SpoofCard Caller ID Spoofing Calling Card
| "Trend 3/73 x 1/2 TCT Two Flute Cutter 12.0 x 50mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/73X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 50 mmD = 12 mm 15/32 in Trend 3/73 x 1/2 TCT Two Flute Cutter 12.0 x 50mm"
Price: 38.71 |
| "Trend 3/81 x 1/2 TCT Two Flute Cutter 12.7 x 32mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/81X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 32 mmD = 12.7 mm 1/2 in Trend 3/81 x 1/2 TCT Two Flute Cutter 12.7 x 32mm"
Price: 27.10 |
| "Trend 3/82 x 1/2 TCT Two Flute Cutter 12.7 x 37mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/82X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 37 mmD = 12.7 mm 1/2 in Trend 3/82 x 1/2 TCT Two Flute Cutter 12.7 x 37mm"
Price: 37.30 |
| "Trend 3/83D x 1/2 TCT Two Flute Cutter 12.7 x 50mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/83DX1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.Ideal for cutting kitchen worktops. This cutter is especially suited for drilling. C = 50 mmD = 12.7 mm 1/2 in Trend 3/83D x 1/2 TCT Two Flute Cutter 12.7 x 50mm"
Price: 37.39 |
| "Trend 3/83M x 1/2 TCT Two Flute Cutter 12.7 x 50mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/83MX1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.Shorter shank for Makita 3600B and 3612BR, Ryobi and Hitachi Routers.Ideal for cutting kitchen worktops. C = 50 mmD = 12.7 mm Trend 3/83M x 1/2 TCT Two Flute Cutter 12.7 x 50mm"
Price: 37.39 |
| "Trend 3/83 x 1/2 TCT Two Flute Cutter 12.7 x 50mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/83X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.C = 50 mmD = 12.7 mm 1/2 inD = 12.7 mm.C = 50 mm. Trend 3/83 x 1/2 TCT Two Flute Cutter 12.7 x 50mm"
Price: 34.84 |
| "Trend 3/84L x 1/2 TCT Two Flute Pocket Cutter 12.7mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/84LX1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.D = 12.7mmC = 22mmOL = 95mm Trend 3/84L x 1/2 TCT Two Flute Pocket Cutter 12.7mm"
Price: 34.57 |
| "Trend 3/85 x 1/2 TCT Two Flute Cutter 12.7 x 63mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/85X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 63 mmD = 12.7 mm 1/2 in Trend 3/85 x 1/2 TCT Two Flute Cutter 12.7 x 63mm"
Price: 46.09 |
| "Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/1X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.D = 15mmC = 25mmOL = 67mm Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm"
Price: 46.31 |
| "Trend 4/24 x 1/2 TCT Two Flute Cutter 15.9 x 63mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/24X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 63 mmD = 15.9 mm - 5/8in Trend 4/24 x 1/2 TCT Two Flute Cutter 15.9 x 63mm"
Price: 58.32 |
| "Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/29X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 25 mmD = 18 mm 45/64 in Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0 x 25mm"
Price: 40.66 |
| "Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/2X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 19 mmD = 16 mm - 5/8 in Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm"
Price: 34.57 |
| "Trend 4/30 x 1/2 TCT Two Flute Cutter 18.0 x 50mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/30X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 50 mmD = 18 mm 45/64 inOL = 92 mm Trend 4/30 x 1/2 TCT Two Flute Cutter 18.0 x 50mm"
Price: 56.89 |
| "Trend 4/50 x 1/2 TCT Two Flute Cutter 19.1 x 37mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/50X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 37 mmD = 19 mm 3/4 inOL = 79 mm Trend 4/50 x 1/2 TCT Two Flute Cutter 19.1 x 37mm"
Price: 47.50 |
| "Trend 4/5 x 1/2 TCT Two Flute Cutter 19.1 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/5X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. 1/2 in Shank.C = 25 mmD = 19.1mm 3/4in Trend 4/5 x 1/2 TCT Two Flute Cutter 19.1 x 25mm"
Price: 39.36 |
| "Trend 4/6 x 1/2 TCT Two Flute Cutter 20.0 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/6X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 20 mm 25/32 in Trend 4/6 x 1/2 TCT Two Flute Cutter 20.0 x 25mm"
Price: 44.11 |
| "Trend 4/70 x 1/2 TCT Two Flute Cutter 25.0 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/70X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 25 mm 63/64 inOL = 65 mm Trend 4/70 x 1/2 TCT Two Flute Cutter 25.0 x 25mm"
Price: 45.42 |
| "Trend 4/80 x 1/2 TCT Two Flute Cutter 25.4 x 37mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/80X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 37 mmD = 25.4 mm 1 inOL = 66 mm Trend 4/80 x 1/2 TCT Two Flute Cutter 25.4 x 37mm"
Price: 58.32 |
| "Trend 4/8 x 1/2 TCT Two Flute Cutter 25.4 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 4/8X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 25.4 mm 1in Trend 4/8 x 1/2 TCT Two Flute Cutter 25.4 x 25mm"
Price: 46.85 |
| "Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/01X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 11 mmD = 4.0 mm 5/32 Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm"
Price: 21.67 |
| "Trend 3/02 x 1/4 TCT Two Flute Cutter 6.3 x 19mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/02X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 6.3 mm 1/4in Trend 3/02 x 1/4 TCT Two Flute Cutter 6.3 x 19mm"
Price: 23.74 |
| "Trend 3/03 x 1/4 TCT Two Flute Cutter 4.5 x 11mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/03X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 4.5 mmD = 11 mm Trend 3/03 x 1/4 TCT Two Flute Cutter 4.5 x 11mm"
Price: 23.10 |
| "Trend 3/08 x 1/4 TCT Two Flute Cutter 12.7 x 25mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/08X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 12.7 mm 1/2in Trend 3/08 x 1/4 TCT Two Flute Cutter 12.7 x 25mm"
Price: 27.10 |
| "Trend 3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/10X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 11 mmD = 3.2 mm 1/8 in Trend 3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm"
Price: 21.67 |
| "Trend 3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/1X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 16 mmD = 5 mm 13/64in Trend 3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm"
Price: 25.14 |
| "Trend 3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/20X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 16 mmD = 6.3 mm 1/4 in Trend 3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm"
Price: 23.10 |
| "Trend 3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/21X1/4HSS, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.Use High Speed tooling when working with softwoods such as Pine. H.S.S Tooling1/4in Shank.C = 28 mmD = 6.3 mm 1/4 in Trend 3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm"
Price: 14.98 |
| "Trend 3/22 x 1/4 TCT Two Flute Cutter 6.3 x 25mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/22X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 6.3 mm 1/4in Trend 3/22 x 1/4 TCT Two Flute Cutter 6.3 x 25mm"
Price: 25.81 |
| "Trend 3/3 x 1/4 TCT Two Flute Cutter 7.0 x 19mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/3X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 7 mm 9/32 in Trend 3/3 x 1/4 TCT Two Flute Cutter 7.0 x 19mm"
Price: 25.81 |
| "Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/4X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 8 mm 5/16in Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm"
Price: 26.45 |
| "Trend 3/50 x 1/4 TCT Two Flute Cutter 9.5 x 25mm" |
| "3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm - Trend 3/50X1/4TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 9.5 mm 3/8in Trend 3/50 x 1/4 TCT Two Flute Cutter 9.5 x 25mm"
Price: 28.51 |
