SpoofCard Caller ID Spoofing Calling Card
| "Trend 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm" |
| "2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm - Trend 2/01X1/4TC, These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks.Shank: 1/4in.Dimensions:Shank: 1/4inCutting Diameter (D): 1.5mmCutting Length (C): 6.0mm Trend 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm"
Price: 23.74 |
| "Trend 2/2 x 1/4 TCT Single Flute Cutter 3.2 x 8.0mm" |
| "2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm - Trend 2/2X1/4TC, These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks.Shank: 1/4in.Dimensions:Shank: 1/4inCutting Diameter (D): 3.2mmCutting Length (C): 8.0mm Trend 2/2 x 1/4 TCT Single Flute Cutter 3.2 x 8.0mm"
Price: 21.05 |
| "Trend 2/3 x 1/4 TCT Single Flute Cutter 4.0 x 11.0mm" |
| "2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm - Trend 2/3X1/4TC, These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks.Shank: 1/4in.Dimensions:Shank: 1/4inCutting Diameter (D): 4.0mmCutting Length (C): 11.0mm Trend 2/3 x 1/4 TCT Single Flute Cutter 4.0 x 11.0mm"
Price: 20.41 |
| "Trend SNAP/DBG/5 Centring Guide 5/64in Drill" |
| "SNAP/DBG/5 Centring Guide 5/64in Drill - Trend SNAP/DBG/5, These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size. 2.0 mm (5/64in).Screw Size. No.6. Trend SNAP/DBG/5 Centring Guide 5/64in Drill"
Price: 11.02 |
| "Trend SNAP/DBG/7 Centring Guide 7/64in Drill" |
| "SNAP/DBG/5 Centring Guide 5/64in Drill - Trend SNAP/DBG/7, These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size. 2.75 mm (7/64in).Screw Size. No. 8 Trend SNAP/DBG/7 Centring Guide 7/64in Drill"
Price: 11.02 |
| "Trend SNAP/DBG/9 Centring Guide 9/64in Drill" |
| "SNAP/DBG/5 Centring Guide 5/64in Drill - Trend SNAP/DBG/9, These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size.3.5 metre (9/64in).Screw Size. No.10 Trend SNAP/DBG/9 Centring Guide 9/64in Drill"
Price: 11.02 |
| "Trend SNAP/DBG/SET Drill Bit Guide Set with Quick Chuck - 5/64in 7..." |
| "SNAP/DBG/5 Centring Guide 5/64in Drill - Trend SNAP/DBG/SET, These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.This set comprises a quick chuck and three sizes of drill bit guides for accurate fitting of hinges. Contents: 1 x Quick chuck.1 x Drill bit guide 5/64in.1 x Drill bit guide 7/64in.1 x Drill bit guide 9/64in. Trend SNAP/DBG/SET Drill Bit Guide Set with Quick Chuck - 5/64in 7/64in & 9/64in"
Price: 44.62 |
| "Trend SNAP/CS/SET Countersink Set, 5 Piece" |
| "SNAP/CS/SET Countersink Set, 5 Piece - Trend SNAP/CS/SET, The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains: 1 x 2.0mm (5/64in) Drill and C/S Size No.4.1 x 2.4mm (3/32in) Drill and C/S Size No.6.1 x 2.8mm (7/64in) Drill and C/S Size. No.8.1 x 3.2mm (1/8in) Drill and C/S Size. No.10.1 x 3.6mm (9/64in) Drill and C/S Size. No.12.Fitted with High-Speed Steel drill bits to cover the full range of screw sizes and are self clearing. Trend SNAP/CS/SET Countersink Set, 5 Piece"
Price: 30.06 |
| "Trend SNAP/CSTC/SET TCT Countersink Set, 5 Piece" |
