|
| |
| "Clarke Clarke Panther 10/240 2.5hp 24 Litre Air Compressor" |
"High output direct drive air compressor. Suitable for workshop and DIY applications such as spraying (paint, varnish, preservatives etc.), nailing, stapling, polishing, sanding and garage use. With twin air outlets for increased versatility."
Price: 143.98
|
|
| "Clarke Clarke Panther 10/500 2.5hp 50 Litre Air Compressor" |
"High output direct drive air compressor. Suitable for workshop and DIY applications such as spraying (paint, varnish, preservatives etc.), nailing, stapling, polishing, sanding and garage use. With twin air outlets for increased versatility."
Price: 179.98
|
|
| "Clarke Clarke Bandit 4 - 8 Litre Air Compressor Nailing / Stapling Kit" |
"The Clarke Bandit IV 8 litre portable compressor is ideal for DIY and trade applications such as decking, carpentry, flooring, fencing, panelling, craftwork etc. thanks to its impressive 8 litre capacity, 4.5cfm air displacement and 8bar maximum working pressure. This compact compressor is also ideal for paint spraying, tyre inflation and blowing etc.This great value kit comes complete with not only the quality Bandit IV compressor, it's also supplied with a lightweight, high performance and easy to use Air Nailer/Stapler, perfect for a wide range of applications. The kit also provides users with a recoil hose, fittings and a starter pack of nails and staples, to get you going straight out of the packaging."
Price: 131.98
|
|
| "Clarke Clarke SE46C270 Industrial Air Compressor" |
"The SE46 industrial air compressor has an established reputation for long term reliability & performance and has been manufactured specifically to offer long term service. The solid construction of this highly efficient, slow running, 'V' belt drive unit affords dependable service the world over for a wide range of commercial & industrial users. Specification also includes pre-wired star delta starter (with overload protection & adjustable timer), safety valve, pressure gauge, air outlet valve & drain tap."
Price: 1797.60
|
|
| "Clarke Clarke CXR100 10HP 270 Litre Industrial Screw Compressor" |
"Built to combine total reliability with high performance and minimum energy consumption, this superb range of screw compressors offers state of the art technology at exceptionally keen pricing. Features: Easy Installation • Will fit easily through a 900mm doorway. • Compact design saves on space required. • Construction allows positioning with a pallet truck • Simply connect to air system and electrical supply (all units are fully tested before dispatch) • No need for floor fixing due to vibration free operation Comprehensive Digital Control Panel Constantly monitors: • Air Pressure • Oil temperature • Motor temperature • Condition of all filters • Hours run • Indicates when maintenance is due • Indicates excessive temperature prior to shut-down • Controls on demand mode of operation, continuous or automatic. Easy Maintenance • Removable side panels for full access • Simple screw-on oil cartridge and oil separator filters Low Noise Level: Operates at 67 Db (A) removing the need for a separate enclosure, which maximises flexibility for choice of location. Superb Build Quality: Construction and performance satisfy relevant European standards Technical Features: 1. Large oil separator tank ensures minimal oil carry over (typically as low as 3mg/m3) 2. Minimum pressure valve ensures correct oil pressure & lubrication 3. Thermostatic valve controls oil temperature and prevents condensation developing inside the oil separator tank 4. Suction valve adjusts compressor output 5. Over sized suction filter ensures maximum air intake filtration, thereby reducing maintenance and extending oil and compressor life"
Price: 3238.80
|
|
| "Clarke Clarke CXR150 15HP Industrial Screw Compressor" |
"Built to combine total reliability with high performance and minimum energy consumption, this superb range of screw compressors offers state of the art technology at exceptionally keen pricing. Features: Easy Installation • Will fit easily through a 900mm doorway. • Compact design saves on space required. • Construction allows positioning with a pallet truck • Simply connect to air system and electrical supply (all units are fully tested before dispatch) • No need for floor fixing due to vibration free operation Comprehensive Digital Control Panel Constantly monitors: • Air Pressure • Oil temperature • Motor temperature • Condition of all filters • Hours run • Indicates when maintenance is due • Indicates excessive temperature prior to shut-down • Controls on demand mode of operation, continuous or automatic. Easy Maintenance • Removable side