|
|
"Vestil Wheel Riser - Aluminum, 72 Inch x 18 Inch W x 9 7/8 Inch H, Model ATWR-18-10-72" |
"Elevates semi-trailers to loading docks for maximum serviceability during loading and unloading operations. Sold individually. U.S.A. Drive Surface Width in. 18, Load Capacity lbs. 15,000, Material Type Aluminum, Ramp Length in. 72, Ramps qty. 1, Tire..."
Price: 699.99
|
|
"Vestil AC Powered Lift Jib Crane - 1500-Lb. Capacity, Model WTJ-E-15-3-AC-CSA" |
"The Vestil AC Powered Lift Jib Crane is designed for material handling applications on docks, in warehouses or in truck beds. This lift jib crane is the economical answer to your material handling needs. Intermittent use crane features rotation hand..."
Price: 2799.99
|
|
"Vestil DC Powered Lifter Jib Crane - 400-Lb. Capacity, Model VAN-J-DC, Blue" |
The Vestil DC Powered Lifter Jib allows you to lift items from the ground to van floor height and then rotate into cargo area. Battery powered 12V winch includes 46ft. cable and remote hand control with 8ft. cord. Unit is designed for vertical lifting...
Price: 689.99
|
|
"Vestil Hydraulic Drum Dumper - Stationary, 750-lb. Capacity, 72 Inch Dump Height, Model HDD-72-7-S" |
"Stationary hydraulic drum dumper works with 55- and 30-gallon plastic, steel and fiber drums. U.S.A. Material Type Steel, Chute Rotation Clearance in. 157 1/4, Dimensions L x W x H in. 92 x 36 x 95 1/2, Drum Material Type Plastic, steel, and fabric,..."
Price: 3474.99
|
|
"Vestil Hydraulic Drum Dumper - Portable, 750-lb. Capacity, Dump Height, Model HDD-48-7-P" |
"Portable hydraulic drum dumper works with 55- and 30-gallon plastic, steel and fiber drums. U.S.A. Caster Size in. 8 x 3, Caster Type Rigid and swivel, Chute Rotation Clearance in. 96, Dimensions L x W x H in. 71 1/2 x 36 x 72 1/2, Drum Material Type..."
Price: 3109.99
|
|
"JET Lever Hoist -1-Ton Capacity, 5ft. Lift, Model JLH-100WO-5" |
"This JET Lever Hoist is designed for safety, reliability, and durability in severe industrial environments. Patented handle design allows for extra clearance between operator's hand and load chain. The enhanced ergonomic grip allows for greater..."
Price: 390
|
|
"Vestil Adjustable Height Aluminum Gantry Crane - 15-Ft. I-Beam,000-Lb. Load Capacity, Model AHA--15-10" |
The Vestil Adjustable Height Aluminum Gantry Crane with casters is lightweight yet rigid and sturdy. The all-aluminum construction makes it corrosion resistant and perfect for outdoor use. The lightweight I-Beam allows height adjustment without the...
Price: 4919.99
|
|
"Norton Grinding Wheel - 6 Inch x 1 Inch, Brown Aluminum Oxide, 150 Grit" |
"The Norton Gemini Brown Aluminum Oxide Grinding Wheel is a good choice for all general-purpose bench and pedestal grinder applications. Quality, brown aluminum oxide wheel is ideal for small job shops and a variety of general-purpose applications,..."
Price: 13.99
|
|
NorTrac Power Pack Wheel Kit - Fits.3 Gal. Power Pack |
"The NorTrac Power Pack Wheel Kit is strong and sturdy with a 3/16 in. steel bracket that bolts onto the 10.3 gal. NorTrac Power Pack with no disassembly or drilling required Item# 245001, sold separately. Assembled in U.S.A. Reservoir Capacity 10 3/10..."
