SpoofCard Caller ID Spoofing Calling Card
| "Trend Classic Panel Bearing Guided Router Cutter 22mm 12.7mm 1/4""" |
| "Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. D: 22 mm C: 1/2 inch C: 12.7 mm B: 22 mm R: 4 mm R2: 5.5 mm OL: 52 mm Shank Diameter: 1/4 inch Sh..."
Price: 51.95 |
| "Trend Chamfer V Groove Router Cutter 25.4mm 13mm 1/4""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 25.4 mm C: 13 mm C2: 17.5 mm A: 45 degrees OL: 48 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 25.4 Dia..."
Price: 51.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 12.7mm 38mm 1/2""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 24.95 |
| "Trend Radius Bearing Guided Router Cutter 15.9mm 11mm 1/4""" |
| "Template thickness should be 5mm thicker than cut length of cutter. D: 15.9 mm C: 11 mm OL: 55 mm B: 16 mm R: 5/16 inch R: 7.9 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 15.9 Dia Imperial: 5/8 Cut Length Metric: 11 Ov..."
Price: 41.95 |
| "Trend Professional Two Flute Straight Router Cutter 44.5mm 32mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 1 3/4 inch D: 44.5 mm C: 32 mm OL: 73 mm Shank Diameter: 1/2 inch Shank Di..."
Price: 63.95 |
| "Trend TCT Through Drill 201 Series 10mm 25mm 10mm" |
| "Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. ..."
Price: 26.95 |
| "Trend Professional Wood Cutting Saw Blade 190mm 24T 30mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 47.95 |
| "Trend Chamfer Router Cutter 29mm 11mm 1/2""" |
| "For bevelling and panelling applications. D: 29 mm D2: 10 mm C: 11 mm A: 30 degrees OL: 69 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 29 Dia2 Metric: 10 Cut Length Metric: 11 Overall Length Metric: 69 Angle: 30..."
Price: 41.95 |
| "Trend Professional Two Flute Straight Router Cutter 7mm 19mm 8mm" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 9/32 inch D: 7 mm C: 19 mm OL: 56 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 7 Dia Imp..."
Price: 22.95 |
| "Trend Dovetail Cutter for DC400 Jig 11.3mm 19mm 1/4""" |
| "Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks. D: 11.3 mm C: 19 mm A: 97 degrees OL: 68 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 11.3 Cut Length Metric: 19 Overall Length Metri..."
Price: 19.95 |
| "Trend Router Guide Bush 33.3mm" |
| "Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 33.3 mm Outsi..."
Price: 11.95 |
| "Trend T10EK 1/2 Plunge Router 240v" |
| "Ideal for use by the tradesman in the workshop or on site. Extend the versatility of the T10 router with an extensive range of compatible accessories and jigs. For the full list, a href=""https://www.trend-uk.com/en/UK/trend/content/content_detail.ph..."
Price: 415.95 |
| "Trend Eccentric Single Flute Router Cutter 1mm 3mm 1/4""" |
| "Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pa..."
Price: 17.95 |
| "Trend WS Saw Tooth Forstner Drill Bit 3/4"" 1/2""" |
| "Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll a..."
Price: 22.95 |
| "Trend 33/21X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2""" |
| "Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be fitted a..."
Price: 13.95 |
| "Trend Linenfold Panel Mould Router Cutter 25mm 44mm 1/2""" |
| "Two flute tungsten carbide tipped router cutter for linen fold effect on panels. Allows mock linen fold panels to be produced. Linen fold is a traditional effect used on furniture and panelling. For the scroll effect a shank mounted bearing guided 4m..."
Price: 70.95 |
| "Trend Routaseal Silicon Sealing Strip White 10m" |
| "High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C. Recessed using a small 1/4"" hand router. Can be slid or tucked in from the top face. Compresses to approx. 3.5mm. Groove depth should be 3mm.. Length: ..."
Price: 40.95 |
| "Trend Bearing Guided Undermount Bowl Bevel Router Cutter 32mm 25mm 12mm" |
| "Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Designed to trim surface to an undermount bowl. D: 32 mm C: 25 mm B: 21.8 mm A: 78 degrees OL: 80 mm S..."
Price: 70.95 |
| "Trend RBT/1 Routabout Jig for 18mm Floors" |
| "Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 18mm chipboard or similar floors. Cuts only the thi..."
Price: 72.95 |
| "Trend Snappy Metric Tap 5mm" |
| "For use in torque control screwdrivers on metals and plastics. Shank Diameter: 1/4 inch hex Tap size: M5 x 0.8 Shank Diameter: 1/4 hex Dia Metric: M5 Type or Grade: for M5..."
Price: 16.95 |
| "Trend STC Engraver Router Cutter 3mm 3mm 3mm" |
| "Solid Carbide for long life. Ideal for engraving and veining work. D: 3 mm C: 3 mm OL: 39 mm A: 45 degrees Shank Diameter: 3 mm Shank Diameter: 3mm Dia Metric: 3 Cut Length Metric: 3 Overall Length Metric: 39 Angle: 45..."
Price: 31.95 |
| "Trend Professional Two Flute Straight Router Cutter 8mm 26mm 8mm" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 5/16 inch D: 8 mm C: 25 mm OL: 70 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 8 Dia Imp..."
Price: 23.95 |
| "Trend Replacement Bearing 17mm 7/32"" 1/4""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend RTS/1000 Router T Square" |
| "A large 1 metre long bladed T-square for use with a router. Blade has two parallel edges to allow a router to run on both edges. Allows a router to rout an edge square. The butt has two M5 tapped holes for fitting of a false fence. Ideal for grooving..."
Price: 79.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 184mm 30T 16mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spind..."
Price: 15.95 |
| "Trend CRAFTPRO Wood Cutting Mitre Saw Blade 216mm 60T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ens..."
Price: 20.95 |
| "Trend Professional Router Table Aluminium Mitre Fence" |
| "For use with user made router tables, saw benches and band saws. Heavy duty with adjustable stops at -45 degree, 90 degree and +45 degree. Scale pitch of 5 degree. Protractor body 142mm x 48mm high with metal bar 300mm x 17mm. Spring loaded locator f..."
Price: 36.95 |
| "Trend Trendicote PTFE Spray 500ml" |
| "Dry lubricant spray to increase sawblade and router cutter life. Invaluable for preventing build-up of resins on metal table surfaces, sawblades and metal tooling. Does not contain silicone. Not for use on router plunge columns. **UK mainland only..."
Price: 24.95 |
| "Trend Snappy Screwdriver Bit Holder 280mm" |
| "Extra long magnetic holder for 25mm insert bits. Quick and easy to use and saves time when trying to remove awkward and hard to reach screws. D: 9.4 mm For hex bits: 1/4-inch OL: 11 inch OL: 279 mm Shank Diameter: 1/4 inch hex Shank Diamete..."
Price: 17.95 |
| "Trend Snappy Flat Bit 22mm 150mm" |
| "An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. D: 22 mm OL: 152 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 22 Overall Length Metric: 152..."
Price: 5.49 |
| "Trend Snappy High Performance Impact Screwdriver Bits PZ2 49mm Pack of 3" |
| "A pack of 49mm No. 2 Pozi screwdriver bits for use in impact drivers. They have a round shaft to reduce breakage giving excellent torque transmission (can twist 20 degree) and extended life time. Cellulose acetate sleeve retains broken tip if it shat..."
Price: 11.95 |
