SpoofCard Caller ID Spoofing Calling Card
| "Trend Chamfer V Groove Router Cutter 32mm 15mm 1/2""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 32 mm C: 15 mm C2: 22 mm A: 45 degrees OL: 63.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 32 Cut Lengt..."
Price: 48.95 |
| "Trend TCT Hinge Sinking Router Bit 15mm 3/8""" |
| "These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. D: 15 mm OL: 60 mm Shank Diameter: 3/8 inch Sh..."
Price: 49.95 |
| "Trend STC Spiral Upcut Router Cutter 4.75mm 19mm 1/4""" |
| "Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plu..."
Price: 35.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 150mm 24T 20mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spind..."
Price: 12.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 8mm 14mm 1/4""" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 20.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 24.7m 12mm 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 53.95 |
| "Trend TCT Through Drill 201 Series 8mm 25mm 10mm" |
| "Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. ..."
Price: 23.95 |
| "Trend Bearing Guided Double Rounding Over Set 16mm 9mm 1/2""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. Two rounded corners can be cut simultaneously. D: 22 mm C: 9 mm B: 16 mm R: 3 mm OL: 76 mm Shank Diameter: 1/2 inc..."
Price: 121.95 |
| "Trend Snappy TCT Drill Countersinks Size 6" |
| "Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only. D: 3/8 inch D: 9.5 mm D2: 3/32..."
Price: 13.95 |
| "Trend CRAFTPRO Single Flute Router Cutter 6.3mm 12.7mm 1/4""" |
| "Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. D: 1/4 inch D: 6.3 mm C: 1/2..."
Price: 9.95 |
| "Trend CRAFTPRO Bead Ovolo Router Cutter 4mm 12.7mm 1/4""" |
| "This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced. D: 28 mm C: 1/2 inch C: 12.7 mm B: 9.5 mm B2: 12.7 mm R: 4 mm R2: 4 mm OL: 64 mm Shank Diameter: 1/4 inch ..."
Price: 32.95 |
| "Trend Router Collet Reduction Sleeve 9.5mm 6.35mm" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work. D: 3/8 inch D: 9.5 m..."
Price: 10.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 50mm 2mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 50 mm Bore: M12 Kerf: 2 mm No. of Teeth: 4 Dia Metric: 50 Sawbore: M12 Saw Kerf Metric: 2 Saw Teeth: 4..."
Price: 59.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 25.4mm 13mm 8mm" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 44.95 |
| "Trend Mitre Corner Rouiter Cutter 35mm 25mm 1/2""" |
| "This cutter makes a lapped mitre joint in timbers. Cutters ref.10/20X1/2TC and 10/21X1/2TC are used together to create the lapped mitre joint. D: 35 mm D2: 15 mm C: 25 mm A: 45 degrees OL: 62 mm Shank Diameter: 1/2 inch Timber thickness min...."
Price: 85.95 |
| "Trend HSSE Spiral Upcut Non Ferrous Metal Router Cutter 5mm 40mm 8mm" |
| "Two flute helical up-cut cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mate..."
Price: 37.95 |
| "Trend CRAFTPRO Dovetail Jig Router Cutter 19.7mm 16mm 1/4""" |
| "To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. D: 19.7 mm D2: 17.5 mm C: 5/8 inch C: 16 mm OL: 56 mm A: 104 degrees Shank Diameter: 1/4 inch With spurs For Titan 14 mm co..."
Price: 14.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 10mm 14mm 1/4""" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 27.95 |
| "Trend Bearing Self Guided Rebate Router Cutter 35mm 12.7mm 8mm" |
| "These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. D: 1 3/8 inches D: 35 mm C: 1/2 inch C: 12.7 mm B: 9..."
Price: 26.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 8mm 19mm 1/4""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.9mm 25.4mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/16 inch D: 7.9 mm C: 1 inch C: 25.4 mm Ol: 71..."
Price: 11.95 |
| "Trend PCD Disposable MDF Router Cutter 15.9mm 25.4mm 1/2""" |
| "Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC routers..."
Price: 205.95 |
| "Trend Router Collet Reduction Sleeve 6.35mm 3.2mm" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work. D: 1/4 inch D: 6.35 ..."
Price: 20.95 |
| "Trend CRAFTPRO Staff Bead Router Cutter 8mm 30mm 1/2""" |
| "These staff bead are ideal for producing nosings and attractive edges. Edge cut only. D: 27 mm C: 30 mm OL: 2 19/32inch OL: 68 mm R: 8 mm Shank Dia.: 1/2 inch Shank Diameter: 1/2 Dia Metric: 27 Dia Imperial: 1 1/16 Cut Length Metric: 3..."
Price: 47.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 40mm 2.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 40 mm Kerf: 2.5 mm No. of Teeth: 2 Dia Metric: 40 Sawb..."
Price: 22.95 |
| "Trend Double Bearing Guided Trimmer Routing Cutter 19.1mm 25.4mm 12mm" |
| "Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more easily, by turning component other way up. D: 3/4 ..."
Price: 50.95 |
| "Trend TCT Grooving Cutter 125mm 12mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 126.95 |
| "Trend STC Spiral Upcut Router Cutter 12.7mm 50mm 1/2""" |
| "Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plu..."
Price: 146.95 |
| "Trend Snappy TCT Drill Countersinks Size 8" |
| "Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only. D: 3/8 inch D: 9.5 mm D2: 7/64..."
Price: 13.95 |
| "Trend Lip and Spur Two Wing Machine Bit 29mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 53.95 |
| "Trend CRAFTPRO Bearing Guided Corner Bead Router Cutter 22.3mm 14mm 1/4""" |
| "Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. D: 7/8 inch D: 22.3 mm D2: 20 mm C: 35/64 inch C: 14 mm B: 12.7 mm R: 3.2 mm OL: 65.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia..."
Price: 35.95 |
