SpoofCard Caller ID Spoofing Calling Card
| "Bulldog SP10S Steel Handle Square Punner 4.5kg (10lb)" |
| Steel-Handle-Square-Punner-4-5kg-10lb-Bulldog-SP10S-p-The-Bulldog-Square-Punner-tamper-has-a-one-piece-head-design-and-a-large-square-solid-cast-head-The-handle-is-made-from-tubular-steel-It-is-ideal-for-finishing-work-on-asphalt-surface-to-tamp-up-close-to-walls-and-corners-where-mechanical-rollers-leave-ridges-or-cannot-get-access-p-p-Part-of-Bulldog-s-Premier-Agricultural-Tool-range-manufactured-to-the-highest-possible-specification-to-guarantee-quality-Made-In-Britain-p
Price: 31.55 |
| "Bulldog 5TM2MYD Taper Shovel No.2 28in MYD 5TM2MYD" |
| Taper-Shovel-No-2-28in-MYD-5TM2MYD-Bulldog-5TM2MYD-p-A-solid-forged-taper-mouth-shovel-that-is-ideal-for-trench-work-concrete-mixing-and-general-shovelling-It-has-an-unvarnished-hardwood-handle-with-a-metal-YD-hilt-with-a-wooden-cross-dowel-for-added-comfort-p-p-Size-No-2-br-Blade-310-x-250mm-12-x-10in-p-Bulldog-5TM2MYD-Taper-Shovel-No-2-28in-MYD-5TM2MYD
Price: 24.82 |
| "Bulldog 2309105470 West Country Shovel" |
| West-Country-Shovel-Bulldog-2309105470-p-West-Country-round-mouthed-open-socket-shovel-from-Bulldog-s-Premier-range-It-has-its-origin-in-specific-areas-where-long-ash-shafts-are-preferred-because-of-the-extra-leverage-they-generate-The-timber-used-for-the-handle-and-shaft-has-a-very-low-moisture-content-to-avoid-shrinkage-or-splitting-The-open-socket-blade-is-hardened-and-tempered-so-it-can-be-used-for-light-digging-as-well-as-for-moving-loose-materials-such-as-shingle-sand-and-gravel-
Price: 30.28 |
| "Carver C301242 Multiclamp 3-in-1 Clamp with Carry Case" |
| Multiclamp-3-in-1-Clamp-with-Carry-Case-Carver-C301242-p-The-Carver-Multiclamp-is-a-combination-of-the-3-most-popular-Carver-clamps-It-comes-with-interchangeable-heads-and-a-dedicated-carry-case-for-easy-transportation-and-storage-p-p-Standard-Long-Reach-15-300mm-br-Clamping-Force-Standard-8500-daN-Long-425-daN-p-Carver-C301242-Multiclamp-3-in-1-Clamp-with-Carry-Case
Price: 197.46 |
| "Carver 301003 T186-150 Standard-Duty Rack Clamp 15cm" |
| "T186-150 Standard-Duty Rack Clamp 15cm - Carver 301003, The Carver Standard-Duty Rack Clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T186-150 Standard-Duty Rack Clamp has the following specifications: Capacity: 150mm (6in).Reach: 60mm (2.3/8in).Overall Length: 245mm (9.3/4in).Clamping Force: 11,300N.Weight: 1.4kg. Carver 301003 T186-150 Standard-Duty Rack Clamp 15cm"
Price: 75.28 |
| "Carver 301005 T186-300 Standard-Duty Rack Clamp 30cm" |
| "T186-150 Standard-Duty Rack Clamp 15cm - Carver 301005, The Carver Standard-Duty Rack Clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T186-300 Standard-Duty Rack Clamp has the following specifications: Capacity: 300mm (12in).Reach: 60mm (2.3/8in).Overall Length: 395mm (15.1/2in).Clamping Force: 11,300N.Weight: 1.8kg. Carver 301005 T186-300 Standard-Duty Rack Clamp 30cm"
Price: 87.89 |
| "Carver 301009 T186-500 Standard-Duty Rack Clamp 50cm" |
| "T186-150 Standard-Duty Rack Clamp 15cm - Carver 301009, The Carver Standard-Duty Rack Clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T186-300 Standard-Duty Rack Clamp has the following specifications: Capacity: 500mm (20in).Reach: 60mm (2.3/8in).Overall Length: 640mm (25.1/8in).Clamping Force: 11,300N.Weight: 2.5kg. Carver 301009 T186-500 Standard-Duty Rack Clamp 50cm"
Price: 101.63 |
| "Carver 301000 T186-2 Standard-Duty Moveable Jaw" |
| T186-2-Standard-Duty-Moveable-Jaw-Carver-301000-p-The-Carver-T186-2-Standard-Duty-Moveable-Jaws-are-suitable-for-all-186-Series-Clamps-and-186-Series-Bars-p-Carver-301000-T186-2-Standard-Duty-Moveable-Jaw
