|
| |
| "Trend PH/JIG Pocket Hole Jig" |
"The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with variable pitch of 29mm to 63mm. Use on timber, MDF, plywood and block board. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Work piece can be handled immediately after gluing and screwing, creating time saving benefits. No clamps required."
Price: 90.55
|
|
| "Trend RB/A Replacement Blades (Pack 10)" |
"Spare Rota-Tip Blades to suit Rota Tip Cutters. Length 29. 5 mm Width 9. 0 mm Thickness 1. 5 mm Pack of 10"
Price: 78.29
|
|
| "Trend RB/B Replacement Blade" |
"Spare Rota-Tip Blades to suit Rota Tip Cutters. Length. 49. 5mm. Width. 12mm."
Price: 10.6
|
|
| "Trend RB/E Rotatip Blade 12mm" |
"Spare Rota-Tip Blades to suit Rotatip Cutters. Length. 12mm. Width. 12mm."
Price: 5.68
|
|
| "Trend RB/F Rota-Tip Blade 30mm" |
"Spare Rota-tip blades to suit Rota Tip Cutters. Length. 30. 0mm. Width. 12. 0mm"
Price: 7.37
|
|
| "Trend S3/21 x 1/4 Solid Two Flute Cutter 6.3mm x 28mm" |
"The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT."
Price: 46.06
|
|
| "Trend S3/22 x 1/4 Solid Two Flute Cutter 6.3mm x 25mm" |
"The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT."
Price: 38.68
|
|
| "Trend S49/1X1/4STC Carbide Rasp 6.3mm x 20mm" |
"Trend S49/1X1/4STC solid fine cut Carbide Rasp, suitable for grinding, carving and shaping of glass reinforced plastics (GRP). Use at speed 10, 000 -30, 000 RPM. For plunge cutting. Diameter: 6. 3mm (1/4in).Working length: 20mm."
Price: 34.68
|
|
| "Trend S49/3 x 6mm STC Solid Carbide Bullnose Burr 10 x 20mm" |
"Tooling for metal, glass reinforced plastic (GRP), plastic and wood. Carving, weld removal and drilling, hole enlarging. Solid carbide head. For removing welds and burrs in metal and hand engraving and sculpting wood and metal. D1: 10mm. Cut length: 20mm. Shank Diameter: 6mm."
Price: 33.92
|
|
| "Trend SNAP/CB/3TC TCT Tipped Counterbore 4.75 x 12.7mm" |
"Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications: D1 3/16 inch D1 4. 75 mm D2 1/2 inch D2 12. 7 mm Shank Diameter 1/4 inch."
Price: 19.75
|
|
| "Trend SNAP/CS/4 Countersink with 5/64in Drill" |
"The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits."
Price: 7.27
|
|
| "Trend SNAP/CS/8 Countersink with 7/64in Drill" |
"The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits."
Price: 7.27
|
|
| "Trend SNAP/CS/SET 5 Piece Countersink Set" |
"The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9. 5mm (3/8in) or 12. 7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains: 1 x 2. 0mm (5/64in) Drill and C/S Size No. 4.1 x 2. 4mm (3/32in) Drill and C/S Size No. 6.1 x 2. 8mm (7/64in) Drill and C/S Size. No. 8.1 x 3. 2mm (1/8in) Drill and C/S Size. No. 10. 1 x 3. 6mm (9/64in) Drill and C/S Size. No. 12."
Price: 29.02
|
|
| "Trend SNAP/CSTC/SET 5 Piece TCT Countersink Set" |
"The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9. 5mm (3/8in) or 12. 7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains: 1 x 2. 0mm (5/64in) Drill and C/S Size No. 4.1 x 2. 4mm (3/32in) Drill and C/S Size No. 6.1 x 2. 8mm (7/64in) Drill and C/S Size. No. 8.1 x 3. 2mm (1/8in) Drill and C/S Size. No. 10. 1 x 3. 6mm (9/64in) Drill and C/S Size. No. 12."
Price: 60.72
|
|
| "Trend SNAP/D/2 Drill Adaptor 1/16in Bore" |
"The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck."
Price: 4.55
|
|
| "Trend SNAP/D/3 Drill Adaptor 3/32in Bore" |
"The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck."
Price: 4.55
|
|
| "Trend SNAP/D/5 Drill Adaptor 5/32in Bore" |
"The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck."
Price: 4.55
|
|
| "Trend SNAP/D/6 Drill Adaptor 3/16in Bore" |
"The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck."
Price: 4.69
|
|
| "Trend SNAP/D/8 Drill Adaptor 1/4in Bore" |
"The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck."
