|
| |
| "Einhell TE-LL 360 Cross Laser Level" |
"The Einhell TE-LL 360 Cross Laser Level is an ideal aid for installation, renovation and laying jobs. The horizontal 360° laser line makes it easy to align objects to the same level in rooms. It projects a horizontal and a vertical laser line to make quick and easy work of measuring jobs. It also has a digital spirit level function. Fitted with a self-levelling function, the LED warns the user of tilt angles greater than 4° degrees. The self-levelling time is five seconds. The level features an integrated 1/4in thread for use on a tripod. It also has a soft grip body for comfortable and secure handling. For working comfort there is a height-adjustable wall bracket. Supplied with: 1 x Height Adjustable Wall Bracket & 1 x Storage Bag. Specification Laser Class: 2, Level Accuracy: ±0. 4 mm/m. Self-Levelling Range: 4°.Number of Beams: 2. Working Range: 20M. Power: 2 x AA Batteries (Not Included).Weight: 0. 27kg."
Price: 116.93
|
|
| "Einhell 2270115 Telescopic Tripod For Laser Levels" |
"The Einhell Tripod has 3 sectioned, telescopic legs that extend from 37cm to a maximum of 110cm. Suitable for the TC-LL 1, TC-LL 2 & TE-LL 360 Lasers."
Price: 20.71
|
|
| "Einhell TC-LD 25 Laser Measuring Tool 25m" |
"The Einhell TC-LD 25 Laser Measuring Tool is a small and handy pocket-sized tool for measuring distance, area and volume. Variable settings allow measuring from either the front or rear edge of the tool and the Min/Max function allows continuous measurements. The body is fitted with a soft grip, making it comfortable to handle. For safety the laser beam is only activated after the switching on operation is repeated. It switches off automatically after three minutes without being used. Ideal for measuring areas on building, restoration and renovation jobs, also for landscaping the garden or for the accurate measurement of work pieces in the home workshop. Supplied in a practical bag for storage. Specification Accuracy: ±3mm. Operating Range: 0. 5-25m. Power Supply: 2 x AAA Batteries (Not Included)."
Price: 47.68
|
|
| "Einhell TC-TC 618 Tile Cutter 600 Watt 240 Volt" |
"The Einhell TC-TC 618 Tile Cutter has a generously sized work table to provide secure support for guiding large tiles. The cutter has both a mitre cut guide and a parallel guide for mitre and longitudinal cuts. Its diamond cutting wheel runs in a rustproof water tank which not only cools the cutting wheel continuously but also helps prevent the spread of dust. Specification Input Power: 600 Watt. No Load Speed: 3, 000/min. Cutting Wheel: 180mm x 25. 4mm Bore. Cutting Depth: @90°: 35mm, @45°: 22mm. Weight: 9. 37kg."
Price: 69.31
|
|
| "Einhell TC-LD 50 Laser Measuring Tool 50m" |
"The Einhell TC-LD 50 Laser Measuring Tool is a practical and precise tool for measuring distance, area and volume. Variable settings allow measuring from either the front edge, rear edge or stop plate of the tool. Calculations can be performed quickly and easily on the spot and results can be added or subtracted. It also has a practical Pythagoras function making it possible to measure lengths and heights indirectly. The Min/Max function allows continuous measurements. The pitch function allows measurements of predefined distances, for example for staking out fence posts. The last 20 measurement results are saved automatically. The body is fitted with a soft grip, making it comfortable to handle. For safety the laser beam is only activated after the switching on operation is repeated. It switches off automatically after three minutes without being used. Ideal for measuring areas on building, restoration and renovation jobs, also for landscaping the garden or for the accurate measurement of work pieces in the home workshop. Supplied in a practical bag for storage. Specification Accuracy: ±2mm. Operating Range: 0. 5-50m. Power Supply: 2 x AAA Batteries (Not Included)."
Price: 73.06
|
|
| "Einhell TC-MD 50 Digital Detector" |
"The Einhell TC-MD 50 Digital Detector is the ideal tool for DIY enthusiasts in the home, at the building site or for renovation work. It ;reliably locates metal, wood and electric leads. It detects ferrous metals such as steel and live wires to a depth of 50mm and non-ferrous metals such as copper to a depth of 38mm. Wood can also be detected to a depth of 19mm. It is simple and easy to operate due to its acoustic warning signal. Protector pads are also fitted on the back to protect the wall. The soft grip makes it comfortable to operate with just one hand. If set down to one side, it automatically switches off after one minute, without being used. Specification Detection Depth: Wood/Metal: 19mm, Ferrous Metal/Live Wires: 50mm, Non-Ferrous Metals/Copper: 38mm. Power Supply: 1 x 9 Volt 6F22 Battery (Not Included).Weight: 0. 34kg."
Price: 26.14
|
|
| "Footprint Club Hammer Fibreglass Shaft 2.1/2lb" |
"This Footprint Club Hammer has a forged, hardened and tempered head, and a solid fibreglass core handle for strength. Its thick rubberised grip provides superior comfort when striking objects and helps to absorb shock. A large safety loop allows tethering the hammer for working at height."
