|
| |
| "Trend Trend CSB/19060 Craft Saw Blade 190x30mm 60T" |
"This saw blade has been designed with a reamed bore to ensure precise fit to spindle and the silverbraze to ensure tip is bonded securely to body. Laser etched on reverse to European standard EN847-1/2."
Price: 29.76
|
|
| "Trend Trend SNAP/PC/38 Snappy 3/8 Diameter Plug Cutter - 1/4 hex Shank" |
"Trend SNAP/PC/38 Trend Snappy 3/8 diameter plug cutter is made from Tool Steel, allowing longer plugs to be drilled. Plugs are very slightly tapered. Recommended for use with a pillar drill."
Price: 13.15
|
|
| "Trend Trend T46/01X1/4TC - 12.7mm Diameter Trimming Cutter" |
"For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 26.99
|
|
| "Trend Trend CSB/CC30548 Crosscut Craft Saw Blade 305x30mm 48T" |
"This saw blade has been designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness."
Price: 58.96
|
|
| "Trend Trend 'Pro Grabit' Damaged Bolt & Screw Remover" |
"Trend's useful power-drill driven, 2-piece 'Pro Grabit' provides the perfect solution for removing damaged screws & fasteners. Each ingeniously designed 'bit' is double-ended - one 'end' is used as a burnisher to effectively clean out the damaged fastener head. Rotating the 'bit' reveals the 2nd 'end'; by applying steady pressure, this end will 'bite' & tap into the screw head enabling it to be removed."
Price: 19.99
|
|
| "Trend Trend CSB18424A - 24T 'CraftPro' Saw Blade 184mm" |
"Rip cutting hard & soft wood, particle board & stone fibre board"
Price: 29.06
|
|
| "Trend Trend Snappy Snap/SQ/123 - Square Bit Mix Pack of 3" |
"This pack includes: 1 x Robertson No 1 Screwdriver bits 1 x Robertson No 2 Screwdriver bits 1 x Robertson No 3 Screwdriver bits"
Price: 4.85
|
|
| "Trend Trend CSB/16524 Craft Saw Blade 165x30mm 24T" |
"This saw blade has been designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Laser etched on reverse to European standard EN847-1/2."
Price: 28.38
|
|
| "Trend Trend Bradawl WP-HJ09 F" |
"Replacement bradawl only for the Hinge Jig."
Price: 5.72
|
|
| "Trend Trend Snappy Snap/SQ/2 - Square No2 Bit - Pack Of 3" |
"This product includes: 3 x Robertson No 2 Screwdriver bits"
Price: 4.85
|
|
| "Trend CSB18424 - 24T 'CraftPro' Saw Blade 184mm" |
"Rip cutting hard & soft wood, particle board & stone fibre board"
Price: 29.06
|
|
| "Trend Trend CSB/21560 Craft Saw Blade 215x30mm 60T" |
"This saw blade has been designed for a professional finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. Laser etched on reverse to European standard EN847-1/2."
Price: 43.61
|
|
| "Trend Trend T11 VS Plunge Router 1/2"" (230V)" |
"This Heavy duty router has a powerful 230V/2000W variable speed motor. Suitable for routing heavy-duty woodworking applications with a 1/2” shank router cutter. Can be used in a router table and has a fine height adjuster for above and below the table adjustment."
Price: 433.99
|
|
| "Trend Trend CSB/16540T Craft Saw Blade 165x20mm 40T" |
"This saw blade has been designed for a professional finish in soft wood, hard wood,plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness."
Price: 26.98
|
|
| "Trend Trend FT Saw Blade 160x20mm 48T" |
"This blade is laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. Micro-granular carbide tips are used to give long lasting performance in a wide range of materials and to provide the maximum number of resharpenings."
Price: 48.98
|
|
| "Trend Trend 12 Piece Starter Router Cutter Set" |
"This twelve piece cutter set contains a range of the most widely used router cutters for decorative woodworking, providing excellent value for money and is supplied in plastic carry case."
Price: 40.99
|
|
| "Trend Trend CSB/23040 Craft Saw Blade 230x30mm 40T" |
"This saw blade has been designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness."
Price: 40.00
|
|
| "Trend Trend 9.5mm Pocket Hole Drill Bit" |
"This is a replacement pocket hole jig stepped drill bit."
Price: 18.98
|
|
| "Trend Trend CSB23540 - 40T 'CraftPro' Saw Blade 235mm" |
"Rip cutting hard & soft wood, particle board & stone fibre board"
Price: 40.00
|
|
| "Trend Trend CSB/23024 Craft Saw Blade 230x30mm 24T" |
"This saw blade has been designed with a reamed bore to ensure precise fit to spindle and the silverbraze to ensure tip is bonded securely to body. Laser etched on reverse to European standard EN847-1/2."
Price: 37.80
|
|
| "Trend Trend GD/6MM Snappy Glass Drill Bit" |
"This TCT drill bit can be used on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used."
Price: 8.03
|
|
| "Trend Trend CSB/CC25440T Craft Saw Blade 254x30mm 40T" |
"This saw blade has been designed with a reamed bore to ensure precise fit to spindle and the silverbraze to ensure tip is bonded securely to body. Laser etched on reverse to European standard EN847-1/2."
Price: 46.93
|
|
| "Trend Trend Snap/SDA/2 - Snappy Square Drive 3/8x50mm" |
"Square drive with ball locator. Chrome Vanadium steel."
Price: 9.55
|
|
| "Trend Trend CSB/15024 Craft Saw Blade 150x20mm 24T" |
"This saw blade has been designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness."
Price: 24.78
|
|
| "Trend Trend CS/4MMTC Snappy Countersink 4x9.5mm TCT" |
"Heat treated tool steel countersink with a HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only."
Price: 14.54
|
|
| "Trend Trend BSC/0/100 NO.0 Jointing Biscuits (Pack of 100)" |
"A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and accurate jointing of hard & soft woods, plywood and composition board, look no further."
Price: 8.99
|
|
| "Trend Trend CS/12 Snappy Countersink with 9/64 Drill" |
"Heat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only."
Price: 7.50
|
|
| "Trend Trend UNI/CS - Universal Countersink" |
"This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw. Not suitable for production applications and not suitable for ferrous and non-ferrous metals."
Price: 24.78
|
|
| "Trend CSB16524TA - 24T 'CraftPro' Saw Blade 165mm" |
"Anti-kick back saw blade for cordless trim saws"
Price: 28.38
|
|
| |
|
