|
| |
| "Trend 10/11 x 1/2 TCT V Groove Chamfer 45° 19.0 x 38mm" |
"These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V grooving. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T. C.T. Shank 1/2in. A = 45° D = 38 mm C1 = 19 mm C2 = 26. 5 mm"
Price: 51.12
|
|
| "Trend 105/35 x 1/2 TCT Hinge Sinking Machine Bit 35mm" |
"Machine Bit for use in hand portable plunge routers. These specially designed machine bits have a new form of scribe to allow use at high speeds.(Max. 20, 000 /Min). For accurate repetitive routing, a template and guide bush fitted to the router base should always be used. Diameter: 35mm. Shank Diameter: 1/2inch Recommended Speeds 1, 000: 20, 000/Min."
Price: 61.62
|
|
| "Trend 10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm" |
"These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Pin guarded cutters enable curved work to be undertaken, bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T. C.T1/4in Shank. A = 45° C1 = 10 mm C2 = 14 mm"
Price: 42.65
|
|
| "Trend 11/3 x 1/2 TCT V Groove Cutter 45° 9.2 x 19.1mm" |
"Chamfer V grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1. 0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 29.56
|
|
| "Trend 11/5 x 1/4 TCT V Groove Cutter 60° 10.3 x 12.7mm" |
"Chamfer V grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1. 0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 27.55
|
|
| "Trend 13/30 x 1/2 TCT Radius Cutter 12.7mm Radius" |
"These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards."
Price: 62.24
|
|
| "Trend 18/80 x 1/2 TCT Bearing Guided Bevel Panelling 15°" |
"Used when machining traditional panels and frame doors. Work formerly done on spindle moulders can now be performed with heavy-duty routers mounted in fixed positions, either overhead or inverted. These raised panel cutters run best at lower speeds between 12, 000 and 18, 000 rpm and match the Trend range of profile scribers. All are suitable for use on natural timbers and MDF. T. C.T. 1/2in Shank. D - 86 mm C - 12. 7 mm B - 12. 7 mm A - 15°"
Price: 114.72
|
|
| "Trend 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm" |
"These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2. 0mm diameter and below should be a maximum of 1. 0mm per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks. Shank: 1/4in."
Price: 22.94
|
|
| "Trend 24/12 x 1/4 TCT Plug Maker No.12" |
"These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1, 000-20, 000 /min."
Price: 49.13
|
|
| "Trend 24/80 x 1/4 TCT Plug Maker No.8" |
"These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1, 000-20, 000 /min."
Price: 49.13
|
|
| "Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0mm x 11mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 20.95
|
|
| "Trend 3/03 x 1/4 TCT Two Flute Cutter 4.5mm x 11mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 22.32
|
|
| "Trend 3/08 x 1/2 TCT Two Flute Cutter 12.7mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 26.18
|
|
| "Trend 3/08 x 1/4 TCT Two Flute Cutter 12.7mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 26.18
|
|
| "Trend 3/10 x 1/4 TCT Two Flute Cutter 3.2mm x 11mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 20.95
|
|
| "Trend 31/02 x 1/4 TCT Dovetail Cutter 103° 13.2 x 13mm" |
"Trend dovetail cutters are designed for use with commercial dovetailing and stair housing jigs. Also cutters to produce sliding and lapped dovetails, through dovetails and end on dovetails. Suitable for use on natural timbers and man-made boards, they are used extensively in cabinet work, furniture making, stair trenching, dovetail jointing and carcass construction."
Price: 32.18
|
|
| "Trend 3/1 x 1/4 TCT Two Flute Cutter 5.0mm x 16mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 24.31
|
|
| "Trend 3/20 x 1/4 TCT Two Flute Cutter 6.3mm x 16mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 22.32
|
|
| "Trend 3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3mm x 16mm" |
"Trend D-Namic two flute cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass."
Price: 30.18
|
|
| "Trend 3/2 x 1/2 TCT Two Flute Cutter 6.0mm x 16mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 28.81
|
|
| "Trend 3/22 x 1/2 TCT Two Flute Cutter 6.3mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 36.05
|
|
| "Trend 3/3 x 1/4 TCT Two Flute Cutter 7.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 24.95
|
|
| "Trend Arbor Standard Duty 33/60 x 1/4" |
"For use with Trend bearings and slotters. 1/4in shank. Includes: 1 x Arbor1 x Spacer 5mm3 x Spacer 3mm"
Price: 16.1
|
|
| "Trend 3/4 x 1/2 TCT Two Flute Cutter 8.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 28.19
|
|
| "Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 25.57
|
|
| "Trend 342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm" |
"342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly."
Price: 61.62
|
|
| "Trend 342 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm" |
"342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly."
Price: 61.62
|
|
| "Trend 348 x 1/2in TCT Intumescent Cutter Set 15mm" |
"Cutter Set Ref. 348 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groove for 20mm strip. Choose alternative bearings to suit other thicknesses of intumescent strip. D1 40 mm Cut length 15 mm B 32 mm E 4 mm L 41 mm Shank Diameter 1/2 inch."
Price: 94.3
|
|
| "Trend 3/50 x 1/4 TCT Two Flute Cutter 9.5mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 27.55
|
|
| |
|
