| "Laser Tools 4809 Crankshaft Seal Tool - VAG" |
| "This Crankshaft and Installer Tool can be used on Golf 2004, Touran 2004, Audi A3 2004, and 4 cylinder diesel engine applications including 2004 models 1.4i Turbo, 1.4-1.6 Direct Injection (Petrol), 1.9, 2.0SDI, 2.0 TDi, 2.0 and 2.0 Common Rails (Diesel) Removes and installs. Seal housing carries the crankshaft sensor mountingApplications include: Golf 2004, Touran 2004, Audi A3 2004, and 4 cylinder diesel, 1.9, 2.0SDI, 2.0 TDi, 2.0 and 2.0 Common Rails (Diesel).1.4i Turbo, 1.4-1.6 Direct Injection (Petrol). 2004 models 1.4i Turbo, 1.4-1.6 Direct Injection. OEM Tool Code:- T10134.Engine specific tool vital to ensure the correct alignment of main seal house crankshaft sensor.Now has updated bolts to ensure compatability with both composite plastic and metal bodied seals."
Price: 271.57 |
| "Laser Tools 4770 Serpentine Belt Tool Kit - BMW Mini" |
| "This Mini service kit comprises of the serpentine belt tools required to remove and fit the auxiliary drive belts This set of tools enables the simple removal and replacement of the serpentine belt when servicing the chain driven engineCovers Mini One/Cooper/Cooper S 1.6 petrol driven enginesEngine codes: W10816AA/W10816BA/W11816AA enginesSupplied in metal storage caseFull applications and guidance notes included"
Price: 142.74 |
| "Laser Tools 4795 Crankshaft Seal Installing Tool - VAG" |
| "This Crankshaft Seal Flange Remover and Installer is suitable for Volkswagen and Audi Group for 16v 1.4, 1.6 engines fitted to Volkswagen, Audi, Skoda and Fiat. OEM ref. T10017.OEM Ref T10017.Applications include: VAG 1.4/1.6 16v engines. Also used on Fiat engines. Engine code BAG 1.6 direct injection (petrol )Removes and installs.Engine specific tool vital to ensure the correct alignment of main seal house crankshaft sensor.Seal housing carries the crankshaft sensor mounting."
Price: 254.94 |
| "Laser Tools 4762 Diesel Injector Puller Set" |
| "This 3 piece Diesel Injector Puller Set comes complete with an extractor key for removing the inner part of the Bosch injectors It is also suitable for removing injectors without the use of a slide hammer and without removing the cylinder head on Mercedes-Benz Sprinter | E-Class | C-Class manufactured from 2000 onwards. Supplied in blow mould case for storageComplete with an extractor key for removing the inner part of the Bosch injectors.Perform the task without resorting to using a sliding hammer.Storage case provided.Also suitable for removing the injectors without removing the cylinder head on Mercedes-Benz Sprinter | | E-Class | C-Class | Time saver."
Price: 104.19 |
| "Laser Tools 4790 Ball Joint Remover 39mm Chrome Molybdenum" |
| "This Commercial Ball Joint Remover is useful on most trucks including Scania, Mercedes-Benz, Man etc.Commercial Ball Joint splitter is useful on most trucks including Mercedes-Benz, Man etc.Maximum capacity of 39mm. Screw depth of 120mm. Nut width: 26mm, weight 2.45kgs. Internal width 80mm, Internal height 59mm, Throat width 39mmInvaluable for removing the ball joints on track rod ends, steering knuckles etc Manufactured from Chrome Molybdenum - ALWAYS GREASE THREADED BAR BEFORE USE."
