|
| |
| "Bahco 424-P Bevel Edge Chisel 25mm (1in)" |
"Carefully engineered bevel edged chisels to satisfy most professional requirements from smooth precision work to demanding carpentry applications. The specially designed 2-component handle, maximises control and comfort in use. The hardened and tempered blade is precision ground for maximum sharpness and long-lasting performance, and honed ready-to-use."
Price: 10.54
|
|
| "Bahco Combination Spanner 30mm" |
"SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance. The small, flat heads and dynamic drive profile are designed for easy access in confined spaces. Open-end angle 15° , ring end 15° offset, DIN 3113 / ISO 3318 / ISO 7738."
Price: 15.35
|
|
| "Bahco DD/S14 Deep Impact Socket 14 Piece Set 1/2in Square Drive" |
"Bahco DD/S14 Deep Impact Socket Set of 1/2in deep impact sockets, that have a black finish and are made from high performance alloy steel. To be used with machines, for maximum safety use clamping springs. Conforms to DIN 3121-G 12, 5 ISO 1174 standards. Comes supplied in a case with 2-component handles, and a 1 piece removable three section plastic box. Sizes: 10, 11, 12 ,13 ,14, 15, 16, 17, 18, 19, 21, 22, 24, and 27mm."
Price: 100
|
|
| "Bahco Hand Bastard Cut File 1-100-08-1-0 200mm (8in)" |
"Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse)."
Price: 5.8
|
|
| "Bahco Hand Second Cut File 1-100-12-2-0 300mm (12in)" |
"For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness."
Price: 10.62
|
|
| "Bahco 5-in-1 Switch Cabinet Master Key" |
"The Bahco 5-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical retaining clip and the key profiles are zinc die-cast for increased durability. The Master Key has 4 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a magnetic 5mm square and 1/4in bit holder, and a magnetic pocket for 1/4in bits in 7-8mm square profile. It has the following functions: 3 x Square: 5, 6 & 7-8mm. 1 x Triangular: 9mm. 1 x Two-way: 3-5mm."
Price: 28.15
|
|
| "Bahco Square Bastard Cut File 1-160-06-1-0 150mm (6in)" |
"Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse)."
Price: 4.7
|
|
| "Bahco Combination Spanner 12mm" |
"SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance. The small, flat heads and dynamic drive profile are designed for easy access in confined spaces. Open-end angle 15° , ring end 15° offset, DIN 3113 / ISO 3318 / ISO 7738."
Price: 5.08
|
|
| "Bahco Combination Spanner 16mm" |
"SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance. The small, flat heads and dynamic drive profile are designed for easy access in confined spaces. Open-end angle 15° , ring end 15° offset, DIN 3113 / ISO 3318 / ISO 7738."
Price: 6.16
|
|
| "Bahco BAHCOFIT Screwdriver Slotted Parallel Tip 5.5 x 300mm" |
"The Bahco BAHCOFIT Slotted Parallel Tip screwdrivers are suitable for slotted head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. Manufactured to ISO 2380 / DIN 5264 standards."
Price: 7.42
|
|
| "Bahco Spare Wheels For 306 Range of Pipe Cutters (Pack of 2)" |
"Spare wheels for the 306 range of tube cutters."
Price: 5.46
|
|
| "Bahco Hexagon Socket 3/8in Drive 12mm" |
"SBSF series sockets 3/8in, hexagon in metric and imperial sizes. DIN 3124 / ISO 2725. 1/2in 10 DIN 3120 / ISO 1174. Finish: nickel and matt chrome-plated. Material: VANADIUM-EXTRA. With dynamic-drive profile."
Price: 3.14
|
|
| "Bahco 87 Black Adjustable Wrench 760mm (30in)" |
"Bahco adjustable wrench with phosphated finish. Exceeding ISO specifications the wrench withstands high torque loads and the specifically heat treated Swedish V steel jaws give long life. Features include: Tapered jaws and 15º head angle with no protruding shank when fully open. Strong I section handle and spring loaded square section. Knurled adjusting nut. Ergo designed handle which ensures comfortable grip."
