|
| |
| "Draper Draper MBH33/B 33 Piece Screwdriver and Magnetic Bit Holder Set" |
"This 33 piece set from Draper has been manufactured from chrome vanadium steel, hardened and tempered with a shot blast finish. Supplied in a convenient storage case, which opens up for easy access to the bits. The magnetic bit holder is made from a zinc alloy steel with chrome plated finish."
Price: 5.99
|
|
| "Draper Knipex 200mm High Leverage Diagonal Side Cutter - 12° Head" |
"The Knipex 200mm High Leverage Diagonal Side Cutter is professional quality and manufactured from chrome vanadium electric steel, is oil hardened and tempered. It has smoothly ground heads with cutting edges that are separately induction hardened to 64HRC, ideal for cutting piano and medium hard wires. The cutter has no conventional centre rivet but a forged-on pivot which gives extra leverage. The special head angled at 12° allows wire to be cut which protrudes from a flat surface. Heavy duty moulded handles and slip guards are featured for extra comfort and safety."
Price: 33.98
|
|
| "Draper Draper ETK3 Timing Kit for BMW & Vauxhall Vehicles" |
"A complete set of essential tools for replacing the timing belt/chain or correcting the belt/chain tension on BMW and Vauxhall vehicles. Ideal for professional vehicle technicians.Suitable for all BMW vehicles with the following engine codes: 20 4D 1, 17 4T 1, 25 6T 1 and Vauxhall vehicles codes: 25DT, X25DT"
Price: 91.99
|
|
| "Draper Draper Automatic Wire Strippers" |
"These Draper Automatic Wire Strippers are ideal for Professional or DIY use. They offer single motion stripping of wires/insulation and the crimping of insulated and non-insulated terminals."
Price: 15.98
|
|
| "Draper Draper COPP/VW Expert VW Coil-On-Plug Puller" |
"The Draper COPP/VW can be used for hooking under the ignition coil pack for easy removal."
Price: 12.98
|
|
| "Draper Draper Expert EPTW120-400 3/4'' Drive 120-400Nm Precision Torque Wrench" |
"The Draper EPTW120-400 Precision Torque Wrench has been constructed with a reversible ratchet head and locking preset action. The Torque values are viewed via a window in the handle. Draper's EPTW120-400 benefits from a range of 120-400Nm, accuracy ±4%. There is a full instruction manual and calibration certificate included with each torque wrench and this wrench is supplied in blow mould case.Manufactured and calibrated to ISO6789-1992-12-01 Standard"
Price: 239.99
|
|
| "Draper Draper 100G Reel of K60/40 Tin/Lead Flux Cored Solder Wire" |
"A 100g reel of standard K60/40 tin/lead flux cored solder. Suitable for electrical/electronic connections - not for use with drinking water. "
Price: 10.79
|
|
| "Draper Draper 2021 195mm Tack Lifter" |
"This tack lifter features a bright polished good quality steel claw blade with curved leverage end and plastic handle."
Price: 2.69
|
|
| "Draper Draper 250g Reel of K60/40 Tin/Lead Flux Cored Solder Wire" |
"A 250g reel of standard K60/40 tin/lead flux cored solder. Suitable for electrical/electronic connections - not for use with drinking water."
Price: 20.39
|
|
| "Draper Draper 1/2"" Drive 3 Piece Spark Plug Sockets" |
"These 6 point deep sockets forged from chrome vanadium steel hardened and tempered with a polished finish. Each socket has a knurled ring for extra grip. Fitted with rubber insert for spark plug insulator protection and retention."
Price: 10.79
|
|
| "Draper Draper Expert 40W Soldering Iron (230V)" |
"This soldering iron is complete with a metal stand and 1.1m cable with approved plug.The 40W soldering iron provides a stable and constant temperature for all soldering tasks. A great soldering iron to have around the home or garage, designed for electronic and automotive applications."
