|
| |
| "DEWALT Multi Material Drill Bit 7.0mm OL:123mm WL:93mm" |
"These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes."
Price: 3.97
|
|
| "DEWALT DW088CG Cross Line Green Laser" |
"The DEWALT DW088CG Cross Line Green Laser is self-levelling up to 4° and accurate to ±0. 3 mm/m in levelling applications. It has an integrated magnetic pivoting base with 1/4in thread for use with tripod. With automatic out of level indication that can mark a levelled line in seconds and maintains full brightness for visibility. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmolded housing and thick glass protect the tool and help maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector. Works with DE0892G detector (NOT SUPPLIED) up to the distance of 50 metres. Specification: Laser Class: 2, Level Accuracy: ±3mm@10m Self-Levelling Range: 4°.Visibility Indoor: 20m. Power: 3 x AA Batteries (Supplied).Thread: 1/4in."
Price: 238.46
|
|
| "DEWALT DCB115 XR Multi-Voltage Charger 10.8-18V Li-Ion" |
"The DEWALT DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2. 0Ah battery pack in 30 minutes. Specification Voltage: 10. 8/14. 4/18 Volt. Battery Chemistry: Li-Ion Charging Current: 4. 0 A."
Price: 213.85
|
|
| "DEWALT DCE089NR Self-Levelling Red Multi Line Laser 10.8 Volt Bare Unit" |
"The DEWALT DCE089NR Self-Levelling Red Multi Line Laser projects 3, 360° self-levelling, horizontal and vertical lines. It has a variable blink sequence for manual mode and a full-time pulse mode for use with detector to maintain full brightness and visibility. The locking pendulum helps to prevent damage to internal components and there is an integrated magnetic pivoting base with a 1/4in thread. The wear resistant, over mould is rated to IP65, meaning it is resistant to water and dust damage. It has also been drop tested to 2m. Bare Unit, No Battery or Charger Supplied."
Price: 530.77
|
|
| "DEWALT Challenger 3 Sympatex Black Boots Size UK 9 Euro 43" |
"The DEWALT Challenger 3 Sympatex Waterproof Hiker Boots have a full grain nubuck leather upper with a Sympatex waterproof and breathable membrane. The TPU sole is resistant to petrol, chemical’s, oil and temperatures up to 120°C. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toe cap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection and a dual density anti-bacterial insole. Available in Black or Brown. EN Test: CE EN ISO 20345-2011. Safety Rating: S3-WR. Slip Rating: SRA."
Price: 96.14
|
|
| "DEWALT D26203 1/4in Plunge Router Variable Speed 900W 110V" |
"The DEWALT D26203 is a 1/4 inch (8mm) variable speed router with full wave electronic speed control with feedback which ensures the selected speed is maintained under any load for a consistent finish in all grades of timber, aluminium and plastics. It has variable speed control (16, 000 to 27, 000/min) this enables router bit to be optimised for application. The compact, light weight design that increase ease of use and user comfort and the plunge base incorporates fine tune rod for precise depth adjustment. The five position adjustable turret enables stepped or repeated plunge cuts with the over moulded rubber handles provide a comfortable and secure grip. The dual LED lights increase the visibility around the router bit during operation and the multiple spindle lock detants enables quick and simple router bit change. Supplied with: Parallel fence, dust extraction adapter, 8 mm collet (1/4 inch), 17 mm spanner, 17 mm guide bush and Centering Cone. Specification Input Power: 900WNo Load Speed: 8, 000-27, 000/min. Collet: 6/8mm (1/4in) Plunge Depth: 55mm Max. Cutter Diameter: 36mm Weight: 2. 9kg"
Price: 330.77
|
|
| "DEWALT D26421L 1/2 Sheet Non-Electronic Orbital Sander 350W 110V" |
