SpoofCard Caller ID Spoofing Calling Card
| "Trend Rota-Tip Two Replaceable Blade Router Cutter 16mm 50mm 1/2""" |
| "Blades can be rotated 180 degrees to give double the life of a conventional tool. Not recommended for plunge cutting unless ramped into workpiece. Used for rough cutting only & have staggered blades. D: 5/8 inch D: 15.9 mm C: 50 mm OL: 107 mm ..."
Price: 71.95 |
| "Trend Snappy Flat Bit 30mm 150mm" |
| "An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. D: 30 mm OL: 152 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 30 Overall Length Metric: 152..."
Price: 6.49 |
| "Trend TCT Grooving Cutter 125mm 4mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 101.95 |
| "Trend Bearing Guided Inlay Trimming Router Cutter 19mm 25mm 1/2""" |
| "Self guided tools for trimming inlay or overlaps. D: 19 mm C: 25 mm B: 19 mm A: 90 degrees OL: 83 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19 Cut Length Metric: 25 Overall Length Metric: 83 Bearing Dia Metric: 19..."
Price: 28.95 |
| "Trend Replacement Bearing 16mm 4.9mm 5mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend Alucobond V Groove Router Cutter 13mm 10mm 1/4""" |
| "Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core. The v groove cutters rout into the cover and part of the core to allow folding of material by hand..."
Price: 38.95 |
| "Trend WS Saw Tooth Forstner Drill Bit 1"" 1/4"" 1/2""" |
| "Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll a..."
Price: 37.95 |
| "Trend Snappy Long Series Phillips Screwdriver Bit PH1 150mm Pack of 1" |
| "Extra long Phillips screwdriver bits For use with Trend Snappy Quick Chuck. OL: 150 mm Size: Phillips No.1 Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 150 Type or Grade: PH1 Pack Qty: 1 pack..."
Price: 8.95 |
| "Trend CRAFTPRO TCT Hinge Sinking Bit 30mm 8mm" |
| "These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This economy range is supplied without scribers and are used for recessing holes in melamine covered chipboard. Use with pillar drills only. D:..."
Price: 12.95 |
| "Trend Radius Router Cutter 19.1mm 31.7mm 1/2""" |
| "For coves and part of a rule joint. D: 19.1 mm C: 31.7 mm R: 3/8 inch R: 9.5 mm OL: 71 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: 31.7 Overall Length Metric: 71 Radius 1 Metri..."
Price: 61.95 |
| "Trend Professional Two Flute Straight Router Cutter 5mm 16mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 13/64 inch D: 5 mm C: 16 mm OL: 64.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 5 D..."
Price: 22.95 |
| "Trend STC Mini Engraver Half Conical Radus Wood and Plastics 3.5mm 15mm 4mm" |
| "Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Single flute flat style. DIMENSIONS: D1: 3.5 mm C: 15 mm R1: 0.5 mm A: 5.5 degrees OL: 50 mm Shank Diameter: 4 mm For material: Wood Preset Tool Code:..."
Price: 27.95 |
| "Trend HSS Spiral Up Cut Router Cutter 8mm 19mm 1/4""" |
| "Ideal for softwoods where a fine finish is required, the upcut prevents burning in plunge cuts. Up-cut spiral tools will give a fine finish and have long shanks. Also suitable for non-ferous metals and are designed to plunge and machine or mill later..."
Price: 34.95 |
| "Trend Arbor For 12Mm Bore Groover Blades 3/8""" |
| "Heavy duty arbor with spacers for 12mm bore slotters with or without bearings. OL: 84.5 mm Spigot dia.: 12 mm Spigot length incl thread: 45 mm Spigot thread length: 20 mm Diameter: 18.5 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Me..."
Price: 28.95 |
| "Trend Rotatip V Groove Engraver Router Cutter 17mm 8mm 1/4""" |
| "One blade. Blades can be rotated in 90 degree increments, giving three new edges. D: 17 mm C: 8 mm OL: 49.5 mm A: 45 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 17 Cut Length Metric: 8 Overall Length Metric: 49.5 ..."