Price: 141.49 |
| "Laser Tools 4768 Fuel Tank Sender Wrench 3 Leg 75 - 160mm" |
| "This 3 leg Fuel Tank Sender Wrench is designed for the removal of the retaining ring on the fuel tank sender units. The size ranges from 75mm to 160mm which will cover many makes and models3 LegThe size ranges from 75mm to 160mmDesigned for removal of the retaining ring on the fuel tank sender unitsSuitable for many modern makes and modelsTime saver"
Price: 23.57 |
| "Laser Tools 4793 Rear Suspension Bush Tool - Vauxhall High tensile steel" |
| "For removing and replacing the rear upper and lower bushes on trailing arm suspensions for Vauxhall Vectra models 1.6, 1.8, 2.0 (95-) and 2.5 (96-). Suitable for use insitu, without removing the trailing arm assembly from the vehicle. Efficient nut and thrust bearing assembly Bar made from high tensile steel for extra strength. ALWAYS GREASE THE THREAD BEFORE AND AFTER USE. DO NOT USE WITH AIR TOOLS.For removing and replacing the rear upper and lower bushes on trailing arm suspensions.For Vauxhall Vectra models 1.6, 1.8, 2.0 (95-) and 2.5 (96-).Suitable for use insitu, without removing the trailing arm assembly from the vehicle.Efficient nut and thrust bearing assembly (Part No. 1816).Bar made from high tensile steel for extra strength (Part No. 1815). Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)"
Price: 102.05 |
| "Laser Tools 4861 Exhaust Expander Set 3pc" |
| "This set of three exhaust expanders enable the pipe to be extended parallel to allow additional tail-pipes or accessories to be clamped successfully. The three tools cover exhausts with diameters 30-44mm, 38-62mm and 54-87mm and will extend the diameter uniformly and also remove any other damage that may have occurred. Supplied in a blow mould case for storage.The three tools cover mild steel exhausts with diameters 30-44mm, 38-62mm and 54-87mm.Enable the pipe to be expanded to allow additional tail-pipes or accessories to be clamped successfullyThe tools will expand the diameter uniformly and also remove any other damage that may have occurred.Can be used on a mild steel maximum thickness of 1.2mm pipe. Hexagon shaft is turned with 16mm spanner Supplied in a blow mould case for easy storage"
Price: 93.59 |
| "Laser Tools 4760 Diesel Injector Removal Set - Delphi/Bosch" |
| "Specifically designed for removing Delphi/Bosch diesel injectors. Adaptors can also be used with an air tool to loosen the injectors by vibration. Set of 2 adaptors plus a special tool for removing the internal part of Bosch injectors.Specifically designed for removing Delphi/Bosch diesel injectorsAdaptors can also be used with an air tool to loosen the injectors by vibrationSuitable for use with the Laser Slide Hammer with 5/8"" UNF thread - Part No. 4811.Includes 3 adaptors and special tool for removing the internal part of the Bosch injectors.Kit includes a M20 x 5/8 UNF Slide hammer adaptor"
Price: 69.09 |
| "Laser Tools 4789 Ball Joint Extractor 30mm" |
| "This Commercial Vehicle Ball Joint Extractor can be used on light trucks including BMW (E39), Mercedes-Benz W203 | W211 | W210 | W220 | W221 and various other models. Commercial vehicle ball joint extractor suitable for use on light trucks.Suitable for use on: BMW (E39), Mercedes-Benz W203 | W211 | W210 | W220 | W221 and various other models. Can also help with the removal of the Track Rod End Arm and light truck ball joints.Size: Maximum capacity 30mm, Screw depth of 110mm, Nut width 19mm, Weight 0.95kgCoated in tough black epoxy coating. Always grease threaded bar before use"
Price: 69.33 |
| "Laser Tools 4773 Engine Service Tool - 1.3 JTD/CDTi/TDCi/DT/DTE5" |