"The DEWALT D26421 Non-Electronic Orbital Sander 1/2 Sheet professional sander has a high performance motor with aluminium bearing seats for continuous use and a long life. The small orbit size gives a smooth finish, whilst the efficient dust collection using integrated dustbag or external dust extractor for a better sanding performance and sheet life. Sturdy, easy action abrasive sheet clips that securely hold the sheet and are also inset to avoid contact with adjacent surfaces. Optional hook and loop base pad included to enable fast sanding sheet changes. Includes: Fabric and paper dust bags with built-in extractor connection and support tray, Nylon hook and loop sanding pad, Hook and loop sanding sheet. Specification Input Power: 350WOscillating Speed: 22, 000/min. Oscillating Size: 2. 5mm Base Size: 112 x 236mm Weight: 2. 8kg"
Price: 300
|
|
| "DEWALT DCC018N XR Triple Source Inflator 18V Bare Unit" |
"The DEWALT DCC018N XR Triple Source Inflator is a compact and lightweight, high-performance inflator with a durable easy-to-use design. The digital gauge allows you to preset desired 'psi' and pressure display for easy display and ease, whilst the automatic shut-off feature prevents over inflation. Ideal for tackling big tasks thanks to its high/low pressure output. The inflator is capable of inflating at a rate of up to 0. 35L/min. @ 6. 2 bar or 0. 6L/min. @ 2 bar. Includes: 1 x 12V Car Power Adaptor and 3 x Accessory Bits. Bare Unit, No Battery or Charger Supplied. Specification: Units of measure: bar, kPa, psi Output: up to 0. 35L/min. @ 6. 2 bar, 0. 6L/min. @ 2 bar Weight: 2. 7kg"
Price: 146.15
|
|
| "DEWALT Tool Connect Tag (10 Pack)" |
"The DEWALT Tool Connect Tag can be connected to any tool/asset, enabling it to be added to the Tool Connect inventory. It provides a wide range of alerts and acts as a deterrent against theft. IP68 Rated. Within the Tool Connect app you can assign a name and image to the attached item."
Price: 264.61
|
|
| "DEWALT DCS577N FlexVolt XR High Torque Circular Saw 18/54V Bare Unit" |
"The DEWALT DCS577 Flex Volt XR High Torque Circular Saw is part of the XR Flex Volt platform offering unrivalled runtime and performance. Heavy-duty construction applications can be completed without the need for mains power. Its high torque brushless motor delivers up to 5, 800rpm of power, perfect for first fix applications. The diamond bore drive system transmits the generated high torque more effectively, delivering superior performance and faster cuts. The gearbox and blade guard are made from robust aluminium for greater durability. This circular saw incorporates an easy-to-use tool free depth adjustment, 65mm at 90°/ 50mm at 45°, that allows for quick adjustments saving time and ease. Fitted with an over moulded rear handle for improved comfort and grip whilst cutting longer materials. Its also Airlock compatible dust extraction system for safer cleaner environment. Tool connect ready for jobsite connectivity of inventory management (Tag Not Included). DCS577T2: 2 x 18/54V 6. 0/2. 0Ah Li-ion Batteries. DCS577N: Bare Unit, No Battery or Charger. Specification: No Load Speed: 5, 800/min. Max. Cutting Depth: 65mm @ 90º, 50mm @ 45°Blade: 190 x 30mm Bore"
Price: 403.08
|
|
| "DEWALT DE9135 Multi-Chemistry Charger 7.2 -18V NiCd/NiMH/Li-Ion" |
"The DEWALT DE9135 Multi Chemistry Charger is suitable for all DEWALT 7. 2-18 Volt Ni Cd/Ni MH/Li-Ion batteries, so users only need one charger for multiple cordless products. Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold. It has a 3-stage charging system which provides maximum runtime and extends the overall life of the battery. Voltage: 7. 2-18 Volt. Battery Chemistry: Ni Cd/Ni MH/Li-Ion. Charging Current: 3 A."
Price: 135.38
|
|
| "DEWALT Extreme Flatwood Drill Bit 28mm x 152mm" |
"The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials."
Price: 6.82
|
|
| "DEWALT Impact Torsion Bits PZ2 25mm Pack of 5" |
"The DEWALT Impact Torsion Pozi Bits have a 15° torsion zone that allows the screwdriver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in packs of 2, 5 or 15."
Price: 6.53
|
|
| "DEWALT DWE560L Compact Circular Saw 184mm 1350W 110V" |
"The DEWALT DWE560 Compact Circular Saw is lightweight and easy to use with a 65mm depth of cut. Its high power 1, 350 Watt motor gives increased cutting performance, and the cutaway inner guard gives improved line of sight to cutting line. Has a dust blower, which clears dust and debris from the cut line. The efficient dust extraction port minimises airborne dust particles when connected to a dust extraction unit. The circular saw has direct compatibility with the DEWALT Air Lock system for easy, secure connection to extraction hose. Supplied with: 24 tooth saw blade, rip fence, dust extraction spout, and blade spanner. Specification Input Power: 1, 350 Watt. No Load Speed: 5, 500/min. Max Cutting Depth: @90°: 65mm, @45°: 42mm. Blade: 184x16mm Bore, 24 Tooth. Bevel Capacity: 48°. Length: 286mm. Height: 226mm. Weight: 3. 7kg."
Price: 163.08
|
|
| "DEWALT DCD997P2 XR Brushless Tool Connect Hammer Drill Driver 18V 2 x 5.0Ah Li-ion" |
"The DEWALT DCD997 XR Brushless Hammer Drill Driver with Tool Connect which allows you to set up personalised rpm tool modes. This also can help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allows for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. The DCD997P2 is fitted with a 2 speed all metal transmission for increased runtime and longer tool life. 11 position adjustable torque control for consistent screw driving into a variety of materials. Supplied with 2 x 18V 5. 0Ah Tool Connect Li-ion Batteries, 1 x Multi-Voltage Charger and 1 x TSTAK™ Box. Specification: Chuck Capacity: 13mm Keyless No Load Speed: 0-2, 000/2, 250/min Impact Rate: 0-8, 600/0-25, 500/0-38, 250/bpm Max. Torque Hard/Soft: 95/66Nm Capacity: Wood 55mm, Metal 15mm, Masonry 13mm"
Price: 592.31
|
|
| "DEWALT DCK2088P2T XR Brushless Impact Twin Kit 18V 2 x 5.0Ah Li-ion" |
"The DEWALT DCK2088P2T XR Brushless 2 Speed Twin Kit, contains the following: 1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. Bit Holder: 1/2in Detent Pin No Load Speed: 0-400/0-1, 200/0-1, 900/min. Impact Rate: 0-2, 400/bpm Max. Torque: 950Nm, Breakaway Torque: 1, 625Nm. Max. Bolt Diameter: M20Weight: 2. 62kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6. 35mm (1/4in) No Load Speed: 0-1, 000/0-2, 800/0-3, 250/min. Impact Rate: 0-1, 800/0-2, 900/0-3, 800/bpm Max Torque: 26/80/205Nm Weight: 1. 56kg Also supplied with: 2 x 18V 5. 0Ah Li-ion Batteries, 1 x XR Li-ion Charger and 1 x TSTAK VI."
Price: 609.23
|
|
| "DEWALT DCK2500P2B XR Brushless Tool Connect Twin Pack 18V 2 x 5.0Ah Li-ion" |
"The DEWALT DCK2500P2B XR Brushless Tool Connect Twin Pack, contains the following: 1 x 18V DCD797 XR Brushless Hammer Drill Driver with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allow for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Chuck Capacity: 13mm Keyless No Load Speed: 0-2, 000/min. Impact Rate: 0-9, 300/0-34, 000/bpm Max. Torque Hard/Soft: 70/27Nm Capacity: Wood 40mm, Metal 13mm, Masonry 13mm 1 x 18V DCF888 XR Brushless Impact Driver with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allows for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Precision Drive mode offers additional control in screw driving applications to avoid material and fastener damage. Bit Holder: 6. 35mm (1/4in) No Load Speed: 0-1, 000/0-2, 800/0-3, 250/min. Impact Rate: 0-1, 800/0-2, 900/0-3, 800/bpm Max. Torque: 205Nm Also supplied with: 2 x 18V 5. 0Ah Li-ion Batteries, 1 x DCB113 XR Li-ion Charger and 1 x TSTAK™ Toolbox."
Price: 718.46
|
|
| "Dewalt D25414KT 32mm Sds Plus Multi Drill 1000W 240V" |
"DEWALT D25414KT 32mm SDS Plus Multi Drill with active vibration control has a floating back handle that delivers extremely low vibration and more comfort. The quick change 3 jawed chuck provides speed, precision and flexibility when drilling in wood, ceramic and steel. Optimised power to weight ratio allows for a good power, even in a lightweight package. Rotation-stop provides light chiseling applications, render and tile removal. Ideal for drilling large anchors, fixings and through holes in concrete and masonry from 6 to 32mm in diameter. The large hammer mechanism construction guarantees longer tool life and superior performance. Comes supplied with: Quick release SDS Plus removeable tool holder, quick release 3 jaw removeable chuck, Multi-position side handle and a heavy-duty TSTAK Box. Specification Mode: Rotary, SDS Hammer and Chisel. Input Power: 1, 000 Watt. No Load Speed: 0-820/min. Impact Rate: 0-4, 700/bpm with 4. 2 Joules. Capacity: Wood: 32mm, Steel 16mm, Concrete: 6-32mm, Core: 100mm. Weight: 4. 3kg."
Price: 675.38
|
|
| "DEWALT Construction Circular Saw Blade 235 x 30mm x 40T" |
"DEWALT Construction Circular Saw Blade for use with portable machines to cut softwoods and composite materials. The impact resistant carbide teeth help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails."
Price: 30.97
|
|
| "DEWALT XPC HCS Wood Jigsaw Blades Pack of 20 T101D" |
"The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics."
Price: 37.97
|
|
| "DEWALT Sanding Belts 560 x 100mm 100g (Pack of 3)" |
"The DEWALT Sanding belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life. Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces."
Price: 9.72
|
|
| "DEWALT Multi Material Drill Bit 3.5mm OL:113mm WL:80mm" |
"These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes."
Price: 2.39
|
|
| "DEWALT Extreme Masonry Drill Bit 14 x 200mm" |
"The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability. A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures. Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes. Suitable for masonry, brick, stone, tiles and light concrete."
Price: 9.16
|
|
| "DEWALT DT7512 1/4in Hex to 1/2in Drive Impact Adaptor" |
"The DEWALT DT7515 is a 1/4in hex to 1/2in square conversion adaptor. Length: 52mm."
Price: 15.91
|
|
| "DEWALT SDS Max Drill Bit 20 x 340mm" |
"DEWALT SDS Max high quality hammer drill bit with 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability."
Price: 46.48
|
|
| "DEWALT FlexVolt XR Circular Saw Blade 190 x 30mm x 36T" |
"DEWALT Flex Volt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with Flex Volt Power Tools."
Price: 48.61
|
|
| "DEWALT FlexVolt XR Table Saw Blade 210 x 30mm x 36T" |
"The DEWALT Flex Volt XR Table Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the DEWALT 54 Volt Flex Volt Table Saw to deliver maximum performance."
Price: 77.24
|
|
| "DEWALT DCM562P1 Brushless Outdoor Blower 18V 1 x 5.0Ah" |
"The DEWALT 18V DCM562P1 Brushless Outdoor Blower is supplied with: 1 x 18V 5. 0Ah Li-ion Battery."
Price: 165
|
|
| "DEWALT DCP580P2 XR Brushless Planer 18V 2 x 5.0Ah Li-ion" |
"The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the Air Lock dust extraction system. DCP580P2: 2 x 18V 5. 0Ah XR Li-ion Batteries. DCP580N: Bare Unit, No Battery or Charger Supplied. DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15, 000/min. Cutting Depth: 2mm, Rebate Depth: 9mm Planer Width: 82mm Weight: 2. 5kg"
Price: 513.85
|
|
| |
|
