 |
| ARO L36341-110 Air Line Lubricator,1/2In,156cfm,250 psi |
| $74.99 |
| Choose from in-line and mist pneumatic lubricators. Take a look at the features for Aro Modular Air Line Lubricator....[Read More] |
 |
| "Laser Tools 4188 Rear Bush Installer - VAG" |
| "This tool is essential for replacing the bonded rubber | plastic rear axle mounting bushes fitted to VAG vehicles, without removing the rear axle assembly from the vehicle. This tool is essential for replacing the bonded rubber | plastic rear axle mounting bushes fitted to VAG vehicles, without removing the rear axle assembly from the vehicle. It's thrust bearing allows the bush to be fitted quickly and easily without causing damage. The drive screw and nut should be lubricated before and after every use. Spares are available: threaded bar - Part No. 1143, nut and washer - Part No. 1027, nut and bearing - Part No. 1028. Primarily for use with Audi A3, Volkswagen Golf IV, Bora 1.4 | 1.6 | 1.8 | 2.0 and 1.9D (01-03). Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)"
Price: 94.73 |
| "Laser Tools 4079 Soldering Iron - 60 Watt" |
| "60 Watt soldering iron with standard BS plug.Standard BS plug.240 volt.60 Watt.RoSH compliant.CE certificated."
Price: 17.72 |
| "Laser Tools 4076 Timing Tool Kit - GM Engines" |
| "This set of tools enables the correct timing to be made when servicing the Renault Clio 1.5 (K9K), 1.9 (F9Q) and 2.3/2.5 dCi G9 engines used in Laguna II, Espace, Trafic and Master plus 2.2 dTi (2000-05) engine codes G9T 720 in Vauxhall Movano 2.2 TDI.Renault Clio 1.5 (K9K), 1.9 (F9Q) and 2.3/2.5 dCi G9 engines used in Laguna II, Espace, Trafic and MasterPlus 2.2 dTi (2000-05) engine codes G9T 720 in Vauxhall Movano 2.2 TDIAlso Nissan Kubistar, Primastar, Interstar and Micra with 1.5/2.2/2.5 dCi engines (G9U, K9K, F9Q, G9T (2002-2009)OEM codes: MOT 1489, 1054, 1430, 1453, 1538, 1536, 1537, 1534Metal case available - Part No. 4536"
Price: 175.1 |
| "Laser Tools 4231 Hose Clamp Pliers - Angle Type | Swivel Jaws" |
| "For accessing reusable Clic/Clic R type hose clamps in normally inaccessible positions. Can be used at any angle and with swivel head for most awkward angles.Suitable for accessing reusable Clic/Clic R type hose clamps.Use at any angle.Also has a swivel head for awkward angles.Spring loaded handles for ease of use.Soft grip handles."
Price: 26.59 |
| "Laser Tools 4275 Flywheel Locking Tool" |
| "This flywheel locking tool is now available with 2 extra adaptors allowing use on a larger model group in the Ford range in both petrol and diesel engines. Flywheel locking tool OEM 303-393. Adaptors OEM 303-393-01/-02For Ford diesel and petrol engines3 PieceFlywheel Locking tool OEM 21-168/303-393Flywheel Locking tool adaptor (01) 303-393-01Flywheel Locking tool adaptor (01) 303-393-02"
Price: 36.33 |
| "Laser Tools 4083 Timing Tools - Volkswagen 3 cylinder" |
| "This collection of components has been put together especially for the 1.2 petrol engines found in the VAG range.Volkswagen Lupo and Polo 3 cylinder 6/12v 1.2 litre enginesAlso Seat Cordoba and Ibiza 1.2 petrol engines (2002-2009)OEM Ref. T10123/T10121/T10120Skoda Fabia II, Roomster 1.2P with engine codes AWY/BMD/AZQ/BME/BZG (2002-2010)Storage case supplied"
Price: 88.59 |
| "Laser Tools 4027 Terminal Tool Set" |
| "A comprehensive terminal tool set that incorporates up to the minute products for use on standard Weather Pack and Pack Con terminals, the latest tool for new Volkswagen and Audi vehicles plus special tools for coolant sensors, wiring harnesses and terminal blocks on Chrysler, Hyundai, Kia and Mitsubishi vehicles. It is almost impossible to remove the wires from modern terminal blocks without damage without these tools.A comprehensive terminal tool set that incorporates up to the minute products for use on standard Weather Pack and Air Con terminals.Removes wires from terminal blocks without damage.Largest set of special tools for releasing coolant sensors, wiring harnesses and terminal blocks.Suitable for most modern vehicles including Chrysler, Hyundai, Kia, Mitsubishi and VAG.Supplied in a blow mould case."
