SpoofCard Caller ID Spoofing Calling Card
| "Trend STC Spiral Upcut Router Cutter 12.7mm 50mm 1/2""" |
| "Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plu..."
Price: 146.95 |
| "Trend Bearing Guided Decorative Bead Router Cutter 35mm 38mm 1/2""" |
| "For architraves, framing as well as edge moulding. D: 35 mm D2: 22 mm C: 38 mm B: 16 mm R: 7 mm R2: 5 mm OL: 87 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35 Dia Imperial: 1 3/8 Dia2 Metric: 22 Cut Length Metric: 38 ..."
Price: 72.95 |
| "Trend TRADE RANGE Radius Router Cutter 10mm 1/4""" |
| "For edge coves and fluting. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood..."
Price: 22.95 |
| "Trend Caravan Ind Guided Pierce and Trim Single Fliute Router Cutter 9.5mm 25mm 3/8""" |
| "Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. D: 3/8 inch D: 9.5 mm C: 25 mm OL: 63.5 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Metric: 9.5 ..."
Price: 25.95 |
| "Trend Rotatip Trimmer Bearing Guided Router Cutter 19mm 30mm 1/4""" |
| "Blades of cutters can be rotated through 180 degrees to give one new cutting edge. D: 19 mm C: 30 mm B: 19 mm A: 90 degrees OL: 70 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19 Cut Length Metric: 30 Overall Length Metric..."
Price: 70.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 12.7mm 63mm 12mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 26.95 |
| "Trend Quad Groover Blade 47.6mm 2.38mm 1/2""" |
| "Replacement groover for QUADX1/2TC. D: 1 7/8 inch D: 47.6 mm E: 12.8 mm Kerf: 2.4 mm No. of Teeth: 2 Dia Metric: 47.6 Dia Imperial: 1 7/8 Rebate Metric: 12.8 Saw Kerf Metric: 2.4 Saw Teeth: 2..."
Price: 17.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 150mm 24T 20mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spind..."
Price: 12.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 40mm 2.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 40 mm Kerf: 2.5 mm No. of Teeth: 2 Dia Metric: 40 Sawb..."
Price: 22.95 |
| "Trend Double Bearing Guided Trimmer Routing Cutter 19.1mm 25.4mm 12mm" |
| "Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more easily, by turning component other way up. D: 3/4 ..."
Price: 50.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 9.5mm 31.8mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 3/8 inch D: 9.5 mm C: 1 1/4 inch C: 31.8 mm OL:..."
Price: 13.95 |
| "Trend CRAFTPRO Bearing Guided Combination Raised Bevel Router Cutter 41mm 17mm 8mm" |
| "The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by..."
Price: 51.95 |
| "Trend Snappy TCT Drill Countersinks Size 6" |
| "Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only. D: 3/8 inch D: 9.5 mm D2: 3/32..."
Price: 13.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 25.4mm 13mm 8mm" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 44.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.9mm 25.4mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/16 inch D: 7.9 mm C: 1 inch C: 25.4 mm Ol: 71..."
Price: 11.95 |
| "Trend PCD Disposable MDF Router Cutter 15.9mm 25.4mm 1/2""" |
| "Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC routers..."
Price: 205.95 |
| "Trend Lip and Spur Two Wing Machine Bit 22mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 50.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 50mm 8mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 50 mm Bore: M12 Kerf: 8 mm No. of Teeth: 4 Dia Metric: 50 Sawbore: M12 Saw Kerf Metric: 8 Saw Teeth: 4..."
Price: 62.95 |
| "Trend PCD Serviceable MDF Router Cutter 15.9mm 25.4mm 1/2""" |
| "Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC routers..."
Price: 293.95 |
| "Trend Large Bearing Guided Ogee Panel Raiser Router Cutter 85.7mm 15.9mm 1/2""" |
| "Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match ou..."
Price: 81.95 |
| "Trend Bearing Guided Trimmer Router Cutter 12.7mm 50mm 1/2""" |
| "Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A maximum of 3mm overlap should be left before copy profiling. When..."
Price: 66.95 |
| "Trend TCT Grooving Cutter 125mm 5mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 104.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 19.1mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15/32 inch D: 12 mm C: 3/4 inch C: 19.1 mm OL: ..."
Price: 13.95 |
| "Trend Roman Ogee Bowl Bearing Guided No Lip Router Cutter 54mm 25mm 1/2""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For finishing undermount bowl. Without lip. D: 54 mm C: 25 mm B: 21.8 mm A: 75 degrees R: 12.7 mm OL: 79 mm Shank..."
Price: 81.95 |
| "Trend Oversize Template Bearing Guided Router Cutter 12.7mm 9.5mm 1/4""" |
| "Oversize profiler allows component to be routed oversize to template. Useful when making jigs, templates and patterns. Can be used for trenching operations in shallow passes. For use with the Porter Cable Strike & Latch and Door Hinge templates. Down..."
Price: 21.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 12mm 19mm 8mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 20.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 31.8mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 1/4 inch D: 31.8 mm C: 25 mm OL: 2 1/2 inch O..."
Price: 40.95 |
| "Trend Bearing Guided Trimmer Router Cutter 12.7mm 25mm 8mm" |
| "For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a ..."
Price: 23.95 |
| "Trend Snappy Hex Shank HSS Drill Bit 1/16""" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. D: 1/16 inch D: 1.6 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 1.6 Dia Imperial: 1/16..."
Price: 5.49 |
| "Trend Router Plug Maker 12mm 16mm 1/4""" |
| "These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. D: 12 mm C: 16 mm OL: 55 mm Shank Diameter: 1/4 inch Body: 19 mm Shank Diameter: 1/4 Dia M..."
Price: 44.95 |
| "Trend Bearing Guided Trimmer Router Cutter for Veneer 19.1mm 25.4mm 1/2""" |
| "Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. Wh..."
Price: 42.95 |