Price: 14.62
|
|
| "Footprint Club Hammer Fibreglass Shaft 4lb" |
"This Footprint Club Hammer has a forged, hardened and tempered head, and a solid fibreglass core handle for strength. Its thick rubberised grip provides superior comfort when striking objects and helps to absorb shock. A large safety loop allows tethering the hammer for working at height."
Price: 16.3
|
|
| "Footprint Brick Bolster 75mm (3in)" |
"Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK."
Price: 8.82
|
|
| "Footprint 11220 Brick Bolster 100mm (4in)" |
"Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK."
Price: 9.91
|
|
| "Footprint 1236 Brick Bolster 114mm (4.1/2in)" |
"Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK."
Price: 12.07
|
|
| "Footprint Brick Bolster With Guard 75mm (3in)" |
"The Footprint Brick Bolsters are fully drop forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses. The bolsters provide extra strength because the handle, blade and head are drop forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long lasting edge. The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high quality hand guard for added safety. Made in the UK. Manufactured to BS3066."
Price: 11.86
|
|
| "Footprint Brick Bolster With Guard 100mm (4in)" |
"The Footprint Brick Bolsters are fully drop forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses. The bolsters provide extra strength because the handle, blade and head are drop forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long lasting edge. The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high quality hand guard for added safety. Made in the UK. Manufactured to BS3066."
Price: 12.97
|
|
| "Footprint 182 Hacking Knife 4.1/2in" |
"This hacking knife has a steel blade with twin leather scales riveted to the shaft. It can be struck with a hammer to remove old putty from window frames. Size: 4. 1/2in."
Price: 9.14
|
|
| "Footprint 1860 Grooved Plugging Chisel" |
"The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm. Chisel Length: 265mm."
Price: 6.97
|
|
| "Footprint 1861 Grooved Plugging Chisel With Guard" |
"The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm. Chisel Length: 265mm."
Price: 10.03
|
|
| "Footprint 241 Square Scraper Set" |
"A 3 piece rectangular Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood. Comprises 1 of each:- 6 x 3 inch Scraper5 x 2 1/2 inch Scraper4 x 2 inch Scraper"
Price: 15.43
|
|
| "Footprint 246 Dovetail Saw 200mm (8in) 20tpi" |
"The Footprint 246 Dovetail Saw is made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England. Blade Length: 200mm (8in).Teeth: 20 tpi."
Price: 59.28
|
|
| "Footprint 256 Brass Back Tenon Saw 250mm (10in) 15tpi" |
"The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England."
Price: 59.08
|
|
| "Footprint 256 Brass Back Tenon Saw 350mm (14in) 13tpi" |
"The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England."
Price: 61.48
|
|
| "Footprint Flooring Chisel 57mm (2.1/4in)" |
"This Footprint Flooring Chisel is a traditional tool for lifting floor boards, chasing plaster etc. The chisel is made from carbon steel with a hardened and tempered blade. It is forged with a domed, anti-mushroom head. Not suitable for use on concrete or stone. Size: 230 x 15 x 60mm (9 x 5/8 x 2. 1/4 inch)."
Price: 6.78
|
|
| "Footprint 578 Scutch Comb Holder 38mm (1.1/2in)" |
"For detachable stone dressing combs which are used for preparation of surface prior to re-rendering. Manufactured to British standard."
Price: 12.46
|
|
| "Footprint 620C Line Pin Card of 2" |
"The Footprint 620 Line Pins are made from drop forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builders string to make sure that a course of bricks is straight and true. Length: 6. 1/4in."
Price: 5.77
|
|
| "Footprint 6989w Pipe Wrench 230mm (9in) Capacity 48mm" |
"The Footprint 698w Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumbers tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle."
Price: 14.93
|
|
| "Footprint 9009w Thumbturn Pipe Wrench 230mm (9in) Capacity 50mm" |
"The Footprint 900w Pipe Wrenches feature a thumbturn knurled nut which provides easy adjustment with one hand. The teeth are induction hardened to ensure a high grip is maintained. This style has a rounded end to the hook handle."
Price: 18.67
|
|
| "Footprint Heavy-Duty Knife Blades (Pack of 100)" |
"These Footprint Heavy-duty Knife Blades are suitable for cutting a variety of materials, including carpet, vinyl, cardboard, leather and canvas. The blades have been oiled to prevent rusting and are suitable to fit most trimming knives. They are supplied in a high-visibility, wall-mountable container. Pack quantity: 100"
Price: 11.99
|
|
| "Footprint Club Hammer Fibreglass Shaft" |
"This Footprint Club Hammer has a forged, hardened and tempered head, and a solid fibreglass core handle for strength. Its thick rubberised grip provides superior comfort when striking objects and helps to absorb shock. A large safety loop allows tethering the hammer for working at height."
Price: 14.62
|
|
| "Footprint Brick Bolsters" |
"Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK."
Price: 8.82
|
|
| "Footprint Brick Bolster with Guard" |
"The Footprint Brick Bolsters are fully drop forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses. The bolsters provide extra strength because the handle, blade and head are drop forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long lasting edge. The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high quality hand guard for added safety. Made in the UK. Manufactured to BS3066."
Price: 11.86
|
|
| |
|
