|
| |
| "DEWALT SDS Max Steel Point 300mm" |
"The DEWALT SDS Max steel points have toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment for consistently tough, long life chisels and have a sharp pointed end."
Price: 12.42
|
|
| "DEWALT SDS Max Steel Flat 25 x 400mm" |
"The DEWALT SDS Max steel flat chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long life and have a flat end."
Price: 14.6
|
|
| "DEWALT SDS Max Steel Flat 50mm Length 360mm" |
"The DEWALT SDS Max steel flat chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long life and have a flat end."
Price: 19.55
|
|
| "DEWALT DW088K 2 Way Self-Levelling Line Laser" |
"The DEWALT DW088K 2 Way Self-Levelling Line Laser is accurate to ±0. 3mm/m in levelling applications. Self-levelling up to 4° surface angle with automatic out of level indication. It uses a simple 2 button operation with a low battery indication for ease of use. The built-in magnetic pivot bracket mounts easily on metal surfaces, whilst the over moulded housing and thick glass protects the tool and helps maintain calibration under jobsite conditions. The included kit box helps to protect the unit and helps maintain calibration when stored in gang box. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 3 x AA Batteries. DW088K: Laser ONLY. DW088KD: Laser & Detector."
Price: 176.93
|
|
| "DEWALT DW089K 3 Way Self-Levelling Multi Line Laser" |
"The DEWALT DW089K is a 3 Way Self-Levelling Multi Line Laser used for marking Horizontal, Vertical and Side Lines. With overmoulded housing which helps maintain calibration under jobsite conditions. an adjustment dial for fine line movement (vertical & side) with built in magnetic pivot bracket mounts easily on metal surfaces. The 3 button operation and low battery indication allows for ease of use and is accurate to ±0. 3 mm/m in levelling applications with self-levelling up to 4 degrees surface angle with automatic out of level indication, marks a levelled line in seconds. Can be used for a variety of applications: acoustical drop ceilings, cabinet installation, chair rail installation, electrical outlet installation, interior trim carpentry, raised flooring installation, and bathroom and kitchen tiling installation. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case & 4 x AA Batteries. Specification Level Accuracy ±0. 3 mm/m. Working Range: 15m Indoor (up to 50m with DE0892).Power: 4 x AA Batteries (Supplied).Laser Class: 2"
Price: 336.92
|
|
| "Dewalt Toughsystem™ Toolbox" |
"The DEWALT TOUGHSYSTEM™ Toolbox is a mobile modular storage system that allows you to quickly and easily change the combination of tools you take to work. Manufactured from 4mm thick reinforced outer casing with metal fastening straps and padlock eyes for lockable security. They are dust tight and water jet resistant. Three options are available - a toolbox/organiser for tools and small parts, a large toolbox for general use and a deeper tool chest for larger power tools. DS150: Dimensions Wx Hx D: 550 x 336 x 158mm DS300: Dimensions Wx Hx D: 550 x 336 x 308mm DS400: Dimensions Wx Hx D: 550 x 366 x 408mm"
Price: 67.36
|
|
| "DEWALT DW292 1/2in Drive Impact Wrench" |
"DEWALT DW292 Professional Impact Wrench 1/2in has 440Nm of deliverable torque in forward and reverse. Higher torque and faster speed increases productivity. Has a soft grip handle to reduce vibrations and to enhance user comfort. Also has a robust design for increased durability. Supplied with a 1/2 inch ring retainer. Specification Bit Holder: 1/2in Square. Input Power: 710 Watt. No Load Speed: 2, 200/min. Impact Rate: 2, 700/min. Max Torque: 440Nm. Bolt Capacity: M20. Length: 292mm. Height: 216mm. Weight: 3. 2kg."
