SpoofCard Caller ID Spoofing Calling Card
| "Irwin Glass and Tile Drill Bit 10mm" |
| "The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size 10mmDiameter: 10.0mm..."
Price: 6.49 |
| "Bosch Silver Percussion Masonry Drill Bit 6mm 400mm" |
| "The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high..."
Price: 15.95 |
| "DeWalt PCD Fibre Cement Saw Blade 216mm 8T 30mm" |
| ...
Price: 69.95 |
| "Trend Router Table Back Fence" |
| "Back fence complete for incorporation into user made router tables. Sliding cheeks to reduce cutter aperture size. With edge planing facility of 1.4mm and 2.4mm. Comes with a top featherboard pressure and a clear safety guard. Supplied with dust spou..."
Price: 89.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 4mm 11mm 1/4""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 17.5mm 25.4mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 11/16 inch D: 17.5 mm C: 1 inch C: 25.4 mm Shan..."
Price: 14.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 6mm 16mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 6 mm C: 16 mm OL: 2 7/16 inch OL: 61.5 mm Shank..."
Price: 11.95 |
| "Trend Snappy TCT Drill Countersink For Wood Screws 3mm" |
| "Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only. D: 3/8 inch D: 9.5 mm D2: 3 mm..."
Price: 15.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 18.25mm 19mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. DIMENSIONS: D1: 23/32 inches D1: 18.25 mm C: 3/4 in..."
Price: 19.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 15.9mm 12.7mm 1/4""" |
| "Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. D: 5/8 inch D: 15.9mm C: 1/2 inch C: 12.7 mm OL: 58.5 mm Shank Diameter: 1/4 inch ..."
Price: 20.95 |
| "Trend Threaded Insert for Plastics M8 Thread Pack of 50" |
| "Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. M6 inserts have slot on base and M8 inserts have slot on..."
Price: 42.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 8mm 19mm 8mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 19mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15/32 inch D: 12 mm C: 19 mm C: 3/4 inch OL: 7..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 35mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 3/8 inch D: 35 mm C: 25 mm OL: 67 mm Shank Di..."
Price: 42.95 |
| "Trend Threaded Insert for Plastics M8 Thread Pack of 10" |
| "Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. M6 inserts have slot on base and M8 inserts have slot on..."
Price: 10.95 |
| "Trend Replacement Cutter Bearings Metric OD 16mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Bosch PRO GAL 12V-40 Li-ion Battery Charger 240v" |
| ...
Price: 41.95 |
| "Bosch 3 Piece Extra Hard Torx Screwdriver Bit Set" |
| "It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are achievable thanks to the bit´s S2 Modified Steel a..."
Price: 35.95 |
| "Bosch GTA 2600 Universal Mitre Saw Stand" |
| "The perfect complement to your Bosch professional Mitre Saw, the GTA 2600 Work Stand securely supports both saw & workpiece, enabling rapid repeat cuts to be made with greater precision. Perfect for sizing long pieces of timber, the stand is fitted w..."
Price: 110.95 |
| "Draper Expert 8 Piece Tile and Glass Drill Bit Set" |
| "B>I>Expert Quality/I>/B>, for use on glass mirrors, floor tiles and quarry tiles. Contents: 3, 4, 5, 6, 7, 8, 9 and 10mm Must only be used with variable speed power drills..."
Price: 16.95 |
| "Bosch 4 Piece Flooring Oscillating Multi Tool Blade Set" |
| "The 4-piece Floor and Installation Set is a versatile kit for flooring. Each Starlock blade is individually selected for its particular performance, creating a valued set for specific floor applications. The set contains Starlock tools for floor work..."
Price: 36.95 |
| "Bosch Expert GOP Multi Tool Depth Stop" |
| "This depth stop is suitable for use with all Starlock, Starlock Plus and Starlock Max tools as well as common Bosch multi-tools. The Expert Depth Stop provides control of cutting depth when using segment saw and plunge-cutting blades. It features a c..."
Price: 11.95 |
| "Bosch 6 Piece PointTeq HSS Drill Bit Set" |
| "The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are g..."
Price: 5.49 |
| "Bosch Hex Shank Auger Drill Bit 26mm 450mm" |
| "This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The ..."
Price: 35.95 |
| "Bosch Punched Hook and Loop Sanding Sheets 93mm x 186mm 180g Pack of 10" |
| "The C470 Best for Wood and Paint has an exceptional material removal rate. The product has a calcium stearate coating that reduces clogging. Furthermore, its electrostatic open-coated surface with space between grits ensures even, controlled, consist..."
Price: 7.49 |
| "Bosch Optiline Wood Cutting Saw Blade 235mm 24T 30mm" |
| "The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accura..."
Price: 16.95 |
| "Bosch Extra Hard Phillips Screwdriver Bits PH2 89mm Pack of 3" |
| "It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are achievable thanks to the bit´s S2 Modified Steel a..."
Price: 15.95 |
| "Bosch Red Wood Top Sanding Disc 150mm 150mm 80g Pack of 50" |
| "The C470 Best for Wood and Paint has an exceptional material removal rate. The product has a calcium stearate coating that reduces clogging. Furthermore, its electrostatic open-coated surface with space between grits ensures even, controlled, consist..."
Price: 30.95 |
| "Trend Slow Spiral HSS Twist Drill 1/8""" |
| "Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. D: 1/8 inch D: 3.2 mm OL: 65 mm Shank D..."
Price: 4.95 |
| "Draper Torx Screwdriver Bits T20 25mm Pack of 2" |
| "Chrome vanadium steel hardened, tempered with shot blast finish. Supplied in 1 or 2's. Draper TX-STAR® products are compatible with †Torx fixing systems †Torx is the registered trademark of Acument Intellectual Properties LLC. ..."
Price: 0.95 |
| "Bosch HSS PointTeQ Drill Bit 1mm Pack of 10" |
| "The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are g..."
Price: 4.95 |