| "Fiat 1.3 JTD | Vauxhall Opel 1.3 CDTi | Ford 1.3 TDCi | Suzuki Z13DT engines plus Citroen/Peugeot F13DTE5 (FHZ) engines This set of tools allows the user to check and adjust the Camshaft timing, remove and replace the Cam chain and perform complete engine rebuilds whilst maintaining the correctIncludes: Flange Holding Wrench | 3 bolts 1/2""D OEM Ref: 1 871 000 200 303-1469 | KM 661-C.Timing Chain Tensioner lever + 2 bolts 1 870 900 400.Camshaft Locking Tool (2) 1 871 000 900 | 1 860 985 000, 303-1472 09917 68610, EN 46781, 0104-AFlywheel Alignment Pin & Spring 09912 38300, EN 46785.Tensioning Pin KM6130 & Crankshaft Timing Position Tool 1 870 900 300, 0104-C Made in Sheffield"
Price: 144.35 |
| "Laser Tools 4880 Oil Filter Wrench - 64.5mm x 14 Flutes" |
| "An aluminium Oil Filter Wrench specifically designed for use on Toyota (07-08) 3.5L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)An Oil Filter Wrench suitable for use on Toyota | Lexus 3.5L V6 Engines plus /Toyota Prius 1.7 2010Designed for use on Toyota (07-08) 3.5L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)Oil Filter wrench size: 64.5mm x 14 flutes3/8""DRemoves filters without damage to the filter housing"
Price: 19.45 |
| "Laser Tools 4780 Rear Axle Bush Tool - BMW 5 Series Saloon Only E39 High tensile steel" |
| "Rear Axle Carrier Bush Tool for BMW 5 Series (Saloon only) E39. This extraction and replacement tool enables easy changing of the rear axle carrier mounting bushes without removing the unit from the vehicle. NOT TO BE USED WITH IMPACT TOOLS. Made in Sheffield.Rear Axle Carrier Bush Tool for BMW 5 Series (Saloon only) E39.This extraction and replacement tool enables easy changing of the rear axle carrier mounting bushes without removing the unit from the vehicle.Bar made from high tensile steel for extra strength (Part No 1812). Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)Efficient nut and thrust bearing assembly (Part No 1813).NOT TO BE USED WITH IMPACT TOOLS."
Price: 259.61 |
| "Laser Tools 4894 Stud Extractor 19-25mm 1/2""D" |
| "This Stud Extractor in 1/2""D ranges from 19-25mm. This tool will also remove damaged nuts. Stud Extractor in 1/2""DRanges from 19-25mmThis tool will also remove damaged nutsDue to the nature of the task the jaws are consumableSpare jaws available - Part No 1898"
Price: 103.83 |
| "Laser Tools 4757 Crows Foot Wrench Set 10pc Chrome Molybdenum" |
| "Part of the Laser Tools Spanner rangeIdeal where access is restrictedSizes: 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 mm in 3/8""3/8""DManufactured from Chrome Molybdenum.Presented in a blow mould storage case."
Price: 43.84 |
| "Laser Tools 4836 Camshaft Alignment Tool - Subaru 2.5 Aluminium" |
| "Camshaft alignment tool for 2.5 DOHC ( non turbo) engines. Manufactured from aluminium to original Subaru reference 499207300.Camshaft Alignment Tool for 2.5DOHC (Non-turbo) engines.Manufactured from aluminium.Manufactured to original Subaru reference 499207300.One bar required to do the job.Time saver."
Price: 59.11 |
| "Laser Tools 4779 Rear Trailing Arm Suspension Bush Tool - BMW 3 Series" |
| "This Rear Trailing Arm Suspension Bush Tool is suitable for BMW 3 Series - (E36 | E46 | E46 Compact) and replaces the worn bushes without the removal of the trailing arm. The bar is manufactured from high strength steels, and the centre screw and thrust nut design enhance the ease of use. NOT SUITABLE FOR USE WITH IMPACT TOOLS. Made in SheffieldThis Rear Trailing Arm Suspension Bush Tool is suitable for BMW 3 Series - (E36 | E46 | E46 Compact).Replaces worn bushes without the removal of the trailing arm.The centre screw is manufactured from high strength steels (Part No 1792). Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)The thrust nut design enhance the ease of use. (Part No 1803).NOT SUITABLE FOR USE WITH IMPACT TOOLS."
