SpoofCard Caller ID Spoofing Calling Card
| "Trend Replacement Cutter Bearings Metric OD 20mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 10.95 |
| "Trend Snappy Hex Shank Masonry Drill Bit 8mm" |
| "Tungsten Carbide Tipped masonry drill to suit wall plugs. D: 8 mm OL: 142 mm Flute length: 63 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 8 Overall Length Metric: 142..."
Price: 4.49 |
| "Trend Router Plug Maker 16mm 16mm 1/4""" |
| "These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. D: 16 mm C: 16 mm OL: 55 mm Shank Diameter: 1/4 inch Body: 22 mm Shank Diameter: 1/4 Dia M..."
Price: 44.95 |
| "Trend CRAFTPRO Bearing Guided Corner Bead Router Cutter 26mm 16mm 8mm" |
| "Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. D: 1 1/32 inch D: 26 mm D2: 22 mm C: 5/8 inch C: 16 mm B: 15.9 mm R: 4.8 mm OL: 67.5 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Met..."
Price: 37.95 |
| "Trend Chamfer V Groove Router Cutter 25.4mm 13mm 1/2""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 25.4 mm C: 13 mm C2: 17.5 mm A: 45 degrees OL: 57 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 25.4 Dia..."
Price: 48.95 |
| "Trend CRAFTPRO Wood Cutting Cordless Saw Blade 190mm 24T 20mm" |
| "Non-stick PTFE coat to prevent resin build up and increase sawblade life. Sawblades designed for a professional finish in soft wood, hard wood, particle board, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip..."
Price: 15.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.1mm 25.4mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 9/32 inch D: 7.1 mm C: 1 inch C: 25.4 mm OL: 67..."
Price: 11.95 |
| "Trend Staff Bead Bearing Gudied Router Cutter 35.2mm 35mm 1/2""" |
| "Ideal for producing nosings and attractive edges. D: 35.2 mm C: 35 mm B: 16 mm R: 9.5 mm OL: 83 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35.2 Cut Length Metric: 35 Overall Length Metric: 83 Bearing Dia Metric: 16 Rad..."
Price: 63.95 |
| "Trend CRAFTPRO Dovetail Jig Router Cutter 14.3mm 12.7mm 1/4""" |
| "To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. D: 14.3 mm D2: 12.7 mm C: 1/2 inch C: 12.7 mm OL: 55 mm A: 104 degrees Shank Diameter: 1/4 inch With spurs For Elu/DeWalt &..."
Price: 13.95 |
| "Trend Dovetail Cutter for DC400 Jig 11.3mm 6.35mm 1/4""" |
| "Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks. D: 11.3 mm C: 6.35 mm OL: 56 mm A: 110 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 11.3 Cut Length Metric: 6.35 Overall Length ..."
Price: 18.95 |
| "Trend Drawer Pull Router Cutter 38mm 17mm 1/2""" |
| "An initial cut with a straight cutter is required to produce the drawer pull profile. D: 38 mm D2: 22 mm C: 17 mm R: 6 mm OL: 61 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 38 Dia2 Metric: 22 Cut Length Metric: 17 Overa..."
Price: 81.95 |
| "Trend CRAFTPRO Bearing Guided Large Radius Panel Raiser Router Cutter 86mm 12.7mm 1/2""" |
| "Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass...."
Price: 59.95 |
| "Trend CRAFTPRO Bearing Guided Hand Rail Router Cutter 32mm 38mm 1/2""" |
| "Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top. D: 32 mm C: 38 mm B: 16 mm R: 9.5 mm R2: 12.5 mm OL: 86.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 32 Cut Le..."
Price: 54.95 |
| "Trend CRAFTPRO Two Flute Deep Pocket Router Cutter 6.3mm 19mm 1/4""" |
| "A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut up to half t..."
Price: 15.95 |
| "Trend CRAFTPRO Bearing Guided Radius Panel Raiser and Back Router Cutter 88.9mm 16mm 1/2""" |
| "Panel raiser cutters for producing the panel for cabinet panelled doors. The tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.3mm. Must be used in a stationary variable speed router either mounted overhead or inverted..."