Price: 129.99
|
|
"Prince Tie-Rod Cylinder - 3000 PSI, 2/2 Inch Bore, 16 Inch Stroke, 1/4 Inch Shaft" |
"The Prince Tie-Rod Cylinder is made to handle the most demanding applications. With 70 plus years of American-made know-how they use a high-strength ductile iron piston, butt, gland, and clevis, plus urethane seals in a honed tube that allow them to..."
Price: 199.99
|
|
"Ingersoll Rand Rotary Screw Compressor - 7.5 HP, 460 Volt/3-Phase, 27.5 CFM @ 115 PSI, 80-Gallon Tank, Model 48670905" |
"Quiet operation 69dBA complements the fit-anywhere footprint of this Ingersoll Rand rotary screw air compressor for installation and operation within limited workspaces. Vertically stacked internal components reduce the compressor footprint by 20,..."
Price: 6329.99
|
|
"Homak 20-Gallon Portable Parts Washer, Model RD00820290, Red" |
"The Homak 20-Gallon Portable Parts Washer will roll to wherever you need it, on four 4in. casters, 2 with wheel locks to keep it in place while you work. Constructed of solid steel with red powder-coat finish for many years of leak-free service. This..."
Price: 199.99
|
|
"Milwaukee M18 CPIW Tool Boot, Model 49-16-2758" |
"The Milwaukee M18 CPIW Tool Boot is made for use with Milwaukee M18 compact impact wrenches, Models 2658-20 and 2659-20. Form-fitting, lightweight design protects the tool and work surface while adding minimal size and weight to the tool. Works With..."
Price: 24
|
|
"Husqvarna Wet Diamond Blade for Concrete - 14 Inch Diameter, Model Banner Line Blue, 200B, 14 Inch" |
"Husqvarna general purpose wet-cutting diamond blade is designed for 5-65 HP flat concrete saws. Offers good life and cutting speed. U.S.A. Recommended Use Soft to medium-hard aggregate, Blade Type Segmented, Blades qty. 1, Cutting Styles Wet, Blade..."
Price: 279.99
|
|
"Campbell Hausfeld Two-Stage Air Compressor - 7.5 HP, 24.3 CFM @ 175 PSI, 208-230/460 Volt Three Phase, Model CE7001" |
"The Campbell Hausfeld Shop Air Series compressor is ideal for general compressed air needs, including machine shops, dry cleaners, automotive repair facilities, woodworking shops, or general industrial applications. Features cast iron, 2-stage pump for..."
Price: 1899.99
|
|
"AIRCAT High Performance Nibbler - 2600 SPM, Model 6330" |
"The AIRCAT High Performance Nibbler delivers a small 3/16in. turning radius to operate in tight areas. Operates at 2600 strokes per minute for fast cutting. Air Consumption CFM 3.5, Air Inlet Size in. NPT 1/4, Case Included No, Cuts Per Minute CPM..."
Price: 99.99
|
|
"AIRCAT Low Weight Impact Wrench - 1 Inch Drive, 1,700 Ft.-Lbs. Torque, Model 1891-1" |
"The AIRCAT 1in. Low Weight Impact Wrench is built with a hard-hitting twin hammer mechanism that delivers 1,700 ft.-lbs. of max. torque for tough fastening jobs. Angled air inlet avoids hose from catching on ground. Comes with a reliable bolt-on assist..."
Price: 549.99
|
|
"AIRCAT Extended Impact Wrench -/2 Inch Drive, 725 Ft.-Lbs. Torque, with 2 Inch Anvil, Model 1460-XL-2" |
"The AIRCAT 1/2in. Extended Impact Wrench with 2in. Anvil is engineered with a hard-hitting twin hammer mechanism, delivering an impressive 725 ft.-lbs. of max. torque. Wrench is designed for tire shops operating with up to 125 PSI air pressure...."