Price: 40.25 |
| "Carver 301011 T186-600-1 Standard-Duty Bar Only 60cm" |
| T186-600-1-Standard-Duty-Bar-Only-60cm-Carver-301011-p-The-Carver-T186-600-Standard-Duty-Bar-utilises-the-same-jaws-as-its-rack-clamp-equivalents-It-can-be-used-either-for-clamping-or-jacking-apart-p-p-Size-60cm-24in-p-Carver-301011-T186-600-1-Standard-Duty-Bar-Only-60cm
Price: 66.59 |
| "Carver 301035 T285-225 Medium-Duty Long Reach Rack Clamp 22.5cm" |
| "T285-225 Medium-Duty Long Reach Rack Clamp 22.5cm - Carver 301035, These clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work. Medium/long reach jaws.Capacity: 225mm (9in).Reach: 200mm (8in).Overall Length: 420mm (16.1/2in).Clamping Force: 9,000N.Weight 7.1kg. Carver 301035 T285-225 Medium-Duty Long Reach Rack Clamp 22.5cm"
Price: 221.75 |
| "Carver 301037 T285-450 Medium-Duty Long Reach Rack Clamp 45cm" |
| "T285-225 Medium-Duty Long Reach Rack Clamp 22.5cm - Carver 301037, These clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work. Medium/long reach jaws.Capacity: 450mm (18in).Reach: 200mm (8in).Overall Length: 655mm (25.3/4in).Clamping Force: 9,000N.Weight 8.5kg. Carver 301037 T285-450 Medium-Duty Long Reach Rack Clamp 45cm"
Price: 251.70 |
| "Carver 301034 T285-2 Medium-Duty Long Reach Moveable Jaw" |
| T285-2-Medium-Duty-Long-Reach-Moveable-Jaw-Carver-301034-p-This-medium-moveable-jaw-is-suitable-for-all-285-series-clamps-also-290-285-series-bars-p-Carver-301034-T285-2-Medium-Duty-Long-Reach-Moveable-Jaw
Price: 118.45 |
| "Carver 301046 T290-225 Medium-Duty Rack Clamp 22.5cm" |
| "T290-225 Medium-Duty Rack Clamp 22.5cm - Carver 301046, The Carver Medium-Duty Rack Clamps have a variety of uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T290-225 Medium-Duty Rack Clamp has the following specification: Capacity: 225mm (9in).Reach: 90mm (3.1/2in). Overall Length: 420mm (16.1/2in).Clamping Force: 1,800N.Weight: 5.5kg. Carver 301046 T290-225 Medium-Duty Rack Clamp 22.5cm"
Price: 191.17 |
| "Carver 301049 T290-450 Medium-Duty Rack Clamp 45cm" |
| "T290-225 Medium-Duty Rack Clamp 22.5cm - Carver 301049, The Carver Medium-Duty Rack Clamps have a variety of uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T290-450 Medium-Duty Rack Clamp has the following specification: Capacity: 450mm (18in).Reach: 90mm (3.1/2in). Overall Length: 655mm (25.3/4in).Clamping Force: 1,800N.Weight: 7.0kg. Carver 301049 T290-450 Medium-Duty Rack Clamp 45cm"
Price: 211.48 |
| "Carver 301043 T290-2 Medium-Duty Moveable Jaw" |
| T290-2-Medium-Duty-Moveable-Jaw-Carver-301043-p-The-Carver-T290-2-Medium-Duty-Moveable-Jaw-is-suitable-for-use-with-all-290-Series-Rack-Clamps-and-also-290-Series-Bars-p-Carver-301043-T290-2-Medium-Duty-Moveable-Jaw
Price: 100.63 |
| "Carver 301101 T321-250 Standard-Duty Long Reach Rack Clamp 25cm" |
| "T321-250 Standard-Duty Long Reach Rack Clamp 25cm - Carver 301101, The Carver Standard-Duty Long Reach Rack Clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T321-250 Standard-Duty Long Reach Rack Clamp has the following specifications: Capacity: 250mm (10in).Reach: 120mm (4.3/4in).Overall Length: 360mm (14.1/8in).Clamping Force: 5,650N.Weight: 2.0kg. Carver 301101 T321-250 Standard-Duty Long Reach Rack Clamp 25cm"
Price: 114.52 |
| "Carver 301313 T321-600 Standard-Duty Long Reach Rack Clamp 60cm" |
| "T321-250 Standard-Duty Long Reach Rack Clamp 25cm - Carver 301313, The Carver Standard-Duty Long Reach Rack Clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T321-600 Standard-Duty Long Reach Rack Clamp has the following specifications: Capacity: 600mm (24in).Reach: 120mm (4.3/4in) Overall Length: 715mm (28.3/16in).Clamping Force: 5,650N.Weight: 3.5kg. Carver 301313 T321-600 Standard-Duty Long Reach Rack Clamp 60cm"