Price: 363.07
|
|
| "DEWALT DW311K Reciprocating Saw" |
"DEWALT DW311KL Reciprocating Saw Orbital Action has a 1200 Watt motor for heavy-duty applications, variable speed, keyless stainless steel blade change, keyless adjustable shoe easily adjusts the depth of cut and 0-2, 600 strokes per minute and a 28 mm stroke length for fast cutting. Applications: Cutting steel pipes, aerated concrete blocks, pallets with nails in, plunge cutting, pipes and metal sections and ideal for pruning trees/fire wood. Comes with 2 professional bi-metal blades, and a heavy-duty carrying case. Specification Input Power: 1, 200 Watt. Strokes at No Load: 0-2, 600/min. Stroke Length: 28mm. Capacity: Wood: 300mm, Pipe: 130mm, PVC: 160mm. Weight: 4. 0kg."
Price: 363.07
|
|
| "DEWALT DW331K Heavy-Duty Jigsaw" |
"The DEWALT DW331K Heavy-Duty Jigsaw has a rugged motor and full variable speed control, delivering fast cutting action of up to 3, 100/min. With a tapered saw blade roller that controls the blade deflection at maximum depth of cut. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Fitted with full wave electronic speed control with feedback that ensures the blade speed is maintained under any load, for a consistent finish across all materials. The patented anti-vibration counterbalance mechanism and rubber grip provide smooth operation and reduced fatigue over long periods. The quick and easy patented keyless blade change system accepts T- shank blades and a tool free adjustable shoe. That has an anti scratch cover, capable of bevels up to 45° in both directions. Its modular component design provides trouble free servicing and there is a switchable dust blower that keeps the cut line clear and free from debris. Specification Input Power: 701W. Strokes at No Load: 0-3, 100/min. Stroke Length: 26mm, Bevel Capacity: 45°.Capacity: Wood: 130mm, Steel: 12mm, Non Ferrous Metal: 30mm. Weight: 2. 8kg."
Price: 198.46
|
|
| "DEWALT DW625EKT Double Collet Router" |
"The DW625EKT Double Collet Router has electronic speed control that ensures that the same fine finish is achieved in all grades of timber, aluminium and plastics since the full wave electronic control ensures the selected speed is maintained under any load. The soft start eliminates small initial movements that might misalign the cutter, especially important with such a powerful router. Routing depth setting with fine adjustment and magnified scale for simple setting. The two column precision guide has large phosphor bronze bushes for plunging accuracy. These are set in a high quality die cast aluminium housing so that carefully controlled plunge cuts can be made. It has a spindle lock mechanism for quick and easy cutter changes with a single spanner and a compact low profile design that provides easy handling and increases stability. The router is fitter with large comfortable handles with the on/off switch and plunge lock at your finger tips for excellent control and there is a dust extraction through the base mounted spout for virtually dust free routing. The 3 stage depth stop adjustment enables recesses of various depths to be machined in one operation without time consuming setting up. Supplied with: 1 x Parallel Fence With Fine Adjustment, 1 x Dust Extraction Adapter, 1 x 6. 35mm Guide Brush, 1 x 12. 7mm Guide Brush, 1 x Spanner and 1 x T-Stak Case. Specification Input Power: 2, 000WNo Load Speed: 8, 000-20, 000/min. Collet: 6-12. 7mm (1/4-1/2in) Plunge Depth: 80mm Max. Cutter Diameter: 50mm Weight: 5. 1kg"
Price: 360
|
|
| "Dewalt DW680K Planer" |
"The DEWALT DW680K Planer has a large planer blade drum that rotates at high speed providing an excellent finish. With a low weight design and perfect balance making it ideal for single handed use in awkward applications. The front handle depth control is clearly marked in 0. 1mm steps for accurate setting with a positive stop position. It also offers 3 different size chamfering grooves in the front shoe simplify precision fitting jobs. The rubber coated front handle eliminates slipping for greater comfort and control. Supplied with: 1 x Heavy-Duty Carrying Case, 1 x Parallel Fence & 1 x Dust Extraction Adaptor. Specification Input Power: 600WNo Load Speed: 15, 000/min. Cutting Depth: 0-2. 5mm, Rebate Depth: 12mm Planer Width: 82mm Weight: 3. 2kg"
