|
| |
| "Clarke 90° Tee with Soot Box Flue Pipe 6""" |
"Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards."
Price: 71.98
|
|
| "Clarke 45 Degree Elbow Flue Pipe 5""" |
"Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards."
Price: 34.79
|
|
| "Clarke 45 Degree Elbow Flue Pipe 6""" |
"Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards."
Price: 38.39
|
|
| "Clarke 45 Degree Elbow with Door Flue Pipe 6""" |
"Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards."
Price: 51.59
|
|
| "Clarke 75mm x 117mm Slotted Flue Connector" |
"Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards."
Price: 17.99
|
|
| "Clarke 6"" Aluminium Adjustable Roof Plate, 25-45 Degree" |
"This adjustable Roof Plate (Flashing) is designed to be installed under your roof slates or tiles to help maintain a weatheproof seal around the flue. Should be used in conjunction with a Storm Collar to complete the installation."
Price: 41.99
|
|
| "Clarke 6"" Stainless Steel Internal Wall Support" |
"This intermediate wall support is designed for use as a load bearing support from a non-combustable wall. It is supplied complete with a support plate and collar."
Price: 130.80
|
|
| "Clarke 6"" Stainless Steel Wall Bracket 50-100mm Adjustable" |
"This adjustable Wall band is used to provide lateral support for a vertical flue, giving between 50mm -100mm clearance from a non-combustable wall."
Price: 39.59
|
|
| "Clarke Rafter Support Bracket" |
"Rafter support brackets maintain a 50mm clearance from combustable materials andprovide lateral support."
Price: 57.59
|
|
| "Clarke 6"" Ventilated Combustible Floor Support Plate" |
"This load bearing Ventilated Support Plate is supplied complete with a support collar and is designed for use where the flue system penetrates a combustable floor. a load bearing support plate must be fitted to every 6 metre run of flue pipe."
Price: 107.98
|
|
| "Clarke Ventilator Cowl Adaptor To Fit Twin Wall Pipe" |
"This adaptor is essential for connecting spinning ventilator cowl and twin wall pipe together safely, correctly and securely when installing a wood burning/multifuel stove."
Price: 71.98
|
|
| "Clarke 6"" Twin Wall Standard Cowl" |
"A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. IMPORTANT: Your stove must have a minimum of a 1 metre vitreous flue pipe between the stove and the stainless steel twin wall system."
Price: 63.59
|
|
| "Clarke 5"" to 6"" Appliance Connector Vitreous to Stainless" |
"A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter. "
Price: 34.79
|
|
| "Clarke Clarke Grate for Boxwood Cast Iron Stove" |
"Optional heavy duty grate made from cast iron."
Price: 32.39
|
|
| "Clarke Clarke Grate for Boxwood Deluxe Cast Iron Stove" |
"Optional heavy duty grate made from cast iron."
Price: 39.59
|
|
| "Clarke Clarke SP5 Heat Resistant Stove Paint - Matt Black (500ml)" |
"High quality paint, heat resistant to 650ºC. Ideal for the decoration and protection of stoves, Chimineas, fire place surrounds, fire baskets / grates, BBQ’s, storage tanks, flue pipes etc. Suitable for use on cast iron, ferrous metal, steel, brick, concrete and similar surfaces."
Price: 17.99
|
|
| "Clarke Clarke 'Berkeley' Cast Iron Fireplace" |
"The Berkeley cast iron fireplace adds a welcoming focal point to your home and is available with a choice of (optional) tile sets to blend in with any decor. Alternatively, you can insert your own choice of tile."
Price: 299.00
|
|
| "Clarke 80-250mm Spinning Ventilator Cowl" |
"A highly efficient, easy to install spinning ventilator cowl complete with two fixing kits to suit the needs of every user. Manufactured from strong and lightweight aluminium and stainless steel, this cowl features aerodynamic legs that allow for a great flow of gases through a larger area for superior performance.Please Note: Must be purchased with ventilator cowl adaptor to fit the twin wall flue pipe (Order code: 090322280)"
Price: 143.98
|
|
| "Clarke Clarke Malvern 6.2kW Steel Wood Burning Stove" |
"The Malvern steel wood burning stove is the ideal focal point for the smaller room. This stylish steel stove creates warmth and ambience in any setting. The heat output of 6.2kW belies its size, the Malvern's steel construction allows for quicker generation of heat, with the adjustable control to alter the burn rate and heat output making it more efficient.It is recommended that a carbon monoxide detector (available here) is installed in accordance with BS EN 50292:2002"
Price: 322.80
|
|
| "Clarke Clarke CCIFB Cast Iron Fire Basket with Bronze Caps" |
"Decorative open fire basket with bronze fittings provides a focal point in your fire place."