Price: 159.35 |
| "Carver 301100 T321-2 Standard-Duty Long Reach Moveable Jaw" |
| T321-2-Standard-Duty-Long-Reach-Moveable-Jaw-Carver-301100-p-The-Carver-T321-2-Standard-Duty-Long-Reach-Moveable-Jaws-are-suitable-for-all-321-Series-Rack-Clamps-and-186-321-Series-Bars-p-Carver-301100-T321-2-Standard-Duty-Long-Reach-Moveable-Jaw
Price: 46.38 |
| "Coleman 3000004539 C300 Performance Butane/Propane Gas Cartridge 240g" |
| C300-Performance-Butane-Propane-Gas-Cartridge-240g-Coleman-3000004539-p-The-Coleman-C300-Performance-Gas-offers-a-70-30-butane-propane-gas-mixture-in-a-threaded-self-sealing-cartridge-with-safety-valve-It-s-compatible-with-all-Coleman-resealable-appliances-p-p-Caution-This-Product-is-Highly-Flammable-p-Coleman-3000004539-C300-Performance-Butane-Propane-Gas-Cartridge-240g
Price: 4.13 |
| "Crescent® CCP8V 2-in-1 Combo Pivot Pro Linesman/Wire Pliers" |
| 2-in-1-Combo-Pivot-Pro-Linesman-Wire-Pliers-Crescent-CCP8V-p-These-Crescent-2-in-1-Pliers-combines-the-strength-of-a-lineman-s-plier-and-the-functionality-of-a-wire-stripper-The-wire-stripper-can-strip-from-20-to-10-gauge-wire-and-the-linesman-s-plier-easily-twists-wires-together-for-secure-connections-Wire-can-be-cut-with-either-the-plier-or-the-wire-stripper-After-stripping-the-wire-the-stripper-s-narrow-plier-nose-can-be-used-to-make-extremely-accurate-bends-Fitted-with-ergonomic-dua
Price: 48.59 |
| "Crescent® DB16 Adjustable Pry Bar with Nail Puller 400mm (16in)" |
| "Adjustable Pry Bar with Nail Puller 400mm (16in) - Crescent DB16, The Crescent Adjustable Pry Bar has adjustable jaws with teeth on both the upper and lower jaws for maximum grip. At the other end of the bar there is a crow bar end for prying and pulling. When the jaws are fully closed there is a striking face, meaning it can also be used as a hammer. There is also an integrated nail puller. It is fitted with an ergonomic handle for maximum grip and reduced vibration during use.1 x Crescent Adjustable Pry Bar with Nail Puller 400mm (16in) Crescent® DB16 Adjustable Pry Bar with Nail Puller 400mm (16in)"
Price: 47.93 |
| "Crescent® DB24 Adjustable Pry Bar with Nail Puller 600mm (24in)" |
| "Adjustable Pry Bar with Nail Puller 400mm (16in) - Crescent DB24, The Crescent Adjustable Pry Bar has adjustable jaws with teeth on both the upper and lower jaws for maximum grip. At the other end of the bar there is a crow bar end for prying and pulling. When the jaws are fully closed there is a striking face, meaning it can also be used as a hammer. There is also an integrated nail puller. It is fitted with an ergonomic handle for maximum grip and reduced vibration during use.1 x Crescent Adjustable Pry Bar with Nail Puller 600mm (24in) Crescent® DB24 Adjustable Pry Bar with Nail Puller 600mm (24in)"
Price: 57.85 |
| "Crescent® CCWS1 Combination Wrench Set, 6 Piece" |
| "CCWS1 Combination Wrench Set, 6 Piece - Crescent CCWS1, Crescent Metric Combination Wrenches are made from chrome vanadium alloy steel that has been heat-treated for maximum strength and long-lasting durability. They have been coated with a nickel chrome plating and buffed to a mirror polish finish. Surface drive® technology on box-end virtually eliminates fastener rounding. Sizes have been stamped on both sides for easy identification. CCWS1: 6 Piece: 8, 9, 10, 12, 13 & 14mmCCWS3: 10 Piece: 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mmCCWS5: 15 Piece: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 21mmThe Crescent CCWS1 Metric Combination Wrench Set of 6, contains the following: Sizes: 8, 9, 10, 12, 13 & 14mm Crescent® CCWS1 Combination Wrench Set, 6 Piece"
