|
| |
| "Trend 50/06 x 8mm HSSE Helical Plunge Bit 6mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 20.33
|
|
| "Trend 50/08 x 8mm HSSE Helical Plunge Bit 8mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 18.34
|
|
| "Trend 50/19 x 8mm HSSE Steel Helical Plunge Bit 5mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 28.19
|
|
| "Trend 50/51 x 8mm HSSE Helical Plunge Bit 8mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 30.12
|
|
| "Trend 5/1 x 1/4 TCT Hinge Recessor 12.7 x 19mm" |
"Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12. 7mm. Cutting length: 19mm. Shank: 1/4in."
Price: 24.95
|
|
| "Trend 6200/8 HS Countersink Set" |
"These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key. They are designed to drill and countersink simultaneously a wide variety of materials."
Price: 18.55
|
|
| "Trend 6200/8 TCT Countersink Set" |
"These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key. They are designed to drill and countersink simultaneously a wide variety of materials."
Price: 29.93
|
|
| "Trend 620/4WS Countersink" |
"Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals."
Price: 11.35
|
|
| "Trend 62/10 x 1/4 TCT Drill / Countersink / Counterbore" |
"These combination tools in TCT can be used in abrasive materials. They will drill, countersink and finally counterbore a parallel hole. Designed to receive plug maker group 24. The drill diameter sizes are for a clearance hole only. For use with drilling machines or routers. Specifications: T. C.T. 1/4in Shank. Woodscrew Size. No. 10. Drill Diameter 7/32in. Countersink Diameter. 12mm. Drill Length. 20mm."
Price: 55
|
|
| "Trend 63127 Collet Sleeve 6.35mm to 12.7mm" |
"Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work."
Price: 13.81
|
|
| "Trend 7/01 x 1/4 TCT Ovolo & Round Over 2.5mm Radius" |
"Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters. Specifications: Tooling: T. C1/4in Shank. D =3/8 inch. D =9. 5 mm. D2=3. 2 mm. C =9 mm. R =2. 5 mm."
Price: 26.18
|
|
| "Trend 7E/2 x 1/4 TCT Pin Guided Round Over 6.3mm Radius" |
"Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters."
Price: 45.91
|
|
| "Trend 7E/3 x 1/4 TCT Pin Guided Round Over 8.0mm Radius" |
"Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters."
Price: 45.91
|
|
| "Trend 9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 54.35
|
|
| "Trend 9/72 x 1/2 TCT Bearing Guided Corner Bead Cutter 4.8 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 66.85
|
|
| "Trend 9/73 x 1/4 TCT Bearing Guided Corner Bead Cutter 7.0 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 74.09
|
|
| "Trend 9/74 x 1/2 TCT Bearing Guided Corner Bead Cutter 9.5 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 78.55
|
|
| "Trend Airace Airshield" |
"Dust mask with replaceable filter for use when routing - for industrial and construction work, DIY and various other trades. It has a five times larger surface area than the average disposable dust mask, giving superior protection against dust inhalation and offering considerable cost savings. The one way exhaust valve vents to the underneath, preventing exhaled air from fogging goggles or the optional visor, this also ensures that the filter stays dry reducing filter clogging and prolonging its life. P2 electrostatic filter has approximately life of ten times that of average disposable facemask. Protects the user against hazardous toxic dust particles, metal fumes and mist to classification P2 and down to 0. 3 microns enabling use with MDF. Respiratory protection to BS EN143 P2."
Price: 36.86
|
|
| "Trend THP2 Filter Pack (Pair)" |
"The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Attachment points for optional ear defenders. Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8-hour Ni MH battery. Specifications: Rating: DIY/Craftsman/Professional. Airflow Min: 160 l/Min. Airflow fully charged: 200 1/Min. Size of headband: 52cm - 62cm. Motor sound level: 70 dB. Battery: 8-hours Ni MH battery. Weight: 995 g. Voltage: 230 volt. Eye protection: BS EN 166 (low energy impact).Respiratory protection: BS EN 12941 THP2(NPF50)."
Price: 34.68
|
|
| "Trend Anglefix Mitre Guide" |
"The Trend Anglefix Mitre Guide halves the angle for mitre joints and is ideal for mitre cutting of frames, skirting, architrave and beading as well as basic marking out. It halves angles to achieve correct cutting angle before cutting mitres and sets internal and external angles. Can be used with hand mitre and snip-off saws. Patent No. PCT WO 00/67969."
Price: 26.72
|
|
| "Trend AQ63/B/25 Aqua 63 Brown 25mm" |
"Aqua 63 style strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted, it is necessary to notch the seal end. Returns to original shape after compression. Stretching and shrink back at corners avoided. Suitable for all main timber Low compression force helps ease window and door operation. Maintains weathering characteristics and resists compression set over a wide temperature range +70° C to - 30° C. Research has proved that Aquamac TM Weatherseal gives high levels of sound reduction. Unaffected by paint stains, window and door types."
Price: 50.06
|
|
| "Trend B127 Replacement Bearing 1/2in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 7.36
|
|
| "Trend B16 Replacement Bearing 5/8in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 4.37
|
|
| "Trend B19 Replacement Bearing 3/4in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 4.87
|
|
| "Trend BSC/0/100 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 9.06
|
|
| "Trend BSC/10/100 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 9.06
|
|
| "Trend BSC/20/100 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 9.06
|
|
| "Trend BSC/20/1000 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 39.91
|
|
| "Trend C002 x 1/4 TCT Two Flute Cutter 4.0mm x 11.1mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 14.47
|
|
| |
|
