| "Trend CRAFTPRO Rounding Over Router Cutter 22.2mm 15mm 8mm" |
| "For producing ovolo and rounding over edge moulds, using a side fence or back fence. D: 7/8 inch D: 22.2 mm C: 19/32 inch C: 15 mm R: 9.5 mm OL: 58 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 22.2 Dia Imperial: 7/8 Cut Len..."
Price: 22.95 |
| "Trend CRAFTPRO Single Flute Router Cutter 1.5mm 6mm 1/4""" |
| "Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. D: 1.5 mm C: 6mm Shank Diame..."
Price: 15.95 |
| "Trend TCT Grooving Cutter 125mm 14mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 138.95 |
| "Trend Replacement Cutter Bearings Metric OD 24mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend CRAFTPRO Wood Cutting Cordless Saw Blade 184mm 24T 20mm" |
| "Thin kerf sawblades for cordless saws. Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraz..."
Price: 13.95 |
| "Trend Two Flute Hinge Recess Router Cutter 12.7mm 19mm 1/4""" |
| "Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. D: 1/2 inch D: 12.7 mm C: 19 mm OL: 51 mm Shank ..."
Price: 22.95 |
| "Trend Snappy Kitchen Hinge Cutter 15mm" |
| "For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. The 15mm machine bit is designed to suit cam and dowel fixings. It is recommended that these bits are used in a drill stand. D: 15 mm ..."
Price: 8.49 |
| "Trend Guided Economy LaminateTrimmer Router Cutter 6.3mm 10mm 1/4""" |
| "Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only The guide length is 3mm. S48/39 is a shorter version of Ref. S48/40. D: 1/4 inch D: 6.3 mm C: 10 mm OL: 38 mm A: 90 degrees Shank Diameter: 1/4 inch Shank Diameter..."
Price: 31.95 |
| "Trend Classic Roman Ogee Panel Router Cutter 26mm 17mm 1/4""" |
| "Ogees without bearings create classic style for moulding, panelling and jointing. D: 26 mm D2: 8 mm C: 17 mm R: 4 mm OL: 46 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 26 Cut Length Metric: 17 Overall Length Metric: 46 ..."
Price: 60.95 |
| "Trend Leigh Dovetail Jig Straight Router Cutter 26mm 70mm 8mm" |
| "For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. D: 8 mm C: 26 mm OL: 70 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 8 Cut Length Metric: 26 Overall Length Metric: 70..."
Price: 24.95 |
| "Trend Dovetail Cutter for DC400 Jig 11.3mm 9.5mm 1/4""" |
| "Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks. D: 11.3 mm C: 9.5 mm OL: 59 mm A: 104 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 11.3 Cut Length Metric: 9.5 Cut Length Imperi..."
Price: 18.95 |
| "Trend CRAFTPRO Easyset Ogee Panel Door Set 50mm 17mm 12mm" |
| "A panel door set consisting of a Easyset profile scriber and panel raiser cutter. Supplied in a storage case. Shank Diameter: 12 mm Profile scriber: R: 4 mm D: 41 mm B: 22 mm C: 17 mm C2: 6.35 mm OL: 90 mm Panel raiser: R: 12 mm D: 50 mm..."
Price: 104.95 |
| "Trend Staff Nosing Bead Router Cutter 19mm 6mm 1/4""" |
| "Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging. D: 19 mm C: 6 mm C2: 22 mm R: 3 mm OL: 54 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19 Cut..."
Price: 57.95 |
| "Trend CRAFTPRO Chamfer V Grovve Router Cutter 12.7mm 11mm 1/2""" |
| "For veining, panelling, 'V' grooving, bevelling & chamfering. Diameter: 1/2 inch Diameter: 12.7 mm C: 7/16 inch C: 13 mm C2: 13 mm C3: 11 mm A: 60 degrees OL: 55 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 12.7 Dia Imp..."