Price: 97.95 |
| "Trend CRAFTPRO Bearing Guided Corner Bead Router Cutter 38.1mm 16mm 1/2""" |
| "Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. D: 38.1 mm D2: 34.7 mm C: 26 mm B: 16 mm R: 9.5 mm OL: 74 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 38.1 Dia2 Metric: 34..."
Price: 44.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.55mm 25.4mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.55 mm C: 1 inch C: 25.4 mm OL: 6..."
Price: 14.95 |
| "Trend Plastic and Engraving Mini Spiral Upcut Router Cutter 2mm 6mm 3mm" |
| "Range of small diameter shank cutters for CNC routers. Used for specialised applications including signmaking & PRB machining. Up-cut prevents burning in plunge cuts. Two flute. D: 2 mm C: 6 mm OL: 38 mm Shank Diameter: 3 mm Shank Diameter: ..."
Price: 33.95 |
| "Trend Lip and Spur Two Wing Machine Bit 32mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 53.95 |
| "Trend TRADE RANGE Bearing Guided Roman Ogee Router Cutter 25.4mm 1/4""" |
| "Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched ..."
Price: 35.95 |
| "Trend CRAFTPRO Intumescent Recesser Bearing Guided Router Cutter 40mm 15mm 1/2""" |
| "Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. To suit 4mm thick strip of 15mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearin..."
Price: 41.95 |
| "Trend Cove Bearing Guided Router Cutter 34.9mm 16mm 1/2""" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D: 34.9 mm C: 16 mm B: 9.5 mm B2: 12.7 mm R: 1/2 inch R: 12.7 mm OL: 64 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 34.9 Cut Length Met..."
Price: 60.95 |
| "Trend T Slotter and Slat Wall Cutter 28mm 4mm 3/8""" |
| "A range of heavy duty 'T' slot cutters for clamping and hanging applications. MEC mechanical feed only. D: 28 mm D2: 11.2 mm C: 4 mm R: 2 mm OL: 52 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Metric: 28 Dia2 Metric: 11.2 Cut Lengt..."
Price: 45.95 |
| "Trend Slow Spiral HSS Twist Drill 5/16""" |
| "Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. D: 5/16 inch D: 7.9 mm OL: 117 mm Shank..."
Price: 13.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 32mm 16mm 8mm" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 46.95 |
| "Trend STC Spiral Upcut Plastic Router Cutter 6.35MM 19mm 1/4""" |
| "Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards, solid surface material and foam boards. Single O flute design for fast cutting. Increased feed rates allowing for mo..."
Price: 62.95 |
| "Trend Bearing Guided Plaque Frame Router Cutter 27mm 12.7mm 1/4""" |
| "A guided radius with bevel cutter to accent the base of award plaques, name plaques, display stands etc. D: 27 mm C: 12.7 mm OL: 64 mm B: 12.7 mm R: 4.8 mm A: 22.5 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 27 Cut ..."
Price: 21.95 |
| "Trend TCT Cylinder Boring Bit 203 Series 40mm" |
| "Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat..."
Price: 79.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 19mm 1/2""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 18.95 |
| "Trend CRAFTPRO Bead Ovolo Router Cutter 5.5mm 17.5mm 1/4""" |
| "This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced. D: 34.5 mm C: 11/16 inch C: 17.5 mm B: 9.5 mm B2: 12.7 mm R: 5.5 mm R2: 5.5 mm OL: 69 mm Shank Diameter: 1..."
Price: 34.95 |
| "Trend Rota-Tip Two Replaceable Blade Router Cutter 19.1mm 50mm 1/2""" |
| "Used for rough cutting only & have staggered blades. Not recommended for plunge cutting unless ramped into workpiece. D: 3/4 inch D: 19.1 mm C: 50 mm OL: 107 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/..."
Price: 63.95 |