Price: 173.82 |
| "Laser Tools 4882 Crankcase Separator" |
| "This product is fully adjustable and can be used on a variety of engines. 4 Mounting bolts: M8 x 1.25 x 90mm long, M6 x 1.0 x 65mm long, M6 x 1.0 x 57mm long, M6 x 1.0 x 49mm longThreaded bar M14 x 1.5 x 180mm long (replacment Part 1876)Fully adjustable.Spare parts available for the 6 & 8mm bolts and threaded bars. Part 1875 for M8 x 95mm, Part 1876 for M6 x 65mm, Part 1916 for M6 x 57mm, Part 1918 for M6 x 49mmSupplied in a blow mould case for storage."
Price: 86.59 |
| "Laser Tools 4725 Hazard Warning Tape 33m x 50mm" |
| "Hazard warning tape in highly visual Yellow and Black. 33m x 50mm (100ft x 3in). For use with Laser Floor Tape Dispenser (4709).33m (100ft) x 50mmHigh visibility yellow and blackCan be used with laser floor tape dispenserIdeal for use around vehicle liftsAlso great to use in other hazardous areas"
Price: 4.71 |
| "Laser Tools 4884 Air Impact Deep Socket 52mm Chrome Molybdenum" |
| "This 52mm Deep Impact Socket has been introduced for use on Land Rover Classic, Discovery, Defender (83-) and most other Land Rovers registered after 1970. Manufactured from Chrome Molybdenum for strength and in 1/2""D.Air Impact Deep Socket52mm 6pt (Single Hex) 1/2"" DriveIntroduced for use on Land Rover Classic, Discovery, Defender (83-) and most other Land Rovers registered after 1970.46mm Drive Depth, 56mm Internal Depth, 69mm External Dia.Chrome Molybdenum"
Price: 18.86 |
| "Laser Tools 4896 Torque Bar Socket 33mm 600nm Chrome Molybdenum" |
| "This 1""D Torque bar torques to 600Nm and with its extra long shaft is ideal for reaching deep seated nuts. Torque Bar Socket 33mm x 300mm.This 1""D Torque bar torques to 600Nm (+/-10%) A standard torque wrench should always be applied to ensure the correct torque is achieved.Complete with extra long shaft is ideal for reaching deep seated nuts.Made from Chrome Molybdenum Steel.Designed to allow the operator to quickly run up wheels nuts with an impact gun without fear of overtightening."
Price: 94.47 |
| "Laser Tools 4846 Specialist Socket Set - Mercedes Benz Chrome Molybdenum" |
| "Castellated Socket Set 1/2""D. For use on Mercedes-Benz differentials, front axles, wheel bearings, rear axle drive flange. Applications: G Class (W460/W461/463/W116/W123/W107/W114/W115/W116. Packed in blow mould case.5 pc x 1/2""D For use on Mercedes-Benz differentials, front axles, wheel bearings, rear axle (W126) drive flangeApplications include: G Class (W460/W461/463/W116/W123/W107/W114/W115/W116Supplied in a blow mould caseManufactured from Chrome Molybdenum"
Price: 95.83 |
| "Laser Tools 4895 Torque Bar Socket 32mm 450Nm Chrome Molybdenum" |
| "This 1""D Torque bar torques to 450Nm and with its extra long shaft is ideal for reaching deep seated nuts. A Torque Bar Socket 32mm x 300mm.This 1""D Torque bar torques to 450Nm (+/-10%).Complete with an extra long shaft is ideal for reaching deep seated nuts.A standard torque wrench should always be applied to ensure the correct torque is achieved. Made from Chrome MolybdenumDesigned to allow the operator to quickly run up wheels nuts with an impact gun without fear of overtightening."