| "SNAP/CS/SET Countersink Set, 5 Piece - Trend SNAP/CSTC/SET, The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains: 1 x 2.0mm (5/64in) Drill and C/S Size No.4.1 x 2.4mm (3/32in) Drill and C/S Size No.6.1 x 2.8mm (7/64in) Drill and C/S Size. No.8.1 x 3.2mm (1/8in) Drill and C/S Size. No.10.1 x 3.6mm (9/64in) Drill and C/S Size. No.12.Tungsten carbide tipped version, these tools can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. Trend SNAP/CSTC/SET TCT Countersink Set, 5 Piece"
Price: 62.81 |
| "Trend SNAP/CS/10 Countersink with 1/8in Drill" |
| "SNAP/CS/10 Countersink with 1/8in Drill - Trend SNAP/CS/10, The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size.3.2mm. 1/8in.Countersink Size. No.10. Trend SNAP/CS/10 Countersink with 1/8in Drill"
Price: 7.54 |
| "Trend SNAP/CS/12 Countersink with 9/64in Drill" |
| "SNAP/CS/10 Countersink with 1/8in Drill - Trend SNAP/CS/12, The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size.3.6mm. (9/64in).Countersink Size. No.12. Trend SNAP/CS/12 Countersink with 9/64in Drill"
Price: 7.54 |
| "Trend SNAP/CS/4 Countersink with 5/64in Drill" |
| "SNAP/CS/10 Countersink with 1/8in Drill - Trend SNAP/CS/4, The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size. 2.0mm. (5/64in)Countersink Size. No.4. Trend SNAP/CS/4 Countersink with 5/64in Drill"
Price: 7.54 |
| "Trend SNAP/CS/6 Countersink with 3/32in Drill" |
| "SNAP/CS/10 Countersink with 1/8in Drill - Trend SNAP/CS/6, The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size: 2.4mm (3/32in).Countersink Size: No.6. Trend SNAP/CS/6 Countersink with 3/32in Drill"
Price: 7.54 |
| "Trend SNAP/CS/8 Countersink with 7/64in Drill" |
| "SNAP/CS/10 Countersink with 1/8in Drill - Trend SNAP/CS/8, The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size. 2.8 mm (7/64in)Countersink Size. No.8. Trend SNAP/CS/8 Countersink with 7/64in Drill"
Price: 7.54 |
| "Trend SNAP/D/2 Drill Adaptor 1/16in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/2, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size: 1/16 in ( with collet) Trend SNAP/D/2 Drill Adaptor 1/16in Bore"
Price: 4.72 |
| "Trend SNAP/D/3 Drill Adaptor 3/32in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/3, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size: 3/32in ( with collet) Trend SNAP/D/3 Drill Adaptor 3/32in Bore"
Price: 4.72 |
| "Trend SNAP/D/4 Drill Adaptor 1/8in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/4, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size: 1/8in ( with collet) Trend SNAP/D/4 Drill Adaptor 1/8in Bore"
Price: 4.72 |
| "Trend SNAP/D/5 Drill Adaptor 5/32in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/5, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size. 5/32in ( with collet) Trend SNAP/D/5 Drill Adaptor 5/32in Bore"
Price: 4.72 |
| "Trend SNAP/D/6 Drill Adaptor 3/16in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/6, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size: 3/16in ( with collet) Trend SNAP/D/6 Drill Adaptor 3/16in Bore"
Price: 4.85 |
| "Trend SNAP/D/7 Drill Adaptor 7/32in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/7, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size. 7/32in ( with collet) Trend SNAP/D/7 Drill Adaptor 7/32in Bore"
Price: 5.57 |
| "Trend SNAP/D/8 Drill Adaptor 1/4in Bore" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/8, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Size: 1/4 in ( with collet) Trend SNAP/D/8 Drill Adaptor 1/4in Bore"
Price: 5.57 |