Price: 82.62 |
| "Laser Tools 4151 TDC Indicator - Alfa Romeo | Fiat" |
| "Essential for measuring the cylinder position at TDC on multi-valve engines. The 2mm probe gives access to the piston face which is prohibited by the valve.Essential for measuring the cylinder position at TDC on multi-valve engines.The 2mm probe gives access to the piston face which is prohibited by the valve.Specifically required where no TDC marks are shown.OEM Ref 1 895 443 000.Use with Laser Part No. 2584 DTI (dial test indicator)."
Price: 49.52 |
| "Laser Tools 4068 Tension Pre-setting Tool" |
| "The tensioner tool sets the belt tension in the manner described by the manufacturer for their 1.9 dCi engines. The tool is supplied with a set of 3 tensioner covers to fit the various diameters used according to the engine number. For further coverage of the 1.9 dCi range see also the new 4798 tensioner cover.Enables correct pre-tensioning to be applied to the timing belt3 interchangeable spacersOEM code MOT 1543 / KM 6234Includes a spacing washer to suit the variety of tensioners usedSuitable for engine codes F9Q732 | F9Q718 | F9Q760"
Price: 63.53 |
| "Laser Tools 4044 Diesel Injector Puller" |
| "This puller assists with the removal of stubborn Bosch and Lucas diesel injectors, saving time and money when injectors are difficult to remove. Supplied with M8 (male) and M12 | M14 (female) adaptors in a blow mould case for storage.Includes M8 (male) and M12 | M14 (female) adaptors on each endAssists removal of stubborn Bosch and Lucas diesel injectorsPresented in a handy blow mould caseSaves time and money when injectors are difficult to removeIncorporating a slide hammer"
Price: 77.84 |
| "Laser Tools 4146 Impact Socket Set - Hub Nuts | 3pc Chrome Molybdenum" |
| "Specifically designed for 12pt hub nuts this 3 piece socket set includes 30mm | 32mm and 36mm in bi-Hex format and is used on most modern vehicles including some commercials.A set of three thin walled, air impact 12pt (bi-Hex) sockets.1/2"" drive.Sizes: 30mm (42mm external dia., 62mm depth, 37mm drive depth), 32mm (44mm external dia., 64mm depth, 37mm drive depth), 36mm (50mm external dia., 63mm depth, 36mm drive depth).Specifically designed for front hub nuts.Chrome Molybdenum."
Price: 56.75 |
| "Laser Tools 4288 Brake Disc Removal Tool - Ford Transit Chrome Molybdenum" |
| "Removes the front brake discs without damaging the bearings on FWD and RWD Ford Transits from 2001 onwards. Manufactured from Chrome Molybdenum for strength.For use specifically for Ford Transits 2001 onward.Removes front brake discs without damaging the bearings.Can be used on FWD & RWD.OEM Code 204-345B."
Price: 91.74 |
| "Laser Tools 4086 Locking Tool Set - Diesel Engines" |
| "A practical kit allowing the locking of the camshaft and crankshaft for replacement of the timing belt on the Ford range of 1.8 TDDi, TDCi and turbo diesel engines. Used on the Ford diesel engine where the diesel pump is driven by a separate chain drive.A set of engine timing locking tools for the Ford TDDi/TDCi 1.8 engine.Engine codes C9DC, F9DA/B, C9DA/B, BHDA/BBHPA, HCPA.Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller.Supplied in storage case.For setting the timing chain see Part No. 4173."
Price: 89 |
| "Laser Tools 4399 Valve Stem Seal Service Kit - Audi 20V" |
| "This kit is essential for renewing the Valve Stem Seals without removing the cylinder head on Audi vehicles with 20v engines.Compressor unit assembly with valve spring holding tool (OEM. 3364).Pressure Hose (OEM. 653/3).Valve Stem Seal replacer (OEM 3365).Essential for Audi 20v with engine codes ADR/APT.Essential for renewing the valve stem seals without removing the cylinder head."