Price: 85.47 |
| "Laser Tools 4835 Hub Nut Socket 54mm - Toyota" |
| "Primarily introduced as a standard Hub Nut socket with extended depth for deeply recessed hub nuts. However the tool can also be used to adjust the free play in wheel bearings on Toyota Landcruiser 40/60/70/80/100 Series plus Nissan Patrol Y60/GQ/MQ/MKExtended depth for deeply recessed hub nutsCan be used to adjust the free play in wheel bearings on Toyota Landcruiser 40/60/70/80/ 100 Series plus Nissan Patrol Y60/GQ/MQ/MK54mm 6pt (Single Hex)1/2"" Drive25mm Drive Depth, 165mm Depth, 68mm External Dia."
Price: 29.03 |
| "Laser Tools 4883 Hub Nut Socket Set 5pc Bi-Hex Chrome Molybdenum" |
| "Five Hub Nut sockets in one set specifically for use on Volkswagen Audi Group vehicles and manufactured from Chrome Molybdenum for strength. 24mm - Volkswagen: Touran and Passat. 30mm - Volkswagen: Golf IV, Polo, Beetle, Audi: TT, Skoda: Superb, Fabia, Octavia. 32mm - Volkswagen: Touareg. 33mm - Various Hub and Wheel Nuts. 36mm - Volkswagen: Polo, Golf Plus 1.8 Tdi, Seat Ibiza plus BMW 3/5/7 Series Z3/M3. Supplied in a metal case.A 5 piece 1/2""D Bi-Hex Hub Nut Socket Set.Specifically designed for use on Volkswagen Audi Group vehicles.Chrome Molybdenum.24mm = 35mm Drive Depth, 65mm Internal Depth, 34mm external Dia. 30mm = 37mm Drive Depth, 62mm Internal Depth, 42mm external Dia. 32mm = 36mm Drive Depth, 61mm Internal Depth, 44mm external Dia. 33mm = 35mm Drive Depth, 62mm Internal Depth, 45mm external Dia. 36mm = 37mm Drive Depth, 59mm Internal Depth, 50mm external DiaSupplied in a metal case."
Price: 79.48 |
| "Laser Tools 4843 Diesel Injector Nozzle Sockets 1/2""D 4pc Chrome Molybdenum" |
| "This 4pc 1/2""D diesel injector nozzle socket set is primarily introduced for Siemens and Bosch injectors. Sizes: 25mm | 27mm | 29mm | 30mm. Applications include Peugeot and Citroën with 2.0 engines.Applications include Peugeot and Citroën with 2.0 engines1/2""Drive.Primarily introduced for Siemens and Bosch injectors.Sizes include: 25 | 27 | 29 | 30mm.Manufactured from Chrome Molybdenum"
Price: 69.39 |
| "Laser Tools 4855 Brake Caliper Cleaning File" |
| "Designed for the removal of brake dust, corrosion and the build up of road dirt from the brake caliper. Extra slim style (10mm) especially useful on Japanese manufactured vehicles. Reverse blade doubles as a scraper for more stubborn residue. Non-slip handle with thumb pressure points. Flat 155mm parallel blade with diagonal coarse grooves to prevent clogging.Designed for the removal of brake dust, corrosion.Extra slim style (10mm).Extra slim style (10mm).Reverse blade doubles as a scraper for more stubborn residue.Flat 155mm parallel blade with diagonal coarse grooves to prevent clogging."
Price: 15.83 |
| "Laser Tools 4892 Oil Filter Wrench - 63-101mm Chrome Steel Legs" |
| "Removes and tightens oil filters ranging from 63.5mm to 101mm Removes and tightens (turns clockwise and anti-clockwise)Driven by 3/8""D or 1/2""D accessories.Can also be tightened using a 21mm socket or spanner.Legs manufactured from hardened Chrome Steel. (Inside measurement 28mm)Simply remove 1/2""D adaptor to reveal 3/8""D."
Price: 17.23 |
| "Laser Tools 5005 Butane Gas Torch" |
| "Butane powered, hand held torch with piezo electric ignition and adjustable heating control. Suitable for heating and shrinking.Butane powered, piezo ignition.Adjustable heat control.Suitable for heating and shrinking.Portable.Storage case and sponge complete the set."
Price: 26.07 |