Price: 149.99
|
|
"Klutch MIG Welding Gun Kit - 32-Pcs., Tweco Style" |
The Klutch 32-Pc. MIG Welding Gun Kit fits welding products that use a Tweco Style 3 torch. The tip and nozzle kit is good to have on hand when nozzles or tips need to be replaced. This 32-pc. kit includes 30 tips and 2 nozzles. Designed for welders...
Price: 49.99
|
|
"Bosch Dual-Bevel Glide Miter Saw - 10 Inch, 15 Amp, Model CM10GD" |
"The innovative Bosch 10in. Dual-Bevel Glide Miter Saw features Bosch's patented Axial-Glide system, which delivers an unparalleled level of performance and a unique profile. Traditional sliding compound miter saws enable users to make wider cross cuts,..."
Price: 699.99
|
|
Klutch Professional Air Accessory Kit - 25-Piece |
"The Klutch 25-Pc. Professional Air Accessory Kit is a complete kit that is built to last. Accessories have anodized aluminum surfaces to prevent corrosion and wear for excellent durability. Adjustable in. No, Air Inlet Size in. NPT 1/4, Max. PSI 120,..."
Price: 29.99
|
|
NorthStar Air Compressor Start-Up Kit - Fits Item# 47501 |
Add an additional year to the limited warranty on the pump of your NorthStar reciprocating air compressor with the purchase and use of this air compressor start-up kit. Kit must be purchased at the same time as the compressor to receive the extended...
Price: 59.99
|
|
"Klutch Horizontal/Vertical Metal Cutting Band Saw - 4/2 Inch x 6 Inch, 3/4 HP, 120V" |
"This Klutch Horizontal/Vertical Metal Cutting Band Saw with powerful 3/4 HP, 120V motor cuts everything from brass and aluminum to rugged alloy and steel tools. Features a vertical cutting plate for small pipes. Includes blade and heavy-duty stand...."
Price: 299.99
|
|
"Edwards JAWS 60-Ton Ironworker - 3-Phase, 575 Volt, Model IW60-3P575" |
"The Edwards JAWS 60-Ton Ironworker is a versatile, robust machine. Features 4 available workstations including a dedicated coper notcher station, punch assembly, flat bar shear, and angle shear. ANSI B11.5-1988R02 compliant. ETL/UL approved controls...."
Price: 11903
|
|
"Quincy Extended Support and Maintenance Kit for Quincy QT HP Splash Lubricated Reciprocating Compressors, Model EWK-5" |
"Double your Quincy QT 15 HP, 120-gallon splash lubricated air compressor's one-year warranty to 2 years 'bumper-to-bumper' and triple the pump warranty to 3 years on-site parts and labor by purchasing this Extended Support and Maintenance Kit at the..."
Price: 469.99
|
|
"Ingersoll Rand Air Impactool - 1/2 Inch Drive, 6 CFM, 1,350 Ft.-Lbs. Torque, Model 2235TiMax" |
"The Ingersoll Rand 1/2in. Impactool Air Impact Wrench is a powerful, durable and reliable workhorse that can handle the toughest fastening tasks. Loosen the toughest bolts with 1,300 ft.-lbs. of nut-busting torque and 900 ft.-lbs. of reverse torque,..."
Price: 322.43
|
|
"Klutch Heavy-Duty English Wheel Kit - 28 Inch, Brown" |
"Klutch Heavy-Duty English Wheel Kit with stand is ideal for shaping, fabricating, and smoothing dents or welding seams in fenders, hoods and trunk panels. Handles sheet metal to 18-ga., and copper and aluminum to 14-ga. Common Usage Shaping,..."
Price: 329.99
|
|
"Klutch Benchtop Drill Press - 5-Speed, 10 Inch, 1/2 HP, 120V" |
"This Klutch Benchtop Drill Press is a heavy-duty unit featuring 5 speeds for versatility. The drill press combines power with precision and accuracy for exceptional results every time. Has a 1/2 HP, 120V motor with 5 speeds that generate 740-3,140 RPM...."
Price: 169.99
|
|
|
|