Price: 159.78 |
| "Laser Tools 4066 Timing Tool Kit - Ford" |
| "Timing tool Kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4 TDCi.Timing tool kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4For engines built from 2002-2010Includes camshaft/crankshaft sprocket alignment pin, chain tensioner, fuel pump cover removal tool and fuel injection pump sprocket locking toolSupplied in foam trayMetal case available - Part No. 4536"
Price: 114.25 |
| "Laser Tools 4346 Timing Tool Set - VAG" |
| "Timing Tool Set for VAG 2.0Litre TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models. Also found on the Ford Galaxy models with ASZ and ASZ1 VAG engines. Set includes Crankshaft Pulley Locking Tools for round (T10050) sprockets at 12oClock position and oval sprockets (T10100) at 1oClock position.Timing Tool Set for VAG TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models.Includes two versions of Crankshaft Sprocket Locking Tool included.Full OEM reference and guidance notes included with each setSpecifically designed for Belt driven diesel enginesTools also available separately"
Price: 41.69 |
| "Laser Tools 4067 Timing Tool Set - Vauxhall | Saab" |
| "This timing tool kit is specifically designed for Fiat chain driven engines fitted to the Vauxhall/Opel | Saab 1.3 CDTi and 1.9 CDTi belt driven models.1.9 CDTi belt driven engines fitted to Saab 9-3 (2004-2009) and 905 (2003-2020). Saab engine codes Z19DT | Z19DTH1.9 CDTi belt driven engines fitted to Astra-H, Vectra-C, Signum, Zafira-B with Z19DT and Z19DTL engines1.3 CDTi chain driven engines fitted to Agila, Corsa-C, Combo-C, Astra-H, Tigra-B, Meriva with Z13DT, Z13DTH, Z13DTJ enginesSupplied in foam tray to ensure all tools are removed from engine after use. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)Made in Sheffield"
Price: 128.9 |
| "Laser Tools 4233 Oil Filter Wrench - 92mm x 15 Flutes" |
| "Cup type oil filter wrench 92mm x 15 flutes suitable for use on Volkswagen Passat | 1.9 TDI | Porsche | Chrysler | Opel | Ford | Renault | Nissan | Mitsubishi | Alfa Romeo | Volvo | MAN canister filters.Cup type oil filter wrench.92mm (point to flat) x 15 flutes 3/8D Suitable for use on Volkswagen Passat | 1.9 TDI | Porsche | Chrysler | Opel | Ford | Renault | Nissan | Mitsubishi | Alfa Romeo | Volvo | MAN canister filters.Removes paper filter without damaging the filter housing.0"
Price: 5.71 |
| "Laser Tools 4375 Injector Socket Set 4pc" |
| "A four piece toothed Injector Socket Set for use on commercial vehicles. 1/2""D x 72mm x 4 tooth for Mercedes-Benz, Hex 32mm x 70mm x 4 tooth (with Spline M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra, 1/2""D x 120mm x 3 tooth for Mercedes-Benz and Hex 32mm x 120mm x 4 tooth for Man and Mercedes-Benz. Also suitable for some Iveco, Scania and Renault commercial vehicles. Blow moulded case supplied for storage.1/2""D x 120mm x 3 teeth for Mercedes-Benz.Hex 32mm x 70mm x 4 teeth (with Spline M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.1/2""D x 72mm x 4 tooth for Mercedes-Benz.Also suitable for some Iveco, Scania and Renault commercial vehicles.Presented in a blow mould case."
Price: 54.64 |
| "Laser Tools 4273 Timing Tools - Land Rover/Jaguar V6" |
| "This tool kit is a complete kit that allows the valve timing to be set/maintained during cam belt replacementTiming pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissionsEngine Code 276DT 2004-2007 and 306DT 2009-2014Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)Camshaft Sprocket aligning tool 303-1132Camshaft sprocket timing pins 303-1126"
Price: 87.52 |
| "Laser Tools 4324 Extra Long Glow Plug Socket Set 6pc Chrome Vanadium" |
| "Glow plug and spark plug sockets (150mm long) with universal joint for restricted access and designed to grip plug being extracted. Sizes: 8mm | 9mm | 10mm | 12mm | 14mm | 16mm. Manufactured from Chrome Vanadium and supplied in blow moulded caseDesigned to grip plug being extracted.Sizes: 8mm | 9mm | 10mm | 12mm | 14mm | 16mm.Extra long 150mm & 3/8""Drive.Includes universal joint for restricted access.Manufactured from Chrome Vanadium."
