gravity, and are therefore unstable an..."
Price: 30.95 |
| "Trend Professional Wood Cutting Saw Blade 160mm 24T 16mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 42.95 |
| "Trend CRAFTPRO Non Stick Wood Cutting Saw Blade 190mm 40T 30mm" |
| "Non-stick PTFE coat to prevent resin build up and increase sawblade life. Sawblades designed for a professional finish in soft wood, hard wood, particle board, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 25.4mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Etched with metric scale on body to aid depth setting. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. ..."
Price: 15.95 |
| "Trend Professional Wood Cutting Saw Blade 350mm 108T 30mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 144.95 |
| "Trend Snappy TCT Glass Drill Bit 3mm" |
| "TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. D: 3 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hexmm Dia Metric: 3..."
Price: 7.95 |
| "Trend Snappy Forstner Drill Bit 22mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 17.95 |
| "Trend Professional Aluminium and Plastic Cutting Saw Blade 216mm 64T 30mm" |
| "For non-ferrous metals or plastics. These blades have a negative hook angle. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Mi..."
Price: 99.95 |
| "Trend Professional Wood Cutting Saw Blade 184mm 24T 16mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 48.95 |
| "Trend Snappy Forstner Drill Bit 16mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 16.95 |
| "Trend Professional Panel Trimming Saw Blade 250mm 80T 30mm" |
| "For fine super trimming of panels. These blades have a triple chip tooth design with a triple chip tooth design with a positive hook for super fine finish. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered an..."
Price: 103.95 |
| "Trend Professional Wood Cutting Saw Blade 250mm 80T 30mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 105.95 |
| "Trend Snappy Forstner Drill Bit 35mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 23.95 |
| "Trend Snappy Short Pozi Screwdriver Bit PZ2 17mm Pack of 3" |
| "Mini 17mm size No.2 Pozi bits for No.6, 8 & 10 screws. Three pack. Use with Trend Compact Angle Driver ref. SNAP/ASA/3. OL: 17 mm Size: No.2 Pozi Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 17 Type or Grade: ..."
Price: 4.49 |
| "Trend CRAFTPRO Nail Cutting Saw Blade 235mm 40T 30mm" |
| "Teeth have top and front bevel which allows the blade to cut more easily through the timber. Sawblades designed for a professional finish in soft wood & hard wood. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded secu..."
Price: 17.95 |
| "Trend Snappy Torx Screw Driver Bits T10 25mm Pack of 3" |
| "A pack of 25mm Torx insert bits High grade chrome-vanadium steel, through hardened to hardness HRC 59-61 and precision machined to exacting standards of accuracy. Suit all types of screw applications in trade and industry. Use on manual and machine a..."
Price: 5.49 |
| "Makita 14 Piece Hex Shank HSS TiN Drill Bit Set" |
| "1/4"" Hex shank HSS drill bits with a titanium nitride coating for longer lifetime and reduced friction. Supplied in storage pouch.Contents• 2mm • 2.5mm • 3mm • 3.5mm • 4mm • 4.5mm • 5mm &bu..."
Price: 35.95 |
| "Trend CRAFTPRO Aluminium and Plastic Cutting Saw Blade 216mm 64T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain tr..."
Price: 26.95 |
| "Trend Draining Board Groove Jig" |
| "For routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate. Provides a 0.5 degree fall. Grooves at 50mm pitch and 455mm long. Sight marks for lining up. Three remo..."
Price: 141.95 |
| "Trend Template Inlay Pig" |
| "Clear 6mm plastic inlay templates for use with inlay kit fitted to a plunge router. Inlay kit allows a shaped pocket and matching inlay patch to be routed easily with a router cutter to create perfect inlays. A Unibase may be required for certain mak..."
Price: 7.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 15mm 32mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.7 mm C: 1 1/4 inch C: 31.8 mm OL..."
Price: 18.95 |
| "Trend Solid Carbide Rasp Router Cutter 12.7mm 19mm 1/4""" |
| "Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). With twin roller bearings, is ideal for following a template bu. Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. D: 1/2 inch..."
Price: 81.95 |
| "Trend Bookcase Strip Rebate Router Cutter 9.5mm 13mm 1/4""" |
| "Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically designed for Tonk Strip. D: 9.5 mm D2: 19 mm C: 13 mm C2: 6 mm OL: 47.6 mm Shank Diameter: 1/4..."
Price: 47.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 50mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 12.7 mm C: 50 mm OL: 93.5 mm Shank Diameter: 1/2..."
Price: 25.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 6.35MM 25mm 1/4""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 19.95 |
| "Trend CRAFTPRO Weatherseal Groover Router Cutter 34mm 2.5mm 1/4""" |
| "Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application allows. Neatly cuts grooves on doors or frames to a..."
Price: 36.95 |