Price: 5.39
|
|
| "Trend SNAP/FLIP/SET 4pc Flip Driver Set" |
"A four piece drill countersinking and screwdriving flip over set."
Price: 16.1
|
|
| "Trend SNAP/IPZ2/10 25mm Bit Pozi No.2 (Pack of 10)" |
"Titanium coated high grade tool steel for extra wear resistance to Cam Out. Type: No 2 Pozi Bits Length: 25mm Qty: 10"
Price: 9.92
|
|
| "Trend SNAP/PC/12 Plug Cutter 1/2in" |
"Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck."
Price: 16.27
|
|
| "Trend SNAP/QC Quick Chuck" |
"The Quick Chuck will fit any power drill that uses a standard 9. 5 mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and out without a chuck key. The Quick Chuck has six flats on the shank to ensure non-slippage in the chuck."
Price: 12.77
|
|
| "Trend Tool Holder Bit Set" |
"heavy-duty fabric tool holder with a selection of assorted Snappy tools. With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are hook and Loop fastening."
Price: 55.06
|
|
| "Trend Snap/TH2/Set Tool Holder 60PC Bit Set" |
"Heavy-duty fabric tool holder available with assorted Snappy tools. Standard Quick Chuck, Masonry bits 5, 6,7 & 8mm, Drill bit guide No. 6, No8. Drills 1, 2,3, 4,5, 6 & 7mm, Auger bits 10 & 13mm, Flat bits 16, 19, 22, 25 & 30 mm. Drill countersinks 2. 5, 3. 25 & 3. 5mm, Deburrer/countersink, Hole enlarger. Square drive adapter 1/4, 3/8 & 1/2in, Screwdriver bit Pozi No. 1,2, 3.Magnetic drivers 6, 8, 10 & 12 mm. A/F, Snappy Pencil Insert bits Magnetic bit holder (including 5 slotted 3 Pozi, 3 Phillips, 6 hex & 6 Torx)."
Price: 111.35
|
|
| "Trend AIR STEALTH Half Mask Medium/Large" |
"The Trend AIR STEALTH Half Mask protects the user against airborne particles, oil aerosols, mist, welds and fumes. Fitted with a twin HEPAC pleat encapsulated filter, that provides 99. 99% filtration of airborne particles and aerosols at 0. 3 micron and above. The exhalation valve is located at the bottom of the face piece, this helps to prevent exhalation fumes steaming or fogging glasses/visors. A protective grill covers 100% of filter surface. Protecting the filter from moisture and particulates, ensuring it performs better in clogging pressure and filtration efficiency. Conforms to half mask standard: BS EN 140Respiratory Protection: BS EN 143 P3(R) Assigned Protection Factor: APF20"
Price: 27.01
|
|
| "Trend AIR STEALTH P3 Filter Pack of 2" |
"Pair of P3(R) filters for the Trend AIR STEALTH half mask. The twin HEPAC pleat encapsulated filter design provides 99. 99% filtration of airborne particles and aerosols at 0. 3 micron and above. High Efficiency Particulate Air Composite"
Price: 11.39
|
|
| "Trend T11EK 1/2in Variable Speed Router 240Volt" |
"T11 Variable speed workshop router with built-in Quick Raiser fine adjuster and electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up and the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock and hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank. 3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above and below height adjustment. One revolution of the handle equals 1. 5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications: Rating: Professional/Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout size: 35 mm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6. 3 kg."
Price: 507.38
|
|
| "Trend Wet & Dry Vacuum with Power Take Off 2200W 240V" |
"The Trend T31A Wet & Dry Vacuum is a powerful, semi-professional vacuum extractor. It has a powerful but quiet 1, 400 watt silenced motor and a large, 35 litre capacity impact resistant plastic container with castors. The vacuum features power tool take off with an auto-start feature of up to 2, 200 watts and 5 second run-on delay. It has an extra long hose, a power tool adaptor and a HEPA cartridge filter with 0. 3 micron filter efficiency and nylon pre-filter. Dust class category L rated to EN60335-2-69, for dust with workplace limit values > 1 mg/m3. Ideal for workshop, garage and light trade applications. Supplied with floor cleaning kit, power tool adaptor, crevice tool, upholstery tool and a no foam filter. Specification Input Power: 1, 400 Watt. Capacity: Wet: 22 Litres, Dry: 35 Litres. Max. Airflow: 4, 200 l/min. Vacuum Pressure: 270 mbar. Hose Length: 5m. Weight: 7. 9kg."
Price: 256.96
|
|
| |
|
