SpoofCard Caller ID Spoofing Calling Card
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 19mm 1/2""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 18.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 25.4mm 19.1mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 inch D: 25.4 mm C: 3/4 inch C: 19.1 mm OL: 60..."
Price: 19.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 40mm 1.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 40 mm Kerf: 1.5 mm No. of Teeth: 2 Dia Metric: 40 Sawb..."
Price: 22.95 |
| "Trend CRAFTPRO Bearing Guided Radius Panel Raiser and Back Router Cutter 88.9mm 16mm 1/2""" |
| "Panel raiser cutters for producing the panel for cabinet panelled doors. The tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.3mm. Must be used in a stationary variable speed router either mounted overhead or inverted..."
Price: 97.95 |
| "Trend Rota-Tip Two Replaceable Blade Router Cutter 19.1mm 50mm 1/2""" |
| "Used for rough cutting only & have staggered blades. Not recommended for plunge cutting unless ramped into workpiece. D: 3/4 inch D: 19.1 mm C: 50 mm OL: 107 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/..."
Price: 63.95 |
| "Trend Slotter Blade for 12MM Bore 33/1 Arbor 100mm 2.5mm 12mm" |
| "These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Requires arbor accessory. Recommended used in a fixed head router at 12,000 rpm. D: 100 mm Bor..."
Price: 63.95 |
| "Trend CRAFTPRO Intumescent Recesser Bearing Guided Router Cutter 40mm 20mm 1/2""" |
| "Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. To suit 4mm thick strip of 20mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearin..."
Price: 62.95 |
| "Trend Router Collet Reduction Sleeve 12mm 8mm" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work. D: 12 mm OL: 30 mm ..."
Price: 14.95 |
| "Trend SNAPPY WS Drill Bit 3/32"" Pack of 10" |
| "Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube. D: 3/32 inch D: 2.38 mm OL: 60 mm Dia Metric: 2.38 Dia Imperial: 3/32 Overall Length Metric: 60 Pack Qty: 10 pack..."
Price: 12.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 160mm 48T 20mm" |
| "Sawblades designed for a professional finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely t..."
Price: 16.95 |
| "Trend Three Winged Rounding Over Router Cutter Set 38mm 32mm 1/2""" |
| "Two rounded corners can be cut simultaneously. By adjusting the assembly of spacers on the arbor, timber between 10mm and 32mm thick can be moulded. Central guide bearing can be removed and fitted above or below the cutters. D: 38 mm B: 28 mm R..."
Price: 72.95 |
| "Trend 33/22X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2""" |
| "Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be fitted a..."
Price: 13.95 |
| "Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 8mm" |
| "For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is requi..."
Price: 56.95 |
| "Trend Eccentric Single Flute Router Cutter 6.3mm 10mm 1/4""" |
| "Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics than TCT. Many more re-sharpenings can be obtained fro..."
Price: 43.95 |
| "Trend HSSE Steel Sandwich Sheet Spiral Downcut Router Cutter 12.7mm 70mm 1/2""" |
| "For steel foam sandwich clad doors to facilitate a superior cut for windows & openings. For pierce and cut operations. Down-cut for superior finish. Two flute. D: 1/2 inch D: 12.7 mm C: 70 mm OL: 140 mm Shank Diameter: 1/2 inch Shank Diamet..."
Price: 99.95 |
| "Trend CRAFTPRO Bearing Guided Roman Ogee Router Cutter 4mm 15.9mm 1/4""" |
| "By raising the cutter, the top quirk is removed. D: 25 mm C: 5/8 inch C: 15.9 mm B: 9.5 mm R: 4 mm OL: 65.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Cut Length Metric: 15.9 Cut Length Imperial: 5/8 Overall Length Metric: 65.5 B..."
Price: 35.95 |
| "Trend Quad Groover Blade 47.6mm 4mm 1/2""" |
| "Replacement blade for QUADX1/2TC. D: 1 7/8 inch D: 47.6 mm E: 12.8 mm Kerf: 4 mm No. of Teeth: 2 Dia Metric: 47.6 Dia Imperial: 1 7/8 Rebate Metric: 12.8 Saw Kerf Metric: 4 Saw Teeth: 2..."
Price: 24.95 |
| "Trend Replacement Cutter Bearings Metric OD 38mm" |
| "Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. OD: 38 mm ID: 12 mm Thickness: 8 mm Cut Length Metric: 8 Bearing Dia Metric: 38 Sawbore: 12..."
Price: 11.95 |
| "Trend Eccentric Single Flute Router Cutter 4mm 11mm 1/4""" |
| "Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. ..."
Price: 17.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 190mm 24T 16mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip ..."
Price: 14.95 |
| "Trend PCD Serviceable Chipboard Router Cutter 12.7mm 25.4mm 1/2""" |
| "Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC routers..."
Price: 264.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 19.1mm 19.1mm 1/2""" |
| "Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. D: 3/4 inch D: 19.1 mm C: 3/4 inch C: 19.1 mm OL: 63.5 mm Shank Diameter: 1/2 inch ..."
Price: 23.95 |
| "Trend Low Profile Trimmer Bearing Guided Router Cutter 19.1mm 16mm 1/4""" |
| "Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. D: 3/4 inch D: 19.1 mm C: 5/8 inch C: 16 mm B: 19.1 mm A:..."
Price: 36.95 |
| "Trend Decor Bead Bearing Guided Router Cutter 25.4mm 22mm 1/2""" |
| "Decorative edge mould for shelves. Edge moulding applications only. D: 1 inch D: 25.4 mm C: 22 mm B: 16 mm R: 10.5 mm R2: 5 mm OL: 71 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 25.4 Dia Imperial: 1 Cut Length Metric..."
Price: 42.95 |
| "Trend Octacut Bearing Guided Router Cutter 44.5mm 33.4mm 1/2""" |
| "These 'Eight in One' Cutters sets have been designed to cut eight different profiles. Can be used portably or in a router table. Use B2 for a 1.6mm quirk and B3 for a round over. D: 44.5 mm C: 33.4 mm B: 9.5 mm B2: 12.7 mm B3: 16 mm R: 12.7 m..."
Price: 57.95 |
| "Trend Snappy Hex Shank HSS Drill Bit 3mm" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. D: 3 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 3..."
Price: 5.49 |
| "Trend TCT Through Drill 201 Series Left Hand Rotation 10mm 40mm 10mm" |
| "Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. ..."
Price: 32.95 |
| "Trend Stair Housing Dovetail Cutter Left Hand 16mm 26mm 1/2""" |
| "Purpose made for stair housing jigs. Ensures tight fit of tread in string. D: 5/8 inch D: 16 mm C: 26 mm A: 95 degrees OL: 68 mm Shank Diameter: 1/2 inch Rotation: Left hand Shank Diameter: 1/2 Dia Metric: 16 Dia Imperial: 5/8 Cut Lengt..."
Price: 55.95 |
| "Trend Chamfer V Groove Router Cutter 21.5mm 5.5mm 1/2""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. D: 21.5 mm C: 5.5 mm C2: 12 mm A: 30 degrees OL: 45 mm ..."
Price: 32.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 18.7mm 9.5mm 8mm" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 34.95 |
| "Trend Classic Decorative Ogee Bearing Guided Router Cutter 35mm 22mm 1/2""" |
| "Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. D: 35 mm C: 22 mm B: 9.5 mm B2: 12.7 mm R: 6.3 mm R2: 6.3 mm OL: 66 mm Shank Diameter: 1/2 inch Sha..."
Price: 50.95 |
