SpoofCard Caller ID Spoofing Calling Card
| "Trend 9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius" |
| "9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius - Trend 9/71X1/4TC, Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank.R = 3.2 mmD = 22 mmd = 18.9 mmB = 12.7 mm Trend 9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius"
Price: 56.23 |
| "Trend 9/72 x 1/2 TCT Bearing Guided Corner Bead Cutter 4.8 Radius" |
| "9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius - Trend 9/72X1/2TC, Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/2in Shank.R = 4.8 mmD = 28 mmd = 25.7 mmB = 16 mm Trend 9/72 x 1/2 TCT Bearing Guided Corner Bead Cutter 4.8 Radius"
Price: 69.16 |
| "Trend 9/72 x 1/4 TCT Bearing Guided Corner Bead Cutter 4.8 Radius" |
| "9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius - Trend 9/72X1/4TC, Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank. R = 4.8 mmD = 28 mmd = 25.7 mmB = 16 mm Trend 9/72 x 1/4 TCT Bearing Guided Corner Bead Cutter 4.8 Radius"
Price: 69.16 |
| "Trend 9/73 x 1/2 TCT Bearing Guided Corner Bead Cutter 7.0 Radius" |
| "9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius - Trend 9/73X1/2TC, Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/2in Shank.R = 7 mmD = 31.9 mmd = 28.6 mmB = 16 mm Trend 9/73 x 1/2 TCT Bearing Guided Corner Bead Cutter 7.0 Radius"
Price: 76.63 |
| "Trend 9/73 x 1/4 TCT Bearing Guided Corner Bead Cutter 7.0 Radius" |
| "9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius - Trend 9/73X1/4TC, Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank.R = 7 mmD = 31.9 mmd = 28.6 mmB = 16 mm Trend 9/73 x 1/4 TCT Bearing Guided Corner Bead Cutter 7.0 Radius"
Price: 76.63 |
| "Trend 9/74 x 1/2 TCT Bearing Guided Corner Bead Cutter 9.5 Radius" |
| "9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius - Trend 9/74X1/2TC, Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/2in Shank.R = 9.5 mmD = 38.1 mmd = 34.7 mmB = 16 mm Trend 9/74 x 1/2 TCT Bearing Guided Corner Bead Cutter 9.5 Radius"
Price: 81.28 |
| "Trend C115 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 9.5 x 12.7mm" |
| "C115 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 9.5 x 12.7mm - Trend C115X1/4TC, Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT.This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 9.5mmCutting Depth: 12.7mmShank: 1/4in Trend C115 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 9.5 x 12.7mm"
Price: 18.31 |
| "Trend C116 x 1/2 TCT 90° Bearing Guided Trimmer Cutter 12.7 x 25.4mm" |
| "C115 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 9.5 x 12.7mm - Trend C116X1/2TC, Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT.This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/2in Trend C116 x 1/2 TCT 90° Bearing Guided Trimmer Cutter 12.7 x 25.4mm"
Price: 19.21 |
| "Trend C116 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 12.7 x 25.4mm" |
| "C115 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 9.5 x 12.7mm - Trend C116X1/4TC, Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT.This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/4in Trend C116 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 12.7 x 25.4mm"
Price: 19.21 |
| "Trend 46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm" |
| "46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm - Trend 46/09X1/2TC, Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 50 mm Trend 46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm"
Price: 65.03 |
| "Trend 46/90 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 25mm" |
| "46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm - Trend 46/90X1/4TC, Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 15.9 mmC = 25 mm Trend 46/90 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 25mm"
Price: 48.76 |
| "Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 9.5mm" |
| "46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm - Trend 46/91X1/4TC, Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 12.7 mmC = 9.5 mm Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 9.5mm"
Price: 33.42 |
| "Trend 46/92 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 1..." |
| "46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm - Trend 46/92X1/4TC, Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 15.9 mmC = 19.1 mm Trend 46/92 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 19.1mm"
Price: 40.00 |
| "Trend 46/94 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 2..." |
| "46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm - Trend 46/94X1/2TC, Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 25.4 mm Trend 46/94 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 25.4mm"
Price: 61.67 |
| "Trend 46/95 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 2..." |
| "46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm - Trend 46/95X1/4TC, Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 12.7 mmC = 25.4 mm Trend 46/95 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm"
Price: 36.64 |
| "Trend 46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend 46/05X1/4TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank. Angle A = 90° D = 6.3 mmC = 12.7 mm Trend 46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm"
Price: 23.74 |
| "Trend 46/07 x 1/4 TCT 90° Template Profiler 6.3 x 25.4mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend 46/07X1/4TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 6.3 mmC = 25.4 mm Trend 46/07 x 1/4 TCT 90° Template Profiler 6.3 x 25.4mm"
Price: 25.67 |
| "Trend 46/22 x 1/2 TCT 90° Template Profiler 18.2 x 50mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend 46/22X1/2TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90° D = 18.2 mmC = 50 mm Trend 46/22 x 1/2 TCT 90° Template Profiler 18.2 x 50mm"
