| "Genuine SEALEY ECS300 | Electronic Charger Starter 45/300A 12/24V" |
| "Suitable for 12V & 24V electrical systems. Fully electronic, microprocessor controlled. Suitable for Gel, Lead Acid, Lead Calcium, Silver Calcium as well as stop/start batteries. Up to 10 analysis and charge phases. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Surge and spike protection during charging and starting."
Price: 728.48 |
| "Genuine SEALEY EFS101 | Exhaust Fume Extraction System 230V - 370W - Single Duct" |
| "Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port. Ideal for bikes, cars and car derived vans. Requires installation onto workshop wall and ducting to expel exhaust gases. Does not include electrical switch gear. Ideal for smaller garages and workshops where space is limited. Single hose configuration."
Price: 1630.22 |
| "Sealey ECS500 Engine Chain Sling 500kg Capacity" |
| "Welded steel chain suitable for use with any engine crane. Self-securing locking link allows correct balance of load up to 500kg. Secure to engine with fixing plates which are included. Model No. ECS500"
Price: 38.34 |
| "Genuine SEALEY EC97 | Emergency Fuel Transfer Pump" |
| "Easy-to-use compact syphon pump with self-priming feature, suitable for low viscosity oils and non-aggressive chemicals."
Price: 10.61 |
| "Genuine SEALEY EC9434 | Jiggle Syphon Ø3/4 ID Hose" |
| "Syphon type drainer with jiggle action. Simply move hose up and down in vertical position to start flow. Supplied with a Ø3/4 ID 2mtr long petrol hose."
Price: 13.16 |
| "Genuine SEALEY ECS650 | Electronic Charger Starter 100/650A 12/24V" |
| "Suitable for 12V & 24V electrical systems. Fully electronic, microprocessor controlled. Suitable for Gel, Lead Acid, Lead Calcium, Silver Calcium as well as stop/start batteries. Up to 10 analysis and charge phases. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Surge and spike protection during charging and starting."
Price: 1131.37 |
| "Genuine SEALEY EFS07 | Exhaust Fume Extractor with 3mtr Ducting" |
| "Features soft rubber cylindrical cone to suit most exhausts. Adjustable height for use on small cars or commercial vehicles. Air inlet valve creates vortex within extractor to ensure all fumes are dispersed (requires air supply). 1.2mtr Body length with additional 3mtr flexible ducting. Mounted vertically on trolley with integral duct compartment for easy manoeuvrability and compact storage."
Price: 524.69 |
| "Genuine SEALEY EC94 | Jiggle Syphon Ø1/2 ID Hose" |
| "Syphon type drainer with jiggle action. Simply move hose up and down in vertical position to start flow. Supplied with a Ø1/2 ID 1.75mtr petrol hose."
Price: 9.58 |
| "Genuine SEALEY EC95 | Emergency Car Opening Kit" |
| "Designed for the US market, this kit will open a comprehensive range of European and Japanese cars. Supplied in pouch. For distribution to bona fide vehicle dealers and repair centres only."
Price: 35.47 |
| "Genuine SEALEY ER/MS/66 | Tie Cord Polishing Bonnet Ø180mm" |
| "Suits all makes of electric and air polishing machines. Uses 100% pure new wool pile to obtain a professional deep polishing effect. Made in UK."
Price: 12.14 |
| "Genuine SEALEY ER150P | Car Polisher Ø150mm 60W/230V" |
| "Random orbital polisher with Ø150mm 3-ply foam pad and two polishing bonnets. Smooth operation provides even buffing/polishing with no hot spots. Impact resistant ABS housing with twin grips. Supplied with 4mtr cable and BS approved plug. CE approved."
Price: 46.47 |
| "Sealey ES300A Engine Support Beam 300kg Aluminium" |
| "Min./Max. Width: 180/1400mm. Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Lightweight aluminium, weighs only 8.8kg, making it easy to manoeuvre without compromising the maximum load capacity. Aids with the removal of gearboxes and transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length of chain. Model No. ES300A"
Price: 122.04 |
| "Sealey ES350 Engine Stand 350kg" |
| "Accepts wide variety of engines and transmissions. Head swivels through 360°. Swivel castors. Fully adjustable mounting arms. Model No. ES350"
Price: 84.77 |
| "Sealey ES750 Exhaust Support Stand 750kg Capacity" |
| "Screw adjustment with spinner nut. Ball bearing thrust race. Removable base. Min./Max. Height: 1390/2060mm. Model No. ES750"
Price: 129.81 |
| "Genuine SEALEY ER230P.TB | Terry Bonnet 230mm for ER230P & CP2518" |
| "Suitable for Polishers Model No's ER230P, CP2518."
