|
| |
| "Stanley Stanley Quick Clamp Vice" |
"Bench Mounted, can be used on site, in the van or at home. Fast Close Mechanism with quick fit and trigger action. Left / Right Hand Operation. Soft Jaws. Non marring"
Price: 27.59
|
|
| "Trend Trend SNAP/FS/35 Snappy Forstner Bit" |
"High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes.D 35 mmOL 80 mmShank Diameter 1/4 inch hex"
Price: 22.01
|
|
| "Trend Trend Universal Door Clamp & Stand" |
"A mobile, solid steel stand that firmly holds a door on its edge so routing out hinge recesses and holes mortise for locks can be done easily.It features an anti-tilt non scratch base and enables the door to be tilted back to allow fitting into frame."
Price: 53.99
|
|
| "Trend Trend BSC/MIX/100 Mixed Jointing Biscuits (Pack of 100)" |
"A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and accurate jointing of hard & soft woods, plywood and composition board, look no further."
Price: 9.59
|
|
| "Trend Trend BSC/20/100 NO.20 Jointing Biscuits (Pack of 100)" |
"A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and accurate jointing of hard & soft woods, plywood and composition board, look no further."
Price: 9.59
|
|
| "Trend Trend PH/7X30/500 7x30mm Pocket Hole Self Tapping Screws (500 Pack)" |
"A pack of 500 7x30mm self tapping screws to be used with the pocket hole jig to join workpieces together to create tight strong joints."
Price: 13.19
|
|
| "Trend Trend Snap/SDA/3 - Snappy Square Drive 1/2x50mm" |
"Square drive with ball locator."
Price: 10.94
|
|
| "Trend Trend LOC/BLK/PK1 - Pack Of 4 Loc Block Workpiece Supports" |
"Pack of four interlocking gripping blocks which lock together to allow the workpiece to be held in place when sanding, drilling and finishing."
Price: 18.98
|
|
| "Trend Trend T10EK 2000W Router (230V)" |
"The Trend T10 is a powerful 2000W router making it ideal for use by the tradesman in the workshop or on site."
Price: 395.99
|
|
| "Trend Trend 'Pro Grabit' Damaged Bolt & Screw Remover" |
"Trend's useful power-drill driven, 2-piece 'Pro Grabit' provides the perfect solution for removing damaged screws & fasteners. Each ingeniously designed 'bit' is double-ended - one 'end' is used as a burnisher to effectively clean out the damaged fastener head. Rotating the 'bit' reveals the 2nd 'end'; by applying steady pressure, this end will 'bite' & tap into the screw head enabling it to be removed."
Price: 17.99
|
|
| "Trend Trend Snappy Snap/SQ/2 - Square No2 Bit - Pack Of 3" |
"This product includes: 3 x Robertson No 2 Screwdriver bits"
Price: 4.79
|
|
| "Trend Trend T46/01X1/4TC - 12.7mm Diameter Trimming Cutter" |
"For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 26.99
|
|
| "Trend Trend Door Clamp" |
"A clamp to hold open doors whilst drilling the holes for, and fitting, locks. Made from a lightweight non scratch solid steel and is suitable for firmly gripping doors up to 55mm thick. The clamp is padded to prevent floor and door damage."
Price: 26.39
|
|
| "Trend Trend Snap/SDA/2 - Snappy Square Drive 3/8x50mm" |
"Square drive with ball locator. Chrome Vanadium steel."
Price: 9.55
|
|
| "Trend Trend BSC/10/100 NO.10 Jointing Biscuits (Pack of 100)" |
"A pack of 100 simple, easy to use and effective jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and accurate jointing of hard & soft woods, plywood and composition board, look no further."
Price: 9.59
|
|
| "Trend Trend Bradawl WP-HJ09 F" |
"Replacement bradawl only for the Hinge Jig."
Price: 5.99
|
|
| "Trend Trend D/LIFT/B Door & Board Swivel Lifter" |
"Ideal for carpenters, plasterers and drywall fixer this lifter allows up and down and side to side movement for easy positioning and fixing of door, panels and plasterboard."
Price: 21.98
|
|
| "Trend Trend D/LIFT/A Door Lifter" |
"Foot operated door lifter."
Price: 19.99
|
|
| "Trend Trend SNAP/IPZ2/10 Trend Snappy Tin Coated Pz2 Bits" |
"A pack of 25mm Pozi insert bits Titanium Nitride (TiN) coated."
Price: 10.22
|
|
| "Trend Trend M/KWS01 Kitchen Worktop Off-Set Jig Scriber" |
"A spring loaded pencil in a steel body to give the offset between the worktop jig and the guide bush when using a ½"" collet router cutter. Allows the true cutter path to be drawn onto the worktop to give the cutting edge position when fitting awkward design kitchens. Has an easy grip gnurled shaft for easy handling."
Price: 24.98
|
|
| "Trend Trend T5EB 1000W Plunge Router (230V)" |
"A compact and powerful variable speed router. Suitable for routing light and medium duty woodworking applications with a 1/4” shank router cutter."
Price: 189.00
|
|
| "Trend Trend T11 VS Plunge Router 1/2"" (230V)" |
"This Heavy duty router has a powerful 230V/2000W variable speed motor. Suitable for routing heavy-duty woodworking applications with a 1/2” shank router cutter. Can be used in a router table and has a fine height adjuster for above and below the table adjustment."
Price: 433.99
|
|
| "Trend Trend Snap/SDA/1 - Snappy Square Drive 1/4x50mm" |
"Square drive with ball locator."
Price: 7.34
|
|
| "Trend Trend BSC/0/100 NO.0 Jointing Biscuits (Pack of 100)" |
"A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and accurate jointing of hard & soft woods, plywood and composition board, look no further."
Price: 8.99
|
|
| "Trend Trend PH/7X30/500C Pocket Hole Screws" |
"Ideal for softer timbers, plywood and particle board as thread gives better holding power. Pack of 500 coarse thread square drive self tapping wood screws used with the PH/JIG."
Price: 18.98
|
|
| "Trend Trend FFS/120 Fold Flush Saw" |
"Folding flush saw 120mm with flexible blade to allow easier operation."
Price: 25.99
|
|
| "Trend Trend Snappy Snap/SQ/123 - Square Bit Mix Pack of 3" |
"This pack includes: 1 x Robertson No 1 Screwdriver bits 1 x Robertson No 2 Screwdriver bits 1 x Robertson No 3 Screwdriver bits"
Price: 4.49
|
|
| "Trend Trend SNAP/HD/SET Snappy Hex Drill Set 7 Piece" |
"A set of seven quick change hex shank through hole drilling timber."
Price: 10.94
|
|
| "Trend Trend SNAP/ND/13M Trend Snappy Nut Driver" |
"A high quality magnetic nut driver 13mm."
Price: 13.15
|
|
| |
|