Price: 75.85 |
| "Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend 46/23X1/2TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90° D = 12.7 mmC = 50 mm Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm"
Price: 75.85 |
| "Trend T46/01 x 1/2 TCT 90° Template Profiler 12.7 x 25mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend T46/01X1/2TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm Trend T46/01 x 1/2 TCT 90° Template Profiler 12.7 x 25mm"
Price: 27.10 |
| "Trend T46/01 x 1/4 TCT 90° Template Profiler 12.7 x 25mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend T46/01X1/4TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 12.7 mmC = 25 mm Trend T46/01 x 1/4 TCT 90° Template Profiler 12.7 x 25mm"
Price: 27.10 |
| "Trend T46/0 x 1/4 TCT 90° Template Profiler 9.5 x 12.7mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend T46/0X1/4TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 9.5 mmC = 12.7 mm Trend T46/0 x 1/4 TCT 90° Template Profiler 9.5 x 12.7mm"
Price: 26.45 |
| "Trend T46/1 x 1/4 TCT 90° Template Profiler 15.9 x 13mm" |
| "46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm - Trend T46/1X1/4TC, Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 15.9 mmC = 13 mm Trend T46/1 x 1/4 TCT 90° Template Profiler 15.9 x 13mm"
Price: 29.16 |
| "Trend Anglefix Mitre Guide" |
| Anglefix-Mitre-Guide-Trend-ANGLEFIX-p-The-Trend-Anglefix-Mitre-Guide-halves-the-angle-for-mitre-joints-and-is-ideal-for-mitre-cutting-of-frames-skirting-architrave-and-beading-as-well-as-basic-marking-out-p-p-It-halves-angles-to-achieve-correct-cutting-angle-before-cutting-mitres-and-sets-internal-and-external-angles-br-Can-be-used-with-hand-mitre-and-snip-off-saws-br-Patent-No-PCT-WO-00-67969-p-Trend-Anglefix-Mitre-Guide
Price: 27.64 |
| "Trend AQ21/W/25 Aqua 21 Style White 25m" |
| "AQ21/W/25 Aqua 21 Style White 25m - Trend AQ21/W/25, Aqua 63 style strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted, it is necessary to notch the seal end. Returns to original shape after compression. Stretching and shrink back at corners avoided. Suitable for all main timber Low compression force helps ease window and door operation. Maintains weathering characteristics and resists compression set over a wide temperature range +70° C to - 30° C. Research has proved that AquamacTM Weatherseal gives high levels of sound reduction. Unaffected by paint stains, window and door types.Aqua 21 style strip is a seal which is fitted into the frame rebate (head and jambs) as three cut pieces forming a compresion or wiping seal. Size. 25 metre Length. (approx)Colour. White. Trend AQ21/W/25 Aqua 21 Style White 25m"
Price: 80.03 |
| "Trend AQ63/B/25 Aqua 63 Brown 25m" |
| "AQ21/W/25 Aqua 21 Style White 25m - Trend AQ63/B/25, Aqua 63 style strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted, it is necessary to notch the seal end. Returns to original shape after compression. Stretching and shrink back at corners avoided. Suitable for all main timber Low compression force helps ease window and door operation. Maintains weathering characteristics and resists compression set over a wide temperature range +70° C to - 30° C. Research has proved that AquamacTM Weatherseal gives high levels of sound reduction. Unaffected by paint stains, window and door types.Size. 25 metre (approx length)Colour Brown. Trend AQ63/B/25 Aqua 63 Brown 25m"
Price: 51.78 |
| "Trend AQ63/W/25 Aqua 63 Style White 25m" |
| "AQ21/W/25 Aqua 21 Style White 25m - Trend AQ63/W/25, Aqua 63 style strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted, it is necessary to notch the seal end. Returns to original shape after compression. Stretching and shrink back at corners avoided. Suitable for all main timber Low compression force helps ease window and door operation. Maintains weathering characteristics and resists compression set over a wide temperature range +70° C to - 30° C. Research has proved that AquamacTM Weatherseal gives high levels of sound reduction. Unaffected by paint stains, window and door types.Aquamac 63 strip is a seal which is fitted into the frame aperture using four cut lengths and is available in either White or Brown. Size. 25 metre (approx length)Colour. White. Trend AQ63/W/25 Aqua 63 Style White 25m"
Price: 51.78 |
| "Trend 33/60X1/4 Arbor Standard Duty 33/60 x 1/4" |
| Arbor-Standard-Duty-33-60-x-1-4-Trend-33-60X1-4-p-For-use-with-Trend-bearings-and-slotters-p-p-1-4in-shank-p-p-Includes-p-p-1-x-Arbor-br-1-x-Spacer-5mm-br-3-x-Spacer-3mm-p-Trend-33-60X1-4-Arbor-Standard-Duty-33-60-x-1-4
Price: 16.66 |
| "Trend 342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm" |
| "342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm - Trend 342X1/2TC, 342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.T.C.T.1/2in Shank. Trend 342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm"
Price: 63.72 |
| "Trend 342 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm" |
| "342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm - Trend 342X1/4TC, 342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.T.C.T.1/4in Shank. Trend 342 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm"
Price: 63.72 |
| "Trend C209 x 1/4 TCT Intumescent Recessor 10 x 24mm" |
| "C209 x 1/4 TCT Intumescent Recessor 10 x 24mm - Trend C209X1/4TC, Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.Trend C209 x 1/4 TCT Intumescent Recessor to suit 4mm thick strip of 10mm width. Specification: Diameter: 24mmCutting Depth: 10mmBearing: 16mmShank: 1/4in Trend C209 x 1/4 TCT Intumescent Recessor 10 x 24mm"
Price: 31.86 |