Price: 213.85
|
|
| "DEWALT DW682K Biscuit Jointer" |
"The DEWALT DW682K Biscuit Jointer uses a rack and pinion control, that provides precise vertical adjustment and fence alignment. With pre-set cutting depths for 0, 10 and 20 biscuit sizes and additional fine adjustment for ultimate accuracy. The mitre fence remains attached in all applications for simple use and the spindle lock mechanism provides quick and easy blade changes with a single spanner. There is also anti slide grippers, eight guiding notches and a fence window to increase cutting accuracy. Supplied with: 1 x Tungsten Carbide Tipped Grooving Cutter, 1 x Shavings Bag, 1 x Spanner, 1 x 35mm Dust Extraction Spout and 1 x Heavy-Duty Carrying Case. Specification Input Power: 600WNo Load Speed: 10, 000/min. Cutter Diameter: 100mm Max. Cutting Depth: 20mm Joint Groover Setting: 4mm Fence Adjustment: 0°-90°Weight: 3. 0kg"
Price: 290.77
|
|
| "DEWALT DW872 Metalica Chopsaw" |
"DEWALT DW872 Metalica Chopsaw has a high power 2200 Watt motor with electronic soft start for metal cutting. The 25. 4 mm arbor fitment takes a variety of metal saw blades, whilst the large tool-free pivoting fence for parallel and mitre cuts up to 45°. Robust cool-running 355 mm, 70 tooth tungsten carbide tipped blade which also gives burr-free cuts at constant cutting depth throughout the life of the blade. The quick retracting guard that gives increased visibility. The ergonomically designed horizontal handle gives greater comfort and the vertical clamping system allows for greater safety. Extra wide steel base gives a larger working area and increased stability and features a easy-handling transport lock-mode. Specification Input Power: 2, 200 Watt. No Load Speed: 1, 300/min. Max. Cutting Capacity at 90 ° Square Profile 100 x 100 mm. Max. Cutting Capacity at 90 ° Rectangular Profile 75 x 130 mm. Max. Cutting Capacity at 90 ° Rounded Profile 130 mm. Max. Cutting Capacity at 90 ° L Shape Profile92 x 92 mm. Max Cutting Capacity at 45° Square Profile79 x 79 mm. Max Cutting Capacity at 45° Rectangular Profile79 x 123 mm. Max Cutting Capacity at 45° L Shaped Profile56 x 56 mm. Max Cutting Capacity at 45° Rounded Profile 79 mm. Weight: 22. 5kg."
Price: 569.23
|
|
| "DEWALT Apprentice Nubuck Hiker Boots" |
"The DEWALT Apprentice Hiker Boots have Nubuck and full grain leather uppers which are hardwearing with anti-bacterial insole with dual density seat. They are fitted with a steel toecap that has been tested to 200 Joules. The sole is chemical and oil resistant and is made from EVA rubber. Available in Wheat or Brown. EN Test: CE EN ISO 20345-2011. Safety Rating: SB. Slip Rating: SRA."
Price: 70.18
|
|
| "DEWALT Challenger 3 Sympatex Safety Boots" |
"The DEWALT Challenger 3 Sympatex Waterproof Hiker Boots have a full grain nubuck leather upper with a Sympatex waterproof and breathable membrane. The TPU sole is resistant to petrol, chemical’s, oil and temperatures up to 120°C. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toe cap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection and a dual density anti-bacterial insole. Available in Black or Brown. EN Test: CE EN ISO 20345-2011. Safety Rating: S3-WR. Slip Rating: SRA."
Price: 96.14
|
|
| "DEWALT Cheverley Lightweight Shorts" |
"The DEWALT Cheverley Shorts have a durable, rip-stop fabric base, double folded hem and double stitched seams for increased durability and wear. Fitted with a zip fly and top button. It features a variety or reinforced holster, cargo and back pockets. There is also several holster style pockets, enabling you to keep in use tools close to hand. Material Composition: 65% Polyester, 35% Rip-Stop Cotton."