Price: 17.95 |
| "Trend Replacement Cutter Bearings Metric OD 23mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend CRAFTPRO Bearing Guided Cavetto Router Cutter 34.5mm 15.9mm 1/4""" |
| "Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. C: 5/8 inch C: 15.9 mm D: 34.5 mm B: 12.7 mm R: 7.9 mm OL: 67.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 34.5 Cut Len..."
Price: 38.95 |
| "Trend Roman Ogee Bearing Guided Router Cutter 25.4mm 15.9mm 1/4""" |
| "With bearing guided ogees, change profile by using a larger bearing and vary the depth. D: 1 inch D: 25.4 mm C: 5/8 inch C: 15.9 mm B: 9.5 mm B2: 12.7 mm R: 4 mm OL: 54 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 25.4 ..."
Price: 45.95 |
| "Trend Mini Ogee Bearing Guided Router Cutter 18.3mm 9.5mm 1/4""" |
| "Miniature moulding cutters for small decorative effects on furniture or for reduced scale hobby work. D: 18.3 mm C: 9.5 mm B: 6.3 mm R: 2 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 18.3 Cut Length Metric: 9.5 Cut Length ..."
Price: 39.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 15mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 19/32 inch D: 15.0 mm C: 1 inch C: 25 mm OL: 67..."
Price: 16.95 |
| "Trend Aluminium UPVC Single Flute Narrow Neck Helical Cutter 10mm 14mm 10mm" |
| "Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute helical for drilling and slotting, cutting aluminium anodi..."
Price: 38.95 |
| "Trend Drawer Pull Router Cutter 45mm 17mm 1/2""" |
| "An initial cut with a straight cutter is required to produce the drawer pull profile. D: 45 mm D2: 24 mm C: 17 mm R: 5 mm R2: 2 mm OL: 60 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 45 Dia2 Metric: 24 Cut Length Metric:..."
Price: 100.95 |
| "Trend Rotatip Trimmer Bearing Guided Router Cutter 19mm 12mm 1/4""" |
| "Blades that can be rotated in 90 degree increments giving three extra new edges. D: 19 mm C: 12 mm B: 19 mm A: 90 degrees OL: 52 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19 Cut Length Metric: 12 Overall Length Metric: 5..."
Price: 61.95 |
| "Trend Shoulder Ovolo Scribe Router Cutter 36.7mm 9mm 1/4""" |
| "For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. D: 36.7 mm C: 9 mm B: 12.7 mm R: 9 mm OL: 48.1 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 3..."
Price: 66.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 40mm 3mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 40 mm Kerf: 3.0 mm No. of Teeth: 2 Dia Metric: 40 Sawb..."
Price: 22.95 |
| "Trend TCT No Scriber Hinge Sinking Bit 26mm 3/8""" |
| "These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. D: 26 mm OL: 65 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Metric: 26 ..."
Price: 41.95 |
| "Trend STC Pin Guided Spiral Upcut Router Cutter 3.2mm 9.5mm 1/4""" |
| "Solid carbide two flute pin guided spiral for trimming acrylic and wood and MDF. Solid brass pin guide. Two flute for clean finish on abrasive materials. Small diameter of 3.2mm for access into tight corners. Ideal for cleaning up edges for sign maki..."
Price: 54.95 |
| "Trend Roman Ogee Bowl Bearing Guided with Lip Router Cutter 60.7mm 25mm 12mm" |
| "Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens. For finishing undermount bowl. With lip. D: 60.7 mm C: 25 mm C2: 32 mm B: 21.8 mm A: 72 degrees R: 14 mm OL: 8..."
Price: 100.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 5mm 12mm 8mm" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 16.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 130mm 24T 20mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spind..."
Price: 13.95 |
| "Trend HSS Drill Countersink Size 6 1/2""" |
| "They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Pl..."
Price: 19.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 9.5mm 24.5MM 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 3/8 inch D: 9.5 mm C: 1 inch C: 25.4 mm Ol: 66 ..."
Price: 12.95 |