Price: 21.94 |
| "Crescent® CCWS3 Combination Wrench Set, 10 Piece" |
| "CCWS1 Combination Wrench Set, 6 Piece - Crescent CCWS3, Crescent Metric Combination Wrenches are made from chrome vanadium alloy steel that has been heat-treated for maximum strength and long-lasting durability. They have been coated with a nickel chrome plating and buffed to a mirror polish finish. Surface drive® technology on box-end virtually eliminates fastener rounding. Sizes have been stamped on both sides for easy identification. CCWS1: 6 Piece: 8, 9, 10, 12, 13 & 14mmCCWS3: 10 Piece: 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mmCCWS5: 15 Piece: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 21mmThe Crescent CCWS3 Metric Combination Wrench Set of 10, contains the following: Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mm Crescent® CCWS3 Combination Wrench Set, 10 Piece"
Price: 38.76 |
| "Crescent® CCWS5 Combination Wrench Set, 15 Piece" |
| "CCWS1 Combination Wrench Set, 6 Piece - Crescent CCWS5, Crescent Metric Combination Wrenches are made from chrome vanadium alloy steel that has been heat-treated for maximum strength and long-lasting durability. They have been coated with a nickel chrome plating and buffed to a mirror polish finish. Surface drive® technology on box-end virtually eliminates fastener rounding. Sizes have been stamped on both sides for easy identification. CCWS1: 6 Piece: 8, 9, 10, 12, 13 & 14mmCCWS3: 10 Piece: 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mmCCWS5: 15 Piece: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 21mmThe Crescent CCWS5 Metric Combination Wrench Set of 15, contains the following: Sizes: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 21mm Crescent® CCWS5 Combination Wrench Set, 15 Piece"
Price: 69.60 |
| "Crescent® C10CVN Curved Jaw Locking Pliers with Wire Cutter 254mm ..." |
| "Curved Jaw Locking Pliers with Wire Cutter 254mm (10in) - Crescent C10CVN, These Crescent Curved Jaw Locking Pliers have a nickel plated finish that resists rust and corrosion for increased durability. The versatile curved jaw features an angled tooth design for increased grip and an integral wire cutter. The compound gripping action produces a powerful, non-slip locking grip. The red plastic dipped release lever provides improved comfort and Crescent brand identity. An aggressive grip pattern has been added to the tightening knurls. The handle also features a hex key receiving hole for increased torque and convenience.These Crescent Curved Jaw Locking Pliers have the following specification: Length: 254mm (10in)Capacity: 48mm (1.7/8in) Crescent® C10CVN Curved Jaw Locking Pliers with Wire Cutter 254mm (10in)"
Price: 13.81 |
| "Crescent® C5CVN Curved Jaw Locking Pliers with Wire Cutter 127mm (5in)" |
| "Curved Jaw Locking Pliers with Wire Cutter 254mm (10in) - Crescent C5CVN, These Crescent Curved Jaw Locking Pliers have a nickel plated finish that resists rust and corrosion for increased durability. The versatile curved jaw features an angled tooth design for increased grip and an integral wire cutter. The compound gripping action produces a powerful, non-slip locking grip. The red plastic dipped release lever provides improved comfort and Crescent brand identity. An aggressive grip pattern has been added to the tightening knurls. The handle also features a hex key receiving hole for increased torque and convenience.These Crescent Curved Jaw Locking Pliers have the following specification: Length: 127mm (5in)Capacity: 32mm (1.1/4in) Crescent® C5CVN Curved Jaw Locking Pliers with Wire Cutter 127mm (5in)"
Price: 10.07 |
