| "Bahco Flat Drill Bit 28mm 171mm" |
| "The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre sec..."
Price: 9.95 |
| "Bahco Flat Drill Bit 32mm 171mm" |
| "The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre sec..."
Price: 9.95 |
| "Bahco Flat Drill Bit 35mm 171mm" |
| "The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre sec..."
Price: 10.95 |
| "Bahco Flat Drill Bit 38mm 171mm" |
| "The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre sec..."
Price: 11.95 |
| "Bahco Flat Drill Bit 6mm 156mm" |
| "The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre sec..."
Price: 5.49 |
| "Bahco Flat Drill Bit 8mm 156mm" |
| "The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre sec..."
Price: 5.49 |
| "Bahco Flat Drill Bit 13mm 400mm" |
| "The Bahco Long Flat Bit is a top quality flat bit with an extended shaft, useful for reaching awkward spots or for drilling accurate, deep holes into wood.Size: 13mm...."
Price: 6.99 |
| "Bahco Flat Drill Bit 22mm 400mm" |
| "The Bahco Long Flat Bit is a top quality flat bit with an extended shaft, useful for reaching awkward spots or for drilling accurate, deep holes into wood.Size: 22mm...."
Price: 10.95 |
| "Bahco Flat Drill Bit 30mm 400mm" |
| "The Bahco Long Flat Bit is a top quality flat bit with an extended shaft, useful for reaching awkward spots or for drilling accurate, deep holes into wood.Size: 30mm...."
Price: 15.95 |
| "Draper 19mm Shank Mortice Chisel 1""" |
| "Manufactured from high carbon steel hardened and tempered, finely ground, polished with honed cutting edges. Mortice Square: 1"" Chisel Bit Diameter: 19mm..."
Price: 39.95 |
| "Dremel SC544 EZ SpeedClic 38mm Wood Cutting Wheel 38mm Pack of 1" |
| "Cut faster through wood. With this ø 38 mm EZ SpeedClic wood cutting wheel 544 you can cut both hard and soft types of wood and also laminate. The carbide coating makes this wheel very durable. Quick, Easy, Keyless.Specifications:r..."
Price: 16.95 |
| "Draper Expert AP1500K Angle Polisher 180mm 240v" |
| "• B>I>Expert Quality/I>/B>• Soft start• Stepped speed adjuster (100r/min per step)• Digital speed display• ..."
Price: 146.95 |
| "Bosch GWS 24-230 LVI Angle Grinder 230mm 110v" |
| "GWS 24-230 LVI angle grinders are powerful tools from Bosch for working on metal, and are suitable for cutting, grinding, roughing and rust removal on different materials. Vibration Control ensures 50% less vibration, therefore protecting your health..."
Price: 276.95 |
| "Steinel Reduction Nozzle for HL Models and HG 2120 E, 2320 E and 2220 E 14mm" |
| "Reduction nozzles deliver a concentrated flow of hot air, making them ideal for use where extra precision is required. Suitable for: • HL Models • HG 2120 E • HG 2320 E • HG 2220 E • HG 2000 E • HG 2300 E • ..."
Price: 6.49 |
| "Dremel 569 Grout Removal Bit 1.6mm Pack of 1" |
| "Ideal for cleaning wall and floor grout or removing grout to replace broken tiles. Use with the Dremel Grout Removal attachment 568.Specifications:Shank diameter: 3,2 mm Working diameter: 1,6 mmMaximum RPM: 20.000 1/mi..."
Price: 11.95 |
| "Dremel 570 Grout Removal Bit 3.2mm Pack of 1" |
| "Ideal for cleaning wall and floor grout or removing grout to replace broken tiles. Use with the Dremel Grout Removal attachment 568.Specifications:Shank diameter: 3,2 mm Working diameter: 3,2 mmMaximum RPM: 20.000 1/mi..."
Price: 12.95 |
| "Draper Brassed Wire Wheel Brush 75mm 6mm Shank" |
| "Brassed crimped steel wire with 6mm diameter shank. Diameter: 75mm..."