| "Trend SNAP/D/SET Drill Set, 7 Piece" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/SET, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this 7 piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets. Trend SNAP/D/SET Drill Set, 7 Piece"
Price: 28.62 |
| "Trend SNAP/D/SET/2 1-7mm Drill Set, 7 Piece" |
| "SNAP/D/2 Drill Adaptor 1/16in Bore - Trend SNAP/D/SET/2, The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Content:1mm Drill2mm Drill3mm Drill4mm Drill5mm Drill6mm Drill7mm DrillWith collets. Trend SNAP/D/SET/2 1-7mm Drill Set, 7 Piece"
Price: 28.62 |
| "Trend SNAP/PC/12 Plug Cutter 1/2in" |
| "SNAP/PC/12 Plug Cutter 1/2in - Trend SNAP/PC/12, Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.For cutting 1/2 inch (12.7mm) Plugs Trend SNAP/PC/12 Plug Cutter 1/2in"
Price: 16.84 |
| "Trend SNAP/PC/38 Plug Cutter 3/8in" |
| "SNAP/PC/12 Plug Cutter 1/2in - Trend SNAP/PC/38, Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.For cutting 3/8 inch (9.5mm) Plugs. Trend SNAP/PC/38 Plug Cutter 3/8in"
Price: 13.21 |
| "Trend SNAP/CB/3TC TCT Tipped Counterbore 4.75 x 12.7mm" |
| SNAP-CB-3TC-TCT-Tipped-Counterbore-4-75-x-12-7mm-Trend-SNAP-CB-3TC-p-Counterbore-with-a-slow-spiral-drill-fitted-Tungsten-Carbide-Tipped-for-use-in-abrasive-materials-p-p-Specifications-p-p-D1-3-16-inch-br-D1-4-75-mm-br-D2-1-2-inch-br-D2-12-7-mm-br-Shank-Diameter-1-4-inch-p-Trend-SNAP-CB-3TC-TCT-Tipped-Counterbore-4-75-x-12-7mm
Price: 20.44 |
| "Trend SNAP/FLIP/SET Flip Driver Set, 4 Piece" |
| SNAP-FLIP-SET-Flip-Driver-Set-4-Piece-Trend-SNAP-FLIP-SET-p-A-four-piece-drill-countersinking-and-screwdriving-flip-over-set-p-Trend-SNAP-FLIP-SET-Flip-Driver-Set-4-Piece
Price: 16.66 |
| "Trend SNAP/HD/Set Drill Set, 7 Piece" |
| SNAP-HD-Set-Drill-Set-7-Piece-Trend-SNAP-HD-SET-p-The-HSS-drill-bits-are-gripped-by-a-spring-steel-collet-into-the-hex-shaft-The-hex-shanks-snap-into-the-quick-chuck-The-hex-collar-is-supplied-in-the-sets-to-enable-drills-to-be-removed-with-two-spanners-br-7-piece-drill-set-br-1-5-2-2-5-3-4-5-and-6mm-br-Supplied-in-a-storage-tube-p-Trend-SNAP-HD-Set-Drill-Set-7-Piece
Price: 11.02 |
| "Trend SNAP/HKLC/6 Keyless Chuck" |
| SNAP-HKLC-6-Keyless-Chuck-Trend-SNAP-HKLC-6-p-The-Trend-SNAP-HKLC-6-Keyless-Chuck-can-be-used-in-quick-chucks-and-impact-drivers-to-hold-parallel-shank-drills-bits-up-to-1-4-inch-p-p-Clamping-capacity-0-8-mm-1-32-inch-to-6-mm-1-4-inch-br-Enhanced-gripping-power-when-compared-to-traditional-key-type-drill-chucks-br-Lightweight-with-plastic-body-br-Fitted-with-Snappy-shank-1-4-inch-hex-shank-adaptor-p-p-Specification-p-p-Shank-Diameter-1-4in-hex-br-Clamping
Price: 17.51 |
| "Trend SNAP/IPZ2/10 25mm Bit Pozi No.2 (Pack 10)" |
| SNAP-IPZ2-10-25mm-Bit-Pozi-No-2-Pack-10-Trend-SNAP-IPZ2-10-p-Titanium-coated-high-grade-tool-steel-for-extra-wear-resistance-to-Cam-Out-p-p-Type-No-2-Pozi-Bits-p-p-Length-25mm-p-p-Qty-10-p-Trend-SNAP-IPZ2-10-25mm-Bit-Pozi-No-2-Pack-10-
Price: 10.27 |
| "Trend SNAP/MAG Magnetic Holder for Screws" |
| SNAP-MAG-Magnetic-Holder-for-Screws-Trend-SNAP-MAG-p-Magnetic-screwdriver-holder-p-p-Designed-to-hold-longer-screws-securely-on-to-the-screwdriver-bit-with-an-extra-magnetic-ring-Accepts-25-mm-insert-bits-and-has-an-adjustable-barrel-br-Supplied-with-one-No-2-pozi-bit-p-Trend-SNAP-MAG-Magnetic-Holder-for-Screws
Price: 11.82 |