Price: 50.95 |
| "Trend Cove Bearing Guided Router Cutter 19.1mm 14.3mm 1/2""" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D: 3/4 inch D: 19.1 mm C: 14.3 mm B: 9.5 mm B2: 12.7 mm R: 3/16 inch R: 4.8 mm OL: 60.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19...."
Price: 41.95 |
| "Trend Bearing Guided Double Trim Router Cutter 18mm 15mm 1/4""" |
| "Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. D: 18 mm C: 15 mm C2: 9 mm A: 90 degrees OL: 65 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 18 Cut Leng..."
Price: 57.95 |
| "Trend Bearing Guided Trimmer Router Cutter 9.5mm 25.4mm 1/4""" |
| "For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a ..."
Price: 23.95 |
| "Trend Bearing Guided Trimmer Router Cutter 12.7mm 25.4mm 1/2""" |
| "For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a ..."
Price: 23.95 |
| "Trend TCT Grooving Cutter 150mm 12mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 147.95 |
| "Trend Snappy Square Robertson Screwdriver Bits R1 Square 50mm Pack of 3" |
| "Square Robertson screwdriver bits. D: 3/32 inch D: 2.38 mm OL: 50 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 2.38 Dia Imperial: 3/32 Overall Length Metric: 50 Type or Grade: R1 Pack Qty: 3 pack..."
Price: 5.49 |
| "Trend Lip and Spur Two Wing Machine Bit 35mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 55.95 |
| "Trend RBT/4 Routabout Jig For 22mm Floors" |
| "Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 22mm chipboard or similar floors. Cuts only the thi..."
Price: 77.95 |
| "Trend TCT Dowel Drill 201 Series Left Hand Rotation 10mm 27mm 10mm" |
| "Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting s..."
Price: 20.95 |
| "Trend CRAFTPRO Nail Cutting Saw Blade 184mm 30T 30mm" |
| "Teeth have top and front bevel which allows the blade to cut more easily through the timber. Sawblades designed for a professional finish in soft wood & hard wood. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded secu..."
Price: 14.95 |
| "Trend Bearing Guided Classic Ovolo Mould Router Cutter 38mm 14mm 1/2""" |
| "Edge moulds for plinths and plaques. D: 38 mm C: 14 mm B: 12.7 mm R: 3 mm R2: 8 mm OL: 65 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 38 Cut Length Metric: 14 Overall Length Metric: 65 Bearing Dia Metric: 12.7 Bearing..."
Price: 60.95 |
| "Trend Bearing Guided Ogee Router Cutter 28.5mm 12.7mm 1/4""" |
| "Supplied with two bearings. The larger bearing removes the bottom quirk. D: 28.5 mm C: 1/2 inch C: 12.7 mm B: 9.5 mm B2: 12.7 mm R: 4.5 mm R2: 4 mm OL: 52.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 28.5 Cut Length M..."
Price: 50.95 |
| "Trend Arbor For 12Mm Bore Groover Blades 1/2""" |
| "Heavy duty arbor with spacers for 12mm bore slotters with or without bearings. OL: 84.5 mm Spigot dia.: 12 mm Spigot length incl thread: 45 mm Spigot thread length: 20 mm Diameter: 18.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Me..."
Price: 23.95 |
| "Trend Professional Two Flute Straight Router Cutter 19mm 25mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 3/4 inch D: 19.1 mm C: 25 mm OL: 67 mm Shank Diameter: 1/2 inch Shank Diam..."
Price: 34.95 |
| "Trend Glazing Sash Bar Ovolo Joint Router Cutter 22mm 18mm 1/4""" |
| "Designed for sash bar window construction. D: 22 mm C: 18 mm R: 10 mm OL: 46.6 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 22 Cut Length Metric: 18 Overall Length Metric: 46.6 Radius 1 Metric: 10..."
Price: 50.95 |
| "Trend Bearing Guided Housing Router Cutter 19.1mm 11.1mm 1/4""" |
| "Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. D: 3/4 inch D: 19.1 mm C: 11.1 mm B: 19.1 mm OL: 57 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19.1 Dia Im..."
Price: 39.95 |