Price: 3.95 |
| "Draper Punched Hook and Loop Sanding Sheets 90mm x 187mm 60g Pack of 10" |
| "Hole punched with hook and loop fixing. Assorted pack comprises 3 x 60, 4 x 80 and 3 x 120 grit grades.Packed ten sheets per pack. Grade: 60..."
Price: 2.49 |
| "Draper Punched Hook and Loop Sanding Sheets 90mm x 187mm 120g Pack of 10" |
| "Hole punched with hook and loop fixing. Assorted pack comprises 3 x 60, 4 x 80 and 3 x 120 grit grades.Packed ten sheets per pack. Grade: 120..."
Price: 2.49 |
| "Wera Torsion Stainless Steel Torx Screwdriver Bit T8 25mm Pack of 1" |
| "High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in..."
Price: 2.95 |
| "Steinel Cutting Nozzle for Heat Guns" |
| "This Cutting nozzle must be used in conjunction with Steinel's 9mm reduction nozzle (070618) which it fits onto the end of. The cutting nozzle delivers a fine, concentrated blast of hot air which can be used for cutting through hard foam. Suitabl..."
Price: 6.95 |
| "Faithfull Aluminum Oxide Cloth Belt 100mmx 620mm 100mm x 620mm 40g Pack of 1" |
| "This Faithfull Cloth Sanding Belt is manufactured from a tough, sharp abrasive on a durable cloth belt for high-speed industrial use on ferrous metals and hardwoods. It is suitable for both stock removal and finishing applications.Specifica..."
Price: 2.49 |
| "General Purpose Universal Diamond Cutting Disc 300mm 300mm" |
| "300mm General Purpose Diamond Blade for Bricks, Concrete, Concrete Lintels, Limestone and Sandstone.Size 300mm / 12""Bore 20mm..."
Price: 29.95 |
| "Dremel SC409 EZ SpeedClic Thin Cutting Wheels 38mm Pack of 5" |
| "Dremel, the inventor of the SpeedClic quick-change system for rotary tool accessories, now offers an extended line of SpeedClic metal cutting accessories. The SC456, SC456B and SC409 are replacement metal cutting wheels, whereby the SC409 wheels have..."
Price: 10.95 |
| "Draper Punched Hook and Loop Sanding Sheets 90mm x 187mm 100g Pack of 10" |
| "Hole punched with hook and loop fixing. Assorted pack comprises 3 x 60, 4 x 80 and 3 x 120 grit grades.Packed ten sheets per pack. Grade: 100..."
Price: 2.49 |
| "Bosch Optiline Wood Cutting Mitre Saw Blade 216mm 48T 30mm" |
| "The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accura..."
Price: 28.95 |
| "Festool Sp Jigsaw Blade Splinterguard Pack of 5" |
| "Prevents splintering qty. in pack 5 pieces..."
Price: 6.95 |
| "Draper SI25K Soldering Kit 240v" |
| "Comprising 25W soldering iron with 1.2M (approx.) cable and approved plug, straight tip, tube of solder, bent tip, tweezers, stand and sponge. Manufactured to BS EN 60335-2-45 Specifications Description: Soldering Kit..."
Price: 17.95 |
| "Draper Bench Grinder Wire Wheel 150mm 19mm 50mm" |
| "For use with Draper bench grinders and other manufacturers similar machines. Supplied with reducing bushes size; 12.7, 16, 20, 22.2 and 26mm. Dia. x Bore: 150 x 50mm Width: 19mm..."
Price: 14.95 |
| "Draper 19mm Shank Mortice Chisel 1/4""" |
| "Manufactured from high carbon steel hardened and tempered, finely ground, polished with honed cutting edges. Mortice Square: 1/4"" Chisel Shank Diameter: 19mm..."
Price: 13.95 |
| "Steinel Reduction Nozzle for HL Models and HG 2120 E, 2320 E and 2220 E 9mm" |
| "Reduction nozzles deliver a concentrated flow of hot air, making them ideal for use where extra precision is required. This 9mm reduction nozzle can also be used for desoldering and welding plastics in conjunction with the Steinel 079015 Welding nozz..."
Price: 6.49 |