Price: 30.46
|
|
| "DEWALT Cutter Safety Trainers" |
"The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toe cap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011. Safety Rating: SB. Slip Rating: SRA."
Price: 70.37
|
|
| "DEWALT Cyclone Hoody" |
"The DEWALT Cyclone Hoody is a warm garment for those colder days at work. It has a three piece hood construction with a flat draw-cord and two individual front pockets. The side panels have eyelet holes for ventilation. The design features DEWALT logos on the left breast and neck with a guaranteed tough logo to the right arm. Material Composition: 65% Polyester, 35% Cotton. Available in Sizes Medium -XX Large."
Price: 29.74
|
|
| "DEWALT D21570K Dry Diamond Drill" |
"The DEWALT D21570K Dry Diamond Drill has a new motor which gives improved performance in applications with dry core bits up to 127mmn in bricks or soft masonry. The electronics provide e-clutch, power-up and overload protection and the two speed gearbox for increased versatility when drilling in wood, metal and concrete with standard drill bits. The electro-Mechanical clutch increases user control and protection and the heavy-duty 16mm steel chuck allows quick bit change whilst offering excellent bit retention. It has a innovative mode selection collar which allows intuitive control for optimal performance. Standard Equipment: Multi-Position side handle, Depth Stop, and Heavy-duty Carrying Case. Specification Chuck: 16mm Keyed Spindle Thread: 1/2in x 20 UNFInput Power: 1, 300 Watt. Power Output: 680 Watt. No Load Speed: 0-1, 250/0-3, 500/min. Capacity: Core (Brick/Maonry): 127mm Collar Diameter: 43mm. Length 380mm. Height 215mm. Weight: 3. 0kg."
Price: 229.24
|
|
| "DEWALT D21580K Dry Diamond Drill" |
"DEWALT D21580K Dry Diamond Drill 2 Speed is the ideal tool for electrical, plumbing or HVAC applications when drilling only into masonry and bricks. Quick and accurate core drilling into brick and masonry up to 152 mm. Has a two speed gearbox with mechanical clutch for added user protection. Features overload and thermal protection increase the life of the tool. Lock on button for continuous operation when drilling with a stand. Has a large and comfortable side handle for enhanced user comfort, also a larger rear handle allows to work while wearing gloves. Standard equipment: Multi-position side handle, and a heavy-duty carrying case. Specification Chuck: 1/2in Male BSP. Input Power: 1, 705 Watt. No Load Speed: 0-1, 100/0-2, 350/min. Output Power: 1150 Watt. Drilling Capacity: Core (Brick/Masonry): 152mm Collar Diameter: 53mm. Length: 480mm. Height: 165mm. Weight: 5. 4kg."
Price: 829.24
|
|
| "DEWALT DW23700 Circular Saw" |
"DEWALT DW23700 professional Circular Saw with a high power, durable motor delivers excellent power even at maximum depth of cut. It has optimum balance for safe, fatigue-free operation, an additional handle for safe two-handed work. It also has a steel shoe for added durability, a stable block construction for low vibration running and long service life, protection hood for sawdust extraction, spindle lock for ease of blade change and variable adjustment of the mitre angle to 45° for added versatility. Supplied with: 1 x Precision 24 Tooth TCT Saw Blade, 1 x Rip Fence and 1 x Blade Spanner. Specification Input Power: 1, 750 Watt. No Load Speed: 4, 700/min. Max Cutting Depth:@90°: 86mm, @45°: 62mm. Blade: 235x30mm Bore, 24 Tooth TCT. Bevel Capacity: 45 °. Weight: 8. 2kg."
Price: 378.46
|
|
| "DEWALT D25033K SDS Plus Hammer Drill" |
"The DEWALT D25033K SDS Plus 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components, resulting in better durability. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It also features electronic variable speed for total control in any application. Its rounded ergonomic industrial design allows easy and comfortable handling in any application. Supplied with: 1 x Multi-Position Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case. Specification Mode: Rotary, SDS Hammer, Chisel Only. Input Power: 710 Watt. No Load Speed: 0-1, 550/min. Impact Rate: 0-5, 680/bpm, 2. 0 Joules. Capacity: Wood: 30mm, Steel: 13mm, Concrete 22mm, Core: 50mm. Toolholder: SDS. Weight: 2. 5kg."