Price: 75.55 |
| "Laser Tools 4064 Injection Pump Puller" |
| "A special diesel injection pump puller for BMW | Land Rover | Vauxhall/Opel vehicles with 2.5 TDS engines.For 2.5 TDS engines in BMW (E34 | E36 | E38) | Land Rover | Vauxhall/Opel.Full engine locking tool kit also available.BMW OEM Ref. 13-5-120.Land Rover OEM Ref. LRT12-119.Vauxhall/Opel OEM Ref. KM 825."
Price: 18.03 |
| "Laser Tools 4287 Cooling System Vacuum Purge & Refill Kit" |
| "For refilling radiators with coolant without introducing air pockets. Complete with adaptors for most modern cars and instructions. Packed in a blow mould case.For refilling radiators with coolant mix without introducing air pockets.Complete with adaptors for most modern cars.Adaptor sizes: 35mm | 39mm | 44mm | 48mm diameter.Adaptors expand by approximately 4mm.Packaged in a blow mould case with instructions."
Price: 101.95 |
| "Laser Tools 4105 Stereo/Sat Nav Removal Set - 32pc" |
| "For the removal of most popular car stereo and navigation systems including Becker, Clarion, Kenwood, Sony, Grundig and Blaupunkt.Comprehensive set of tools for Becker, Clarion, Kenwood, Sony, Grundig and BlaupunktFor the removal of most popular car stereo and navigation systemsComes in a handy storage caseTime saverEssential tool for removal without damage to the fascia panel"
Price: 56.1 |
| "Laser Tools 4409 Timing Tool Kit - Focus CMax" |
| "A neat solution, designed to allow the locking of vital timed components on the 1.6 Ti-VCT engines from Ford Also required Flywheel Locking Tool and adaptors (OEM 303-393/303-393-02) Laser Part No 4275This five piece set is essential for replacing the Cam belt on Ford Focus/Cmax 1.6 Ti-VCT with engine code HXDA (2003-2007) plus 2.0 TDCi with engine codes G6DA, G6DB, G6DC 2003-2007.Set includes Camshaft Sprocket Holding Tool (OEM 303-1097),Tensioner Pulley Locking Pin ( OEM 303-1054)Flywheel Timing Pin (OEM 303-1059), Crankshaft timing pin (OEM 303-748),Camshaft Sprocket Locking Tool (OEM 303-735)."
Price: 46.61 |
| "Laser Tools 4335 Injector Puller Set" |
| "This six piece injector puller with impact weight has been specially designed for removing stubborn injectors on CDi enginesThis injector puller set with impact weight has been specially designed for removing stubborn injectors on Mercedes-Benz vehicles fitted with CDi enginesOn some applications the injectors need to be removed to gain access to the cam cover.A high quality tap is also included for rethreading or cleaning the bracket used to keep the injector in place.Internal and external forks are included for drawing out the injector.Packaged in a blow mould case for easy storage"
Price: 192.48 |
| "Laser Tools 4232 Oil Filter Wrench - 65mm x 14 Flutes" |
| "Cup style oil filter wrench suitable for use on most modern Japanese engines. Cup style oil filter wrench.65mm x 14 flutes x 3/8""D.Suitable for most modern Japanese vehicles including Mazda 6. Also used on Ford Mondeo with MZR engine.Also suitable for some motorcycles.Applications for motorcycles: Honda 15410 (MM5-003) (MM9-003/013) (MM9-305/405) (MM0-P00/1/3) (MT7-003) and 15412 (MT7-003) | Kawasaki 16097 - 1059/1061/3/4/6/7 | Yamaha 3FV - 13440-00, 3GH 13440-00/10 | Polaris 308 - 4963, Triumph 1050cc 3 cylinder engines."
Price: 5.48 |
| "Laser Tools 4371 Twin Faced Hammer 16oz" |
| "Versatile, rubber and steel faced hammer for a multitude of uses. Versatile, rubber and steel faced hammer for a multitude of uses.Manufactured from S45C Steel and hardened to 40-45HRC.The handle is made from polypropylene with a TPR grip.Steel face is injected into the rubber for maximum impactTwin faced"
Price: 12.68 |
| "Laser Tools 4422 Valve Shim Remover" |
| "For use on some European Cars with overhead camshafts which use space shims. Used on Vauxhall/Opel and VolvoFor use on overhead camshafts.European models including Volvo | Vauxhall/Opel.T-bar action.Removes shims easily.Time saver."
Price: 55.68 |
