SpoofCard Caller ID Spoofing Calling Card
| "Trend CRAFTPRO Radius Router Cutter 6.3mm 12.7mm 1/4""" |
| "These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. D: 1/4 inch D: 6.3 mm C: 1/2 inch C: 12.7 mm OL: 65 mm R: 3.2 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric:..."
Price: 15.95 |
| "Trend TCT Cylinder Boring Bit 203 Series 40mm" |
| "Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat..."
Price: 79.95 |
| "Trend Classic Decorative Ogee Bearing Guided Router Cutter 35mm 22mm 1/2""" |
| "Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. D: 35 mm C: 22 mm B: 9.5 mm B2: 12.7 mm R: 6.3 mm R2: 6.3 mm OL: 66 mm Shank Diameter: 1/2 inch Sha..."
Price: 50.95 |
| "Trend STC Spiral Upcut Plastic Router Cutter 6.35MM 19mm 1/4""" |
| "Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards, solid surface material and foam boards. Single O flute design for fast cutting. Increased feed rates allowing for mo..."
Price: 62.95 |
| "Trend Slow Spiral HSS Twist Drill 5/16""" |
| "Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. D: 5/16 inch D: 7.9 mm OL: 117 mm Shank..."
Price: 13.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 32mm 16mm 8mm" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 46.95 |
| "Trend Mortise Router Cutter 12.7mm 50mm 1/2""" |
| "TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. D: 1/2 inch D: 12.7 mm C: 50 mm OL: 108 mm Shank Diamet..."
Price: 51.95 |
| "Trend Leigh Dovetail Jig Straight Router Cutter 31.5mm 76mm 1/2""" |
| "For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. D: 11 mm C: 31.5 mm OL: 76 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 11 Cut Length Metric: 31.5 Overall Length Metric: 76..."
Price: 21.95 |
| "Trend Snappy Magnetic Holder Screw Bit Holder" |
| "Designed to hold longer screws securely onto the screwdriver bit with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel. D: 14 mm OL: 62 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 14 Ove..."
Price: 12.95 |
| "Trend Complete Flat Lying Trammel Set" |
| "The only flat lying compass in the world. Self supporting, giving more stability and control, reducing margin for error. Solves the problem found with traditional compasses and trammels which have high centre of gravity, and are therefore unstable an..."
Price: 30.95 |
| "Trend Snappy 3 Piece Drill Bit Guide Set" |
| "Set comprising a Quick Chuck and three sizes of Drill Bit Guides for the accurate fitting of hinges. Drill bit guides for No.6, No.8 and No.10 screws. Self-centring drills for the accurate drilling of pilot holes for fittings such as hinges to ensure..."
Price: 43.95 |
| "Trend Two Flute Worktop Jig Router Cutter 12.7mm 108mm 1/2""" |
| "TCT extra long cutter. Two flutes give a clean finish to cut edges. Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base. D: 1/2 inch D: 12.7 mm C: 50 mm OL: ..."
Price: 30.95 |
| "Trend Snappy Forstner Drill Bit 25mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 21.95 |
| "Trend Professional Wood Cutting Saw Blade 215mm 48T 30mm" |
| "For cross cutting applications. These blades have a zero hook angle to minimise 'pick-up' and 'snatching'. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed..."
Price: 75.95 |
| "Trend Bradawl For Hinge Jig Short Blade" |
| "Replacement bradawl only for the H/JIG/C. Short blade. Blade length: 45 mm Restriction: Not to be sold to persons underage ..."
Price: 6.95 |
| "Trend Professional Wood Cutting Saw Blade 160mm 24T 16mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 42.95 |
| "Trend CraftPro Bearing Guided Round Over and Ovolo Router Cutter 24.7mm 12MM 1/4""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by ..."
Price: 27.95 |
| "Trend Snappy Tin Coated Pozi Screwdriver Bits PZ1 25mm Pack of 10" |
| "A pack of 25mm Pozi insert bits. Forged bit for strength and longer life. They have a round shaft to reduce breakage giving excellent torque transmission and extended life time. Suit all types of screw applications in trade and industry. For use with..."
Price: 10.95 |
| "Trend Professional Aluminium and Plastic Cutting Saw Blade 300mm 96T 30mm" |
| "For non-ferrous metals or plastics. These blades have a negative hook angle. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Mi..."
Price: 138.95 |
| "Trend Snappy Drill Countersink Suitable Plug Cutter Size 10" |
| "Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only. D: 1/2 inch D: 12.7 mm D2: 1/8 inch D2: 3.25 mm Shank Diameter..."
Price: 7.95 |
| "Trend Professional Panel Trimming Saw Blade 300mm 96T 30mm" |
| "For fine super trimming of panels. These blades have a triple chip tooth design with a triple chip tooth design with a positive hook for super fine finish. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered an..."
Price: 122.95 |
| "Trend HSS Two Flute Straight Router Cutter 6.3mm 16mm 1/4""" |
| "These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC ..."
Price: 11.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 25.4mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Etched with metric scale on body to aid depth setting. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. ..."
Price: 15.95 |
| "Trend Professional Wood Cutting Saw Blade 235mm 40T 30mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 70.95 |
| "Trend Snappy Wood Auger Bit 13mm" |
| "Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. D: 13 mm OL: 155 mm Shank Diameter: 1/4 inch hex S..."
Price: 10.95 |
| "Trend Non Slip Mat Adhesive Backed" |
| "Non slip mat for jig making. Self adhesive backed sheet. Size 300mm x 300mm. Can be cut to size to suit application. Can be used to refurbish pushblocks or lining the drawers of workshop tool chests etc. 300mm (12"") x 300mm (12"")..."
Price: 8.95 |
| "Trend Hand Mitre Shear Trapezoidal Blade" |
| "With 45 degree angled angled wings. For perfect mitre cuts of mouldings, beadings and weatherseals. Can be used to cut mouldings at 90 degrees up to 7.5mm thick. For battens at 45 degrees the maximum thickness is 7.5mm and 35mm wide. Left and right h..."
Price: 65.95 |
| "Trend CRAFTPRO Non Stick Wood Cutting Saw Blade 190mm 40T 30mm" |
| "Non-stick PTFE coat to prevent resin build up and increase sawblade life. Sawblades designed for a professional finish in soft wood, hard wood, particle board, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip..."
Price: 17.95 |
| "Trend Snappy Tin Coated Pozi Screwdriver Bits and Holder" |
| "Set comprises ten No.2 Pozi bits & quick change bit holder. For No.6, 8 & 10 screws. Round shaft bits to reduce breakage giving excellent torque transmission & extended life. Supplied in reusable storage case. OL: 25 mm Size: No.2 Pozi Shank Dia..."
Price: 12.95 |
| "Trend Snappy TCT Counterbore Drill Bit 4mm 9.5mm" |
| "Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. D: 3/8 inch D: 9.5 mm D2: 5/32 inch D2: 4 mm C: 8 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 4 Dia Imperial: 5/3..."
Price: 20.95 |
| "Trend Professional Aluminium and Plastic Cutting Saw Blade 235mm 60T 30mm" |
| "For non-ferrous metals or plastics. These blades have a negative hook angle. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Mi..."
Price: 99.95 |