| "Crescent® C7CVN Curved Jaw Locking Pliers with Wire Cutter 178mm (7in)" |
| "Curved Jaw Locking Pliers with Wire Cutter 254mm (10in) - Crescent C7CVN, These Crescent Curved Jaw Locking Pliers have a nickel plated finish that resists rust and corrosion for increased durability. The versatile curved jaw features an angled tooth design for increased grip and an integral wire cutter. The compound gripping action produces a powerful, non-slip locking grip. The red plastic dipped release lever provides improved comfort and Crescent brand identity. An aggressive grip pattern has been added to the tightening knurls. The handle also features a hex key receiving hole for increased torque and convenience.These Crescent Curved Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 40mm (1.9/16in) Crescent® C7CVN Curved Jaw Locking Pliers with Wire Cutter 178mm (7in)"
Price: 12.72 |
| "Crescent® CLP2SETN Curved Jaw Locking Pliers with Wire Cutter Set ..." |
| "Curved Jaw Locking Pliers with Wire Cutter 254mm (10in) - Crescent CLP2SETN, These Crescent Curved Jaw Locking Pliers have a nickel plated finish that resists rust and corrosion for increased durability. The versatile curved jaw features an angled tooth design for increased grip and an integral wire cutter. The compound gripping action produces a powerful, non-slip locking grip. The red plastic dipped release lever provides improved comfort and Crescent brand identity. An aggressive grip pattern has been added to the tightening knurls. The handle also features a hex key receiving hole for increased torque and convenience.This Set of 2 Crescent Curved Jaw Locking Pliers contains: 1 x C5CVN Curved Jaw Locking Pliers with Wire Cutter 127mm (5in), Capacity: 32mm (1.1/4in) 1 x C10CVN Curved Jaw Locking Pliers with Wire Cutter 254mm (10in), Capacity: 48mm (1.7/8in) Crescent® CLP2SETN Curved Jaw Locking Pliers with Wire Cutter Set 2 Piece"
Price: 24.54 |
| "Crescent® CLP3SETN Curved Jaw Locking Pliers with Wire Cutter Set ..." |
| "Curved Jaw Locking Pliers with Wire Cutter 254mm (10in) - Crescent CLP3SETN, These Crescent Curved Jaw Locking Pliers have a nickel plated finish that resists rust and corrosion for increased durability. The versatile curved jaw features an angled tooth design for increased grip and an integral wire cutter. The compound gripping action produces a powerful, non-slip locking grip. The red plastic dipped release lever provides improved comfort and Crescent brand identity. An aggressive grip pattern has been added to the tightening knurls. The handle also features a hex key receiving hole for increased torque and convenience.This Set of 3 Crescent Curved Jaw Locking Pliers contains: 1 x C5CVN Curved Jaw Locking Pliers with Wire Cutter 127mm (5in), Capacity: 32mm (1.1/4in) 1 x C7CVN Curved Jaw Locking Pliers with Wire Cutter 178mm (7in), Capacity: 40mm (1.9/16in) 1 x C10CVN Curved Jaw Locking Pliers with Wire Cutter 254mm (10in), Capacity: 48mm (1.7/8in) Crescent® CLP3SETN Curved Jaw Locking Pliers with Wire Cutter Set 3 Piece"
Price: 33.82 |
| "Crescent® 728CVNN End Cutting Nipper Pliers 200mm (8in)" |
| "728CVNN End Cutting Nipper Pliers 200mm (8in) - Crescent 728CVNN, Crescent® End Cutting Nipper Pliers are made from drop-forged alloy steel and individually tested for strength and cutting ability. The cutting edges are electronically induction-hardened and have been honed to a fine blade. These pliers have a polished head and double dipped, cushion grip handles. Ideal for general-purpose cutting by both trade professionals and DIY users.1 x Crescent® 728CVNN End Cutting Nipper Pliers 200mm (8in) Crescent® 728CVNN End Cutting Nipper Pliers 200mm (8in)"
Price: 38.05 |
