SpoofCard Caller ID Spoofing Calling Card
| "Trend Router Pip Drilling Cutter 12mm 9mm 1/4""" |
| "For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closer pips. D: 12 m..."
Price: 27.95 |
| "Trend Cove Bearing Guided Router Cutter 28.5mm 14mm 1/4""" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D: 1 1/8 inch D: 28.5 mm C: 14 mm B: 9.5 mm B2: 12.7 mm R: 3/8 inch R: 9.5 mm OL: 52 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 28.5 ..."
Price: 51.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 10mm 25mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 25/64 inch D: 10 mm C: 25 mm OL: 58 mm Shank Di..."
Price: 15.95 |
| "Trend Ovolo Rounding Over Router Cutter 35mm 17mm 1/2""" |
| "Some Ovolo cutters can be used with radius cutters, to make rule joints. D: 35 mm C: 17 mm R: 12 mm OL: 55.1 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35 Dia Imperial: 1 3/8 Cut Length Metric: 17 Overall Length Metric..."
Price: 57.95 |
| "Trend CRAFTPRO Giuded Pierce and Trim Router Cutter 6.3mm 18mm 1/4""" |
| "Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. D: 1/4 inch D: 6.3 mm C: 45/64 inch C: 18 mm OL: 77 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 6.3 Dia Imperial: 1/4 Cut Length M..."
Price: 16.95 |
| "Trend Snappy Hex Shank HSS Drill Bit 6mm" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. D: 6 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 6..."
Price: 5.49 |
| "Trend CRAFTPRO Stair Jig Housing Dovetail Router Cutter 16mm 26mm 1/2""" |
| "Purpose made for stair housing jigs. Ensures tight fit of tread in string. D: 5/8 inch D: 16 mm C: 26 mm OL: 65 mm A: 95 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 16 Dia Imperial: 5/8 Cut Length Metric: 26 Overa..."
Price: 29.95 |
| "Trend CRAFTPRO Bearing Guided Combination Raised Bevel Router Cutter 41mm 17mm 1/2""" |
| "The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by..."
Price: 51.95 |
| "Trend Cove Bearing Guided Router Cutter 19.1mm 14.3mm 1/4""" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D: 3/4 inch D: 19.1 mm C: 14.3 mm B: 9.5 mm B2: 12.7 mm R: 3/16 inch R: 4.8 mm OL: 51 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19.1 D..."
Price: 42.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 50mm 2.5mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 50 mm Bore: M12 Kerf: 2.5 mm No. of Teeth: 4 Dia Metric: 50 Sawbore: M12 Saw Kerf Metric: 2.5 Saw Teeth: 4..."
Price: 59.95 |
| "Trend Chamfer V Groove Router Cutter 19.1mm 9.2mm 1/4""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. D: 3/4 inch D: 19.1 mm C: 9.2 mm C2: 13 mm OL: 45 mm A..."
Price: 26.95 |
| "Trend CRAFTPRO Bearing Guided Bevel Router Cutter 38.3mm 22.2mm 1/4""" |
| "Ideal for posts and newel caps for stairs. D1: 34.9 mm C: 20.6 mm B: 12.7 mm A: 60 degrees OL: 74.5 mm Shank Diameter: 1/4 inches Shank Diameter: 1/4 Dia Metric: 34.9 Cut Length Metric: 20.6 Overall Length Metric: 74.5 Bearing Dia Metr..."
Price: 32.95 |
| "Trend Bearing Guided Intumescent Recess Router Cutter 40mm 20mm 1/2""" |
| "Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip is used to create an effective barrier to both fire..."
Price: 72.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 35mm 12mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 23.95 |
| "Trend TCT Dowel Drill 201 Series Left Hand Rotation 10mm 35mm 10mm" |
| "Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting s..."
Price: 23.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 5mm 16mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 13/64 inch D: 5 mm C: 5/8 inch C: 16 mm Ol: 66..."
Price: 14.95 |
| "Trend Two Flute Aluminium Plastic HSSE Router Cutter 6.3mm 12.7mm 8mm" |
| "Straight two flute for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Ideal f..."
Price: 16.95 |
| "Trend Staff Nosing Bead Router Cutter 42.9mm 25.4mm 1/2""" |
| "Ideal for producing nosings and attractive edge moulds. D: 42.9 mm C: 25.4 mm C2: 40 mm R: 12.7 mm OL: 78 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 42.9 Cut Length Metric: 25.4 Overall Length Metric: 78 Radius 1 Metric:..."
Price: 68.95 |
| "Trend TCT Cylinder Boring Bit 203 Series Left Hand Rotation 26mm" |
| "Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat..."
Price: 52.95 |
| "Trend Router Dowel Drill 6mm 35mm 1/4""" |
| "Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. D: 6 mm C: 35 mm OL: 70 mm Shank Diameter: 1/4..."
Price: 16.95 |
| "Trend Bearing Guided Trimmer Router Cutter for Veneer 19mm 25mm 8mm" |
| "Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. Wh..."
Price: 40.95 |
| "Trend Plastic and Engraving Mini Spiral Upcut Router Cutter 1.5mm 5mm 3mm" |
| "Range of small diameter shank cutters for CNC routers. Used for specialised applications including signmaking & PRB machining. Up-cut prevents burning in plunge cuts. Two flute. D: 1.5 mm C: 5 mm OL: 38 mm Shank Diameter: 3 mm Shank Diameter..."
Price: 33.95 |
| "Trend Rotatip Two Replacable Blade Plunge Cut Router Cutter 22.2mm 19.1mm 1/2""" |
| "Plunge tools with a TC tip brazed into nose suitable for plunge cutting & the blades that can be rotated in 90 degree increments. D: 7/8 inch D: 22.2 mm C: 19.1 mm OL: 59.7 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 22.2 ..."
Price: 64.95 |
| "Trend Rotatip V Groove Engraver Router Cutter 17mm 8mm 1/2""" |
| "One blade. Blades can be rotated in 90 degree increments, giving three new edges. Specifically designed for CNC machines. D: 17 mm C: 8 mm OL: 60 mm A: 45 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 17 Cut Length Metric..."
Price: 61.95 |
| "Trend CRAFTPRO Hinge Recess 35mm Router Cutter 35mm" |
| "These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. D: 35 ..."
Price: 38.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 40mm 10mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 40 mm Bore: M12 Kerf: 10 mm No. of Teeth: 2 Dia Metric: 40 Sawbore: M12 Saw Kerf Metric: 10 Saw Teeth: 2..."
Price: 54.95 |
| "Trend Chamfer V Groove Router Cutter 9.5mm 5mm 1/2""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 9.5 mm C: 5.0 mm C2: 6.5 mm OL: 51 mm A: 45 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 9.5 Cut ..."
Price: 29.95 |
| "Trend Router Drill Counterbore 9.5mm 20mm 1/4""" |
| "This group will also drill holes and counterbore parallel holes over long periods in abrasive material. Designed to receive plug maker Ref. 24 group. The drill size is for a clearance hole only. D: 3/8 inch D: 9.5 mm D2: 4.8 mm C: 20 mm OL: 63..."
Price: 47.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 15.9mm 12.7mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/8 inch D: 15.9 mm C: 1/2 inch C: 12.7 mm OL: ..."
Price: 11.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 57.1mm 25.4mm 12mm" |
| ...
Price: 77.95 |
| "Trend Router Pip Drilling Cutter 9mm 9mm 1/4""" |
| "For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closer pips. D: 9 mm..."
Price: 25.95 |