Price: 83.98
|
|
| "Clarke 6"" Stainless Steel Wall Band" |
"This Wall band is used to provide lateral support for a vertical flue, giving 50mm clearance from a non-combustable wall."
Price: 23.98
|
|
| "Clarke 6"" Stainless Steel Twin Wall Flue 1000mm" |
"A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter. "
Price: 107.98
|
|
| "Clarke 6"" Stainless Steel Twin Wall Flue 500mm" |
"A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter. "
Price: 63.59
|
|
| "Clarke 6"" Stainless Steel Twin Wall Flue 30° Elbow" |
"A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter. "
Price: 83.98
|
|
| "Clarke Clarke 'Cheltenham' Cast Iron Fireplace" |
"Create that truly traditional look for you living space. This beautifully crafted cast iron fire place continues the 'Wessex' theme for our wonderful fires; in fact it's so faithfully authetic you could almost imagine Thomas Hardy himself warming cold hands & feet by it's cosy & comforting glow."
Price: 334.80
|
|
| "Clarke Clarke Junior Victoria II Cast Iron Wood Burning Stove" |
"The classically designed Junior Victoria II multi fuel stove / wood burning stove adds a sense of timeless style to any modern or period room. Suitable for burning wood and coal, this cast iron stove is as efficient as it is stylish, providing up to 7kW of heat and a welcoming glow that only real flame can provide.Manufactured from durable, yet elegant cast iron, the Junior Victoria II is built to last and complies with the BS/En13240 and CE latest standards. Coated with black, hardwearing heat resistant paint the Junior Victoria II multi fuel stove benefits from a contemporary finish that will look great year after year.The Junior Victoria II wood burning stove features a clever air wash system that ensures the high quality heat resistant glass front stays clear of ash and soot, plus a simple to use pull handle system for riddling the grate and transporting soot and ash into the ash pan below. The Junior Victoria II multi fuel stove is easy to use and requires little maintenance, so you get all the benefits of a consistent, reliable heat source, with minimum fuss.Featuring an ergonomic handle fitted to the ash pan access door for safe, comfortable ash removal, tactile locking door handle, 2 precise, screw adjustable air controls for adjusting the burn rate and temperature and smoke outlet mounted at the top of the stove for easier installation.This multi-fuel / wood burning stove makes a truly great addition to any home, stylish, purposeful and a real conversation piece.Please note - This stove requires a flexible flue liner with a diameter of 6"".Main features: -Cast Iron stoves finished with a black, heat resistant paint. -Air control for alternating burn rate -Air wash system helps keep the inside of the glass clean, so you benefit from the full flame effect-Simple pull handle system moves riddling grate to push soot and dirt into ash pan for easier cleaning -Complies with the BS/En13240 latest standardsIf you intend to use this appliance on a barge or boat it must be installed in accordance with BS 8511:2010- consult your qualified installer It is recommended that a carbon monoxide detector (available here) is installed in accordance with BS EN 50292:2002"
Price: 454.80
|
|
| "Clarke CVACASH500 Electric Ash Can Vacuum Cleaner (230V)" |
"Ideal for collecting cold ash & fire debris from fireplaces, wood & coal burning stoves, open fires, BBQ pits, charcoal grills, Chiminea's etc."
Price: 59.98
|
|
| "Clarke 6"" Stainless Steel Twin Wall Flue 45° Elbow" |
"A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. The It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter."
Price: 87.59
|
|
| "Clarke 6"" Stainless Steel Flue Cowling" |
"Flue cowls are designed to be fitted outside to chimney and flue tops to prevent rain, moisture and debris from falling into your fire or stove."
Price: 45.59
|
|
| |
|