panels for full access • Simple screw-on oil cartridge and oil separator filters Low Noise Level: Operates at 69 Db (A) removing the need for a separate enclosure, which maximises flexibility for choice of location. Superb Build Quality: Construction and performance satisfy relevant European standards Technical Features: 1. Large oil separator tank ensures minimal oil carry over (typically as low as 3mg/m3) 2. Minimum pressure valve ensures correct oil pressure & lubrication 3. Thermostatic valve controls oil temperature and prevents condensation developing inside the oil separator tank 4. Suction valve adjusts compressor output 5. Over sized suction filter ensures maximum air intake filtration, thereby reducing maintenance and extending oil and compressor life"
Price: 3738.00
|
|
| "Clarke Clarke CXR200 20HP Industrial Screw Compressor" |
"Built to combine total reliability with high performance and minimum energy consumption, this superb range of screw compressors offers state of the art technology at exceptionally keen pricing. Features: Easy Installation • Will fit easily through a 900mm doorway. • Compact design saves on space required. • Construction allows positioning with a pallet truck • Simply connect to air system and electrical supply (all units are fully tested before dispatch) • No need for floor fixing due to vibration free operation Comprehensive Digital Control Panel Constantly monitors: • Air Pressure • Oil temperature • Motor temperature • Condition of all filters • Hours run • Indicates when maintenance is due • Indicates excessive temperature prior to shut-down • Controls on demand mode of operation, continuous or automatic. Easy Maintenance • Removable side panels for full access • Simple screw-on oil cartridge and oil separator filters Low Noise Level: Operates at 69 Db (A) removing the need for a separate enclosure, which maximises flexibility for choice of location. Superb Build Quality: Construction and performance satisfy relevant European standards Technical Features: 1. Large oil separator tank ensures minimal oil carry over (typically as low as 3mg/m3) 2. Minimum pressure valve ensures correct oil pressure & lubrication 3. Thermostatic valve controls oil temperature and prevents condensation developing inside the oil separator tank 4. Suction valve adjusts compressor output 5. Over sized suction filter ensures maximum air intake filtration, thereby reducing maintenance and extending oil and compressor life"
Price: 3838.80
|
|
| "Clarke Clarke Rubber Airline Hose - 8mm, 30 metre - RH30" |
"Rubber airline hose with abrasion and oil resistant outer cover"
Price: 27.59
|
|
| "Clarke Clarke CAF018 Air Filter 0.1micron" |
"A high efficiency air filter with maximum 16bar operating pressure, ideal for use with Clarke's range of vertical air compressors, refrigerant dryers and industrial screw compressors. Easy to install and featuring removable cartridges, this 0.1micron filter is suitable for a wide range of water based painting applications."
Price: 178.80
|
|
| "Clarke Clarke CAF030 Air Filter 0.1micron" |
"A high efficiency air filter with maximum 16bar operating pressure, ideal for use with Clarke's range of vertical air compressors, refrigerant dryers and industrial screw compressors. Easy to install and featuring removable cartridges, this 0.1micron filter is suitable for a wide range of water based painting applications."
Price: 178.80
|
|
| "Clarke Clarke CAF010 Air Filter 0.1micron" |
"A high efficiency air filter with maximum 16bar operating pressure, ideal for use with Clarke's range of vertical air compressors, refrigerant dryers and industrial screw compressors. Easy to install and featuring removable cartridges, this 0.1micron filter is suitable for a wide range of water based painting applications."
Price: 166.80
|
|
| "Clarke Clarke CAF007 Air Filter 0.1micron" |
"A high efficiency air filter with maximum 16bar operating pressure, ideal for use with Clarke's range of vertical air compressors, refrigerant dryers and industrial screw compressors. Easy to install and featuring removable cartridges, this 0.1micron filter is suitable for a wide range of water based painting applications."
Price: 142.80
|
|
| "Clarke Clarke 500LTV Vertical Air Receiver" |
"A top quality vertical air receiver from Clarke, manufactured for use with Clarke's range of industrial screw compressors, refrigerant dryers and other air powered tools and equipment. Including multiple outlets at the top, base and sides. Manufactured to 2009/105/EC standards. Complete with a pressure gauge and safety valve.Note: Image for illustration purposes only. Size of receiver may vary. Please refer to product details."
Price: 646.80
|
|
| "Clarke Clarke CAT59 Recoil Air Hose (50ft)" |
"Professional recoil air hose, 50 ft (15.24M) length."
Price: 9.59
|
|
| "Clarke Female Quick Release 'Snap' Coupling ¼""" |
"An essential ¼" BSP threaded air line connecting component. It screws onto your air compressors outlet (or its' filter / regulator outlet) to facilitate a quick, secure and virtually air-tight connection between the air tool & air hose (when, of course, the hose fitted with a suitably BSP threaded snap coupling) to establishes a secure, positive and quick to use connection to the air line."
Price: 3.59
|
|
| "Clarke Clarke Hose Connector (3/8"" Nut x 3/8"" Tail)" |
"A quality hose connector from Clarke."
Price: 1.07
|
|
| "Clarke Clarke Kit 600 - 3 Piece Air Tool Kit" |
"Three popular airline accessories to suit virtually any air compressor."
Price: 17.99
|
|
| "Clarke Clarke Air Die Grinder Set - CAT36B" |
"This air powered set includes 10 aluminium oxide grinding stones and 1/8"" & ¼"" collets"
Price: 29.99
|
|
| "Clarke Clarke Air Angle Die Grinder Set - CAT65" |
"Angled head allows access to difficult to reach areas"
Price: 47.98
|
|
| "Clarke Clarke DIY Multi Sander Kit - CAT86" |
"A DIY air sander kit for a wide range of applications.Download Product Manual"
Price: 68.39
|
|
| "Clarke Clarke Air Hammer Kit - CAT95" |
"Powerful percussion from this superb air hammer. Using a selection of the 6 chisels supplied makes quick work of many jobs requiring hammer action especially in confined locations. Ideal for cutting metal sheet, removing stubborn fittings and minor demolition work."
Price: 27.59
|
|
| "Clarke Clarke ½"" Air Impact Wrench Kit - CAT96" |
"A popular twelve piece kit for the rapid removal and refitting of machine nuts up to 27mm. Ideal for wheel nuts, engines, gear boxes, transmission, construction projects etc. Great value."
Price: 56.39
|
|
| "Clarke Clarke High Speed Air Sabre Saw - CAT97" |
"A compact, high speed reciprocating saw designed for cutting through metal, plastic and other sheet materials. Especially handy for use in confined locations. Ideal for automotive body panels, exhaust systems etc."
Price: 59.98
|
|
| "Clarke Clarke CAT109 3/8"" Reversible Air Ratchet" |
"A versatile, reversible tool ideal for automotive and workshop use. Includes a rubberised comfort grip."
Price: 27.59
|
|
| "Clarke Clarke CAT113 3"" Cut-Off Tool" |
"A versatile tool especially designed for cutting auto body panels, light sheet metal plus exhaust, silencer or radiator hose clamps and nuts & bolts. Fitted with a metal safety guard and a throttle safety device to prevent accidental operation. Includes a rubberised comfort grip."
Price: 22.79
|
|
| "Clarke Clarke CAT116 3/8"" Air Drill" |
"A versatile, low maintenance tool."
Price: 26.39
|
|
| "Clarke Clarke CAT117 1/2"" 17 piece Impact Wrench Set" |
"Heavy duty impact wrench, suitable for garage, tyre shop and workshop applications. Built-in 4 position power regulator and simple push button forward/reverse mechanism. Comes with 10 chrome vanadium impact sockets, a 125mm (5") extension bar and in-line lubricator."
Price: 41.99
|
|
| "Clarke Clarke CIS12/10 1/2"" drive Metric Impact Socket Set" |
"High quality chrome vanadium ½” square drive impact sockets."
Price: 14.39
|
|
| "Clarke Clarke CAT121 Dual Action Air Sander" |
"Random orbital action with adjustable air flow. Gives a smooth, virtually scratch free finish on a variety of surfaces."
Price: 29.99
|
|
| |
|