Price: 15.59
|
|
| "Draper Draper Expert 18W Soldering Iron (230V)" |
"This expert quality soldering iron is complete with tip, 1.5m cable and approved plug. Designed for continuous use in industrial environments."
Price: 29.99
|
|
| "Draper Draper Expert 100W Soldering Iron (230V)" |
"This soldering iron is complete with a metal stand and 1.1m cable with approved plug.The 100W soldering iron provides a stable and constant temperature for all soldering tasks. A great soldering iron to have around the home or garage, designed for electronic and automotive applications."
Price: 20.39
|
|
| "Draper Draper BD7TX/B 7 Piece 1/4'' and 3/8'' Square Drive TX-STAR® Socket Set" |
"The Draper BD7TX/B is manufactured from chrome vanadium steel for added strength and has been tempered and hardened to ensure reliability."
Price: 10.99
|
|
| "Draper Draper 80mm Ring Slogging Spanner" |
"The Draper 31432 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 189.00
|
|
| "Draper Draper PTK/2 7 Piece Imperial Ratchet Pipe Threading Kit" |
"The Draper 22498 is suitable for threading black gas or galvanised iron pipes. This kit includes four dieheads, two-piece tubular steel handle and compact ractchet head, with the compact ratchet head, suitable when working close to walls. The cast iron dieheads with alloy steel dies, have four chasers per head for a clean accurate thread, and four waste holes for quick sipersion of swarf. The set comes complete in a carry case for easy transportation."
Price: 73.99
|
|
| "Draper Draper 60mm Ring Slogging Spanner" |
"The Draper 31426 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 40.99
|
|
| "Draper Draper 70mm Ring Slogging Spanner" |
"The Draper 31428 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 119.99
|
|
| "Draper Draper 65mm Ring Slogging Spanner" |
"The Draper 31427 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 59.99
|
|
| "Draper Draper 46mm Ring Slogging Spanner" |
"The Draper 31423 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 33.98
|
|
| "Draper Draper 36mm Ring Slogging Spanner" |
"The Draper 31421 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 21.98
|
|
| "Draper Draper 55mm Ring Slogging Spanner" |
"The Draper 31425 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 39.98
|
|
| "Draper Draper 30mm Slogging Ring Spanner" |
"The Draper 31419 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 12.98
|
|
| "Draper Draper 41mm Ring Slogging Spanner" |
"The Draper 31422 is a flat pattern spanner forged from high quality hardened and tempered carbon steel, completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 28.99
|
|
| "Draper Draper 50mm Ring Slogging Spanner" |
"The Draper 31424 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 37.99
|
|
| "Draper Draper 75mm Ring Slogging Spanner" |
"The Draper 31431 is a flat pattern spanner forged from high quality hardened and tempered carbon steel completed with a black phosphate finish. This spanner is based on DIN7444 specifications."
Price: 149.00
|
|
| "Draper Draper 1/2'' 9 Piece Square Drive 100mm Long TX-STAR Socket Bit Set" |
"The Draper 16329 is a nine piece set of TX-STAR socket bits manufactured from vanadium steel, with sand blasted bits of S2 silicon steel for added strength. Each socket has a knurled ring for extra grip, and this set is supplied on a steel socket retaining rail for added convinience."
Price: 28.99
|
|
| "Draper Draper D-TX/10/100 3/8'' Drive 100mm Long TX-STAR Socket Bit 10 Piece Set" |
"The Draper 16310 is a ten piece socket bit set manufactured from a hard wearing vanadium steel, with sand blasted bits of S2 silicon steel for added stength. This set also benefits from a knurled ring for extra grip and it comes supplied on a steel socket retaining rail for added convinience."
Price: 24.98
|
|
| "Draper Draper BDH14TX/B 1/4'', 3/8'', 1/2'' Drive 14 Piece TX-STAR Socket Set" |
"The Draper 34415 is manufactured from chrome vanadium steel with a polished finish for durability. This 14 piece set is also supplied on a socket retaining bar for easy mobility."
Price: 18.98
|
|
| |
|