Price: 6.65 |
| "Genuine SEALEY ER230P.WB | Synthetic Fleece Bonnet 230mm for ER230P & CP2518" |
| "Suitable for Polishers Model No's ER230P, CP2518."
Price: 6.65 |
| "Sealey ES600 Engine Support Beam 600kg Heavy-Duty" |
| "Suitable for heavy engines including 6-cylinder variants. Supports engine during engine mounting replacement. Two rubber covered feet support the beam. Third, height adjustable foot, rests on front of vehicle. Two short lifting chains. Model No. ES600"
Price: 176.43 |
| "Sealey ES550 Engine Stand 550kg" |
| "Accepts wide variety of engines and transmissions. Head swivels through 360°. Swivel castors. Fully adjustable mounting arms. Model No. ES550"
Price: 126.48 |
| "Genuine SEALEY ES/3553 | Spot Welding Electrode Sharpener" |
| "Ratchet action electrode sharpener, keeps tips to optimum profile for maximum weld penetration. Recommended for all portable spot welders."
Price: 114.38 |
| "Sealey ES601 Engine Support Beam Cross Beam 500kg Capacity" |
| "Capacity: 500kg. Designed to support and accurately position engines during maintenance operations. Ideal for supporting the engine whilst replacing anti-vibration mountings and certain body panels. This model has the additional advantage of a 360° adjustable rotating cross beam to enable a greater range of support options when in use. Aids with the removal of gearboxes and transmissions. Supplied with two screw hook mechanisms: Lengths - 410/320mm. Model No. ES601"
Price: 188.64 |
| "Sealey ES300 Engine Support Beam 300kg" |
| "Min./Max. Width: 585/1580mm. Supports and accurately positions engine. Ideal for replacing anti-vibration mountings. Aids the removal of gearboxes and transmissions. Model No. ES300"
Price: 94.29 |
| "Genuine SEALEY ER230P | Car Polisher Ø230mm 110W/230V" |
| "Random orbital polisher with Ø230mm 5-ply foam pad and two polishing bonnets. Smooth operation provides even buffing/polishing with no hot spots. Impact resistant ABS housing with 360° grip. Supplied with 4mtr cable and BS approved plug."
Price: 56.87 |
| "Sealey ES900F Folding Engine Stand 900kg" |
| "Size (W x L x H): 820 x 1105 x 910mm. Head swivels through 360°. Fully adjustable mounting arms. Swivel castors. Foldable legs. Model No. ES900F"
Price: 235.26 |
| "Genuine SEALEY ER150P.WB | Synthetic Fleece Bonnet 150mm for ER150P" |
| "Suitable for Polisher Model No. ER150P."
Price: 4.49 |
| "Sealey ES502 Engine Support Beam 500kg Capacity Double Support" |
| "500kg Capacity. Min./Max. Width: 585/1580mm. Designed to support and accurately position engines during maintenance operations. Ideal for supporting the engine whilst replacing anti-vibration mountings and certain body panels. Aids with the removal of gearboxes and transmissions. Supplied with two short lengths of chain. Model No. ES502"
Price: 135.36 |
| "Sealey ES500 Engine Support Beam 500kg" |
| "Min./Max. Width: 1120/1910mm. Supports and accurately positions engine. Ideal for replacing anti-vibration mountings. Aids the removal of gearboxes and transmissions. Model No. ES500"
Price: 117.6 |
| "Genuine SEALEY ER1700PD | Polisher Digital Ø180mm 1100W/230V Lightweight" |
| "Powerful 1100W motor enclosed in a lightweight housing. Maintains high torque levels at low speeds, ideal for polishing. Digital display for variable speed control from 1000-3000rpm, stepping-up in 500rpm increments. Features a slide button on/off switch allowing for a smooth comfortable main handle grip. Spindle lock for fast and easy pad/foam head changes. Choice of two side handles - traditional or over-the-top style. Supplied in storage case."
Price: 130.94 |
| "Sealey ER230P.BP Backing Pad 230mm for ER230P" |
| "Suitable for ER230P. Model No. ER230P.BP"
Price: 11.94 |
| "Sealey ES450 Engine Stand 450kg" |
| "Accepts wide variety of engines and transmissions. Head swivels through 360°. Swivel castors. Fully adjustable mounting arms. Model No. ES450"
Price: 105.95 |