Price: 292.76
|
|
| "Bahco Half-Round Second Cut File 1-210-04-2-0 100mm (4in)" |
"Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut."
Price: 7.03
|
|
| "Bahco 1520G Power Cutter 200mm (8in)" |
"The Bahco 1520G Power cutter with centric precision cutting edges. Forged with cutting edges for piano, hard and soft wire. High leverage gives exceptional cutting performance with minimum effort. The precision cutting edges are additionally induction hardened 63-64 HRC. Made from Chrome-vanadium steel, the handles in two-component thermoplastic elastomer surface on tough polypropylene which gives a superior grip."
Price: 46.85
|
|
| "Bahco Claw Hammer Steel Shaft 570g (20oz)" |
"Claw hammer with tubular manganese steel shaft, octagonal neck and round head, bright polished comfortable black hand grip."
Price: 13.31
|
|
| "Bahco Needle File Set of 6 Cut 2 Smooth 2-470-16-2-0 160mm (6.2in)" |
"Set of 6 needle files in snapshut plastic wallet with hanging hole. 1 of each of the following :Hand, flat, half round, round, three square and square, with handle included. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm. Cut: 2 (smooth).Type: Needle set (6)."
Price: 43.46
|
|
| "Bahco 429 Claw Hammers" |
"Claw hammer with tubular manganese steel shaft, octagonal neck and round head, bright polished comfortable black hand grip."
Price: 13.31
|
|
| "Bahco Extension Bar 1/2in Drive 250mm (10in)" |
"SBS83 series extension bars with a 1/2in square drive."
Price: 8.14
|
|
| "Bahco Hexagon Socket 1/2in Drive 13mm" |
"SBS80 series metric sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome-plated finish. 1/2in square drive."
Price: 3
|
|
| "Bahco Hexagon Socket 1/2in Drive 22mm" |
"SBS80 series metric sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome-plated finish. 1/2in square drive."
Price: 3.88
|
|
| "Bahco Slim Taper Saw File 4-186-06-2-0 150mm (6in)" |
"Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in)."
Price: 4.48
|
|
| "Bahco BAHCOFIT Screwdriver Pozidriv Tip PZ0 x 75mm" |
"The Bahco BAHCOFIT Pozi Tip screwdrivers are suitable for Pozi head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification."
Price: 4.45
|
|
| "Bahco BAHCOFIT Screwdriver TORX Tip T10 x 75mm" |
"The Bahco BAHCOFIT Torx Tip screwdrivers are suitable for Torx head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification."
Price: 4.63
|
|
| "Bahco BAHCOFIT Insulated Screwdriver Phillips Tip PH0 x 75mm" |
"Bahco Insulated Phillips Screwdrivers are suitable for work on live equipment, up to 1, 000 Volts. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The blades are made from high performance alloy steel, which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver is branded with part number, tip symbol and size for easier identification. They are each individually tested and manufactured according to IEC 60900 and conform to ISO 8764."
Price: 4.91
|
|
| "Bahco Replacement Wheel For Tube Cutter 302-35" |
"Replacement Wheel for the Bahco 302-35 tube cutter. Suitable for use on copper, bronze, aluminium and steel tubes."
Price: 5.45
|
|
| "Bahco 306 Tube Cutter 12mm (Slice)" |
"Bahco Pipe Slices are automatic tube cutters that fit directly over the pipe and cuts with a simple twist. They are compact in size, making them ideal for work in confined spaces. With orange painted zinc body."
Price: 16.38
|
|
| "Bahco Telescopic Basin Wrench 10-32mm" |
"Bahco Telescopic basin nut wrench with a reversible jaw for accessing nuts on wash basins, bath tubs, sinks or bidets. With 4 adjustment sizes. Length: 280 to 460mm (telescopic) Capacity: 10 to 32mm"
Price: 38.36
|
|
| "Bahco 625-PEAR Carbide Edged Scraper Blade" |
"Pear shaped blade to fit the 625 Bahco scraper. Made from cemented carbide."
Price: 8.68
|
|
| |
|
