SpoofCard Caller ID Spoofing Calling Card
| "Draper Expert Tile and Glass Drill Bit 7mm" |
| "For use on glass mirrors, floor tiles and quarry tiles. Must only be used with variable speed power drills Size: 7mm..."
Price: 3.49 |
| "Draper Expert Tile and Glass Drill Bit 8mm" |
| "For use on glass mirrors, floor tiles and quarry tiles. Must only be used with variable speed power drills Size: 8mm..."
Price: 3.49 |
| "Draper SWP200 Submersible Dirty Water Pump 240v" |
| "Ideal for pumping out clean water for general irrigation and other similar applications. Fitted with thermal overload protection and float switch that automatically turns the water pump off when water level has dropped. 10M (approx.) cable and approv..."
Price: 65.95 |
| "Dremel 9934 Tungsten Carbide Structured Tooth Cutter 7.8mm Pack of 1" |
| "Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 7,..."
Price: 19.95 |
| "Bosch HSS-G Drill Bit 12.7mm Pack of 5" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 39.95 |
| "Bosch HSS-G Drill Bit 5.8mm Pack of 10" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 13.95 |
| "Bosch 3 Piece 89mm Long Phillips Screwdriver Bit Set" |
| "It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are achievable thanks to the bit´s S2 Modified Steel a..."
Price: 10.95 |
| "Bosch Multi Material Cutting Mitre and Table Saw Blade 210mm 80T 30mm" |
| "The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials. The Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials. Its high-quality precision..."
Price: 32.95 |
| "Bosch HSS-G Drill Bit 4.8mm Pack of 10" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 10.95 |
| "Bosch HSS-G Drill Bit 3.7mm Pack of 10" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 8.95 |
| "Bosch 3 Piece Extra Hard Torx Screwdriver Bit Set" |
| "It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are achievable thanks to the bit´s S2 Modified Steel a..."
Price: 17.95 |
| "Bosch HSS-G Drill Bit 10.2mm Pack of 5" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 24.95 |
| "Bosch Genuine GBA 36v Cordless CoolPack Li-ion Battery 2ah 2ah" |
| "With their high-performance cells, Bosch lithium-ion battery packs can handle extreme loads with the lowest possible energy loss. They impress with their low weight, robustness and long battery runtime.Features & Benefits:•..."
Price: 160.95 |
| "Bosch HSS-G Drill Bit 3.1mm Pack of 10" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 7.49 |
| "Draper 200A Earth Lead and Clamp with 10/25 Dinse Plug" |
| "Plug: Earth Clamp 10/25..."
Price: 29.95 |
| "Draper PCL Airflow Coupling Parallel Female Thread 3/8"" Bsp Pack of 1" |
| "For use with standard adaptors. BSP parallel. Positive lock single action ideally suited for most compressed air applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100 psi). Maximum working pressure 13.8bar (200psi). Thread: 3/8"" Typ..."
Price: 11.95 |
| "Draper Mortice Chisel and Bit 3/8""" |
| "B>I>Expert Quality/I>/B>, manufactured from high carbon steel hardened and tempered. Chisels are finely ground and polished with honed cutting edges. Chisel shank diameter 13/16"" (Stock No. 48080 is 1.3/16""). Mortice Square: 3/8"" Mortice Dept..."
Price: 58.95 |
| "Bosch Adjustable Wet Diamond Hole Saw Centering Guide" |
| "This Centring Aid is appropriate for use with cordless drill drivers. The Centring Aid is for drilling holes into tiles without a pilot drill bit to save time and effort. It keeps the holesaw in place to drill a hole in an exact location without wand..."
Price: 47.95 |
| "Bosch HSS-Co Cobalt Drill Bit 11mm Pack of 5" |
| "The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear r..."
Price: 55.95 |
| "Draper PCL Tailpieces Male Thread 1/2 Bsp 1/2"" Pack of 3" |
| "1/2"" thread size with BSP taper. three tailpieces per card. Bore: 1/2"" For Hose: 12.7mm..."
Price: 9.95 |
| "Draper PCL Airflow Coupling Parallel Female Thread 1/2"" Bsp Pack of 1" |
| "For use with standard adaptors. BSP parallel. Positive lock single action ideally suited for most compressed air applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100 psi). Maximum working pressure 13.8bar (200psi). Thread: 1/2"" Typ..."
Price: 11.95 |
| "Draper Soft Grip Mig Welders Pliers 210mm" |
| "Aids MIG welding including removal of spatter from in and around the shroud, drawing out and cutting off wire and removing contact tips and shrouds. Spring-loaded jaws with soft grip handles...."
Price: 17.95 |
| "Draper Workshop Air Line Hose 6mm 15m" |
| "PVC air line hoses for the workshop and industrial user, Supplied with zinc plated fittings. Manufactured to BS EN ISO 5774 Specifications Size: 6mm Length: 15M Connection: 1/4"" BSP Male Description: 16bar/230psi Internal x External Dia.: 6..."
Price: 25.95 |
| "Bosch HSS-Co Cobalt Drill Bit 3.5mm Pack of 10" |
| "The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear r..."
Price: 18.95 |
| "Bosch HSS-G Drill Bit 5.5mm Pack of 10" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 12.95 |
| "Bosch HSS-G Drill Bit 12mm Pack of 5" |
| "The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-po..."
Price: 34.95 |
| "Draper Straight Router Cutter 12.7mm 50mm 1/2""" |
| "Shank Dia.: 1/2" Description: Straight 12.7 x 50mm, twin flute..."
Price: 7.49 |
| "Draper PCL Airflow Coupling Tapered Male Thread 3/8"" Bsp Pack of 1" |
| "For use with standard adaptors. BSP parallel. Positive lock single action ideally suited for most compressed air applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100 psi). Maximum working pressure 13.8bar (200psi). Thread: 3/8"" Typ..."
Price: 11.95 |
| "Draper Metric Euro Coupling Air Line Hose Tailpiece M10" |
| "• For heavy duty high flow applications• Tested to over 1million cycles• Connects to most popular and European adaptor profiles (Cejn, Rectus etc.)• &nb..."
Price: 13.95 |
| "Draper Metric Pcl Euro Air Line Adaptor Hose Tailpiece M10" |
| "• For heavy duty high flow applications• Tested to over 1 million cycles• Connects to most popular and European adaptor profiles (Cejn, Rectus etc.)• &n..."
Price: 2.95 |
| "Dremel EZ SpeedClic 11 Piece Cutting Disc Set" |
| "Assortment of 10 SpeedClic cutting wheels and the special SpeedClic mandrel. Besides 6 regular 38 mm metal cutting wheels the kit includes 2 special thin cutting wheels and 2 unique plastic cutting wheels.Set Contents:2 x (SC409..."
Price: 25.95 |