Price: 130.76
|
|
| "Dewalt D25414KT Sds Plus Multi Drill" |
"DEWALT D25414KT 32mm SDS Plus Multi Drill with active vibration control has a floating back handle that delivers extremely low vibration and more comfort. The quick change 3 jawed chuck provides speed, precision and flexibility when drilling in wood, ceramic and steel. Optimised power to weight ratio allows for a good power, even in a lightweight package. Rotation-stop provides light chiseling applications, render and tile removal. Ideal for drilling large anchors, fixings and through holes in concrete and masonry from 6 to 32mm in diameter. The large hammer mechanism construction guarantees longer tool life and superior performance. Comes supplied with: Quick release SDS Plus removeable tool holder, quick release 3 jaw removeable chuck, Multi-position side handle and a heavy-duty TSTAK Box. Specification Mode: Rotary, SDS Hammer and Chisel. Input Power: 1, 000 Watt. No Load Speed: 0-820/min. Impact Rate: 0-4, 700/bpm with 4. 2 Joules. Capacity: Wood: 32mm, Steel 16mm, Concrete: 6-32mm, Core: 100mm. Weight: 4. 3kg."
Price: 675.38
|
|
| "DEWALT D25501K SDS Max Combination Hammer" |
"The DEWALT D25501K Compact 2 Mode SDS Max Combination Hammer Drill boasts an excellent power to weight ratio of 11 Joules of impact energy delivered by a 6. 1kg hammer, rotation-stop for medium-light demolition applications and has a unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life. The hammer mechanism is optimised by reducing the number of components and by improving dampening to deliver maximum impact energy. The efficient mechanism delivers impact blows directly to the bit without losses through excessive vibration and rebound dampening reduces stress to the tool and the soft rubber grip handles improve user comfort lowering fatigue during extended use. The chain drive improves durability and increases efficiency together with an oil filled gearbox to ensure total component lubrication and superior heat dissipation with an ergonomic, compact and slim line design maximises control and offers easy access to confined spaces. Supplied with: 1 x Multi-Position Side Handle with Depth Stop, 1 x Heavy-Duty Carrying Case. Specification Modes: Rotary, SDS Hammer. Input Power: 1, 100 Watt. No Load Speed: 400/min. Impact Rate: 2, 740/bpm with 8 Joules. Capacity: Concrete 40mm, Breakthrough Bit: 55mm, Core Bit: 90mm. Tool Holder: SDS-Max. Length: 457mm, Height 245mm, Width 104mm. Weight: 6. 15kg."
Price: 596.93
|
|
| "DEWALT D25601K SDS Max Combination Hammer" |
"The DEWALT D25601K SDS-Max Combination Hammer is ideal for drilling anchor fixing and through holes in concrete and masonry. Its chain drive improves durability and increases efficiency together with an oil filled gearbox to ensure total component lubrication and superior heat dissipation and its ergonomic, compact and slim line design maximises control and offers easy access to confined spaces. Incorporates Active Vibration Control system with a floating rear handle and damped side handle to reduce vibration plus a rotation-stop facility for medium-light demolition applications. Its unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life and the hammer mechanism is optimised by reducing the number of components and by improving dampening to deliver maximum impact energy and therefore the efficiency to drill into the hardest concrete. The efficient mechanism delivers impact blows directly to the bit without losses through excessive vibration and rebound dampening reduces stress to the tool and the electronic variable impact energy/speed for total control with smaller bits and light material with the lock-on switch for greater control when in chipping mode. Excellent power to weight ratio: 12 Joules of impact energy delivered by a 6. 8 kg hammer. Supplied with: 1 x Multi-Position Side Handle with Depth Stop, 1 x Heavy-Duty Carrying Case. Specification Modes: Rotary, SDS Hammer. Input Power: 1, 250 Watt. No Load Speed: 210-415/Min. Impact Rate: 1, 430/2, 840/bpm with 2. 8 Joules. Capacity: Concrete: 45mm, Core: 110mm. Weight: 6. 8kg. Tool Holder: SDS-Max. Length: 477mm, Height: 245mm, Width: 104mm. Weight 6. 8kg."
Price: 675.38
|
|
| "DEWALT D25810K SDS Max Chipping Combination Hammer" |
"The DEWALT D25810K SDS Max Chipping Combination Hammer has a powerful brushed motor for high performance even in demanding applications. Low vibration ensures maximum trigger time and also reduces user fatigue. Fitted with a soft, rubber anti-vibration handle. It has an ergonomic, compact and slim design which offers easy access to confined spaces. There's a chisel angle option which is easy to activate and use. Specification Modes: Hammer/Chisel. Input Power: 1050 Watt. Impact Rate: 3, 150/bpm. Impact Energy: 7. 1 Joules. Weight: 5. 6kg."
Price: 460
|
|
| "DEWALT D25899K SDS Max Demolition Hammer" |
"The DEWALT D25899K SDS Max Demolition Hammer (10kg class) is a powerful yet lightweight Breaker with in-line design for better handling and quick-change chisel adjustment for fast orientation of the chisel through 12 preset positions. The large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance. Its ergonomic inline design ensures user comfort during any application. Whilst its compact, streamlined design allows access in confined areas. In line design for better handling and quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions Modular design allows for quick access to key components allowing for faster and cheaper servicing. 1500 Watt, 95 mm motor delivers outstanding motor efficiency and durability, magnesium housings ensure maximum durability and minimum weight. Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application. Supplied with: 1 x Multi Position Side Handle and 1 x Heavy-Duty Carrying Case. Specification Input Power: 1, 500 Watt. Impact Rate: 1, 020-2, 040/bpm, 17. 5 Joules. Chuck: SDS Max. Length: 650mm. Height 250mm. Weight 9. 6kg."
Price: 767.69
|
|
| "DEWALT D25902K SDS Max Demolition Hammer" |
"DEWALT D25902K 10Kg SDS Max Demolition Hammer has a powerful and durable 1, 550 Watt motor which delivers outstanding concrete breaking performance, with Active Vibration Control system. It incorporates a counterbalance mass and a floating handle delivers extremely low vibration. Its in-line design makes for better handling and its quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions. Its magnesium housings ensure maximum durability and minimum weight. Its compact size allows for work to be completed in confined areas. The large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance. Supplied with: 1 x Multi Position Side Handle, 1 x Chisel Bit and 1 x Heavy-Duty Carrying Case. Specification Mode: Chisel Only. Input Power: 1, 550 Watt. Impact Rate: 1, 050-2, 100/bpm, 19 Joules. Tool Holder: SDS Max. Weight: 10. 5kg."
Price: 938.46
|
|
| "DEWALT D26200 Compact Fixed Base Router" |
"The DEWALT D26200 is a 1/4 inch (8mm) compact router with full wave electronic speed control with feedback which ensures the selected speed is maintained under any load for a consistent finish in all grades of timber, aluminium and plastics. It has variable speed control (16, 000 to 27, 000/Min) this enables router bit to be optimised for application. It has a depth ring and clamping mechanism which combine to ensure motor remains accurate, the aluminium motor housing and base construction provides long term durability with the large 100mm D-Base design to allow the user maximum router support on the work piece. The dual LED lights increase visibility around the router bit during operation for increased accuracy and the multiple spindle lock detents enables quick and simple router bit changes. Supplied with: Parallel fence, Dust extraction adaptor, 8mm collet (1/4in), 17mm spanner. Specification Input Power: 900WNo Load Speed: 8, 000-27, 000/min. Collet: 6/8mm (1/4in) Plunge Depth: 55mm Max. Cutter Diameter: 36mm Weight: 1. 9kg"
Price: 221.54
|
|
| |
|
