|
| |
| "Trend B127 Replacement Bearing 1/2in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 7.36
|
|
| "Trend B16 Replacement Bearing 5/8in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 4.37
|
|
| "Trend B19 Replacement Bearing 3/4in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 4.87
|
|
| "Trend BSC/0/100 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 9.06
|
|
| "Trend BSC/10/100 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 9.06
|
|
| "Trend BSC/20/100 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 9.06
|
|
| "Trend BSC/20/1000 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 39.91
|
|
| "Trend C002 x 1/4 TCT Two Flute Cutter 4.0mm x 11.1mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 14.47
|
|
| "Trend C007 x 1/4 TCT Two Flute Cutter 6.3mm x 19.1mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 9.88
|
|
| "Trend C008 x 1/4 TCT Two Flute Cutter 6.3mm x 25.4mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 12.48
|
|
| "Trend C012A x 1/4 TCT Two Flute Cutter 8.0mm 25.0mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 12.48
|
|
| "Trend C013 x 1/4 TCT Two Flute Cutter 9.5mm x 19.1mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 12.48
|
|
| "Trend C015 x 1/4 TCT Two Flute Cutter 9.5mm x 31.8mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 14.47
|
|
| "Trend C016 x 1/4 TCT Two Flute Cutter 10.0mm x 19.1mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 14.84
|
|
| "Trend C022 x 1/4 TCT Two Flute Cutter 12.7mm x 31.8mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 17.11
|
|
| "Trend C024 x 1/4 TCT Two Flute Cutter 15.0mm x 25.4mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 16.1
|
|
| "Trend C044 x 1/4 TCT Chamfer V Groove 45° 6.0 x 12.7mm" |
"Chamfer & V Groove Cutters These types of cutter are used for edging, grooving, veining work and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V grooving. Ball bearing and pin guided cutters enable curved work to be undertaken, bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. The size of V groove on this cutter is:- D = 12. 7mm. C = 6. 0mm. Angle = 45° . T. C.T. Shank: 1/4in."
Price: 16.48
|
|
| "Trend C049 x 1/4 TCT Bearing Guided Chamfer 45° 12.7 x 32mm" |
"Chamfer & V Groove Cutters These types of cutter are used for edging and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V grooving. Ball bearing and pin guided cutters enable curved work to be undertaken, bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T. C.T. Shank. = 1/4in D = 32mm C = 12. 7mm B = 9. 5mm Angle = 45°"
Price: 26.94
|
|
| "Trend C076 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius" |
"Trend CO76X1 Rounding over, self-guiding TCT cutter for rounding over edges do not require a side fence with a 6. 3 mm radius x 12. 7 mm cut. Supplied with two bearings - use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece."
Price: 32.18
|
|
| "Trend C116 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 12.7 x 25.4mm" |
"Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges TCT. Diameter = 12. 7 mm Citting Length = 25. 4 mm"
Price: 18.59
|
|
| "Trend C121 x 1/4 TCT Bearing Guided Template Profile 12.7 x 25.4mm" |
"TCT trimmer with a shank mounted bearings is ideal for template guidance. Use for rebating and trimming edges. Extra care must be taken to avoide breakage of the cutter TCT. D = 12. 7 mm. C = 25. 4 mm."
Price: 19.7
|
|
| "Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm" |
"This two wing slotting cutter is ideal for grooving and rebating operations. A 1/2in diameter bearing is supplied with every cutter. Depth of cut can be changed by purchasing alternative bearing sizes. T. C.T. Shank = 1/4in. C = 6. 3 mm (Slots) Depth with standard cutter = 3/8in."
Price: 24.95
|
|
| "Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm" |
"This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9. 05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10. 6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37. 2 mm Cut length 4 mm B 12. 7 mm B2 16. 0 mm B3 19. 0 mm"
Price: 39.31
|
|
| "Trend C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm" |
"This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9. 05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10. 6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37. 2 mm Cut length 4 mm B 12. 7 mm B2 16. 0 mm B3 19. 0 mm"
Price: 39.31
|
|
| "Trend C153 x 1/2 TCT Two Flute Cutter Worktop 12.7mm x 50mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 17.11
|
|
| "Trend C153D x 1/2 TCT Two Flute Cutter 12.7mm x 50mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 26.94
|
|
| "Trend CASE/1001 Combi 1001 Carry Case" |
"Hard wearing carry case for protecting and carrying the Trend COMBI1001, COMBI1002 and KWJ900."
Price: 36.38
|
|
| "Trend CB38-532 TCT CB Counterbore" |
"The Trend CB counterbore is extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e. g 501/532 to 501/012."
Price: 37.92
|
|
| "Trend Corner Chisel" |
"The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use with hinge and lock jigs."
Price: 12
|
|
| |
|
