 |
| Navy Blue Thin Suspenders - Matte 3/4 Inch Wide |
| $14.95 |
| Navy blue thin suspenders in the perfect fashion width - thin but not too skinny and not too wide, just right! Pair...[Read More] |
 |
| Cobra Jack To Jack Mono X 4 Patch Lead 3m |
| "4 Way 1/4"" Mono Jack to 1/4"" Mono Jack Loom. Each Connector is Colour Coded. 3m Long. Cobra 4 way mono Jack to jack patch cable- 3m long with ident sleeves on all connectors.. audio loom-jack to jack audio loom-8 way jack to jack loom-patch lead"
Price:  |
| Cobra Jack To Jack Stereo Loom 8 Way Lead 3m |
| "8 Way Stereo 1/4"" Jack to 1/4"" Jack Loom. Each Connector is Colour Coded. 3m Long. Cobra 8-Way stereo jack to jack patch cable. Each connector has a coloured identifying sleeve and the overall cable length is 3 metres.. stereo loom-8 way stereo loom-jack to jack-patch lead"
Price:  |
| Cobra Jack To Jack Stereo X 4 Patch Lead 3m |
| "4 Way 1/4"" Stereo Jack to 1/4"" Stereo Jack Loom. Each Connector is Colour Coded. 3m Long. Cobra 4-Way stereo jack to jack patch cable. Each connector has a coloured identifying sleeve and the overall cable length is 3 metres.. audio loom-jack to jack audio loom-8 way jack to jack loom-patch lead"
Price:  |
| Cobra Jack To Phono RCA Loom 8 Way Lead 3m |
| "8 Way Phono/RCA to 1/4"" Mono Jack Loom. Each Connector is Colour Coded. 3m Long. Cobra 8-Way Phono/RCA to mono jack patch cable. Each connector has a coloured identifying sleeve and the overall cable length is 3 metres.. stereo loom-8 way stereo loom-jack to phono-jack to rca-patch lead"
Price:  |
| Cobra Jaw Microphone Clip |
| "Jaw/Clip Microphone Clip. For Mics up to 35mm Diameter. 3/8"" & 5/8"" Thread Adaptor SuppliedThread: 3/8"" & 5/8"" Mic Diameter: Up To 35mm. A jaw/clip type microphone holder. Suitable for microphones up to 35mm diameter and supplied with a 3/8"" & 5/8"" thread adaptor.. Microphone Clip-mic clip"
Price:  |
| Cobra Keyboard Stool Bench |
| 3 Stage Adjustable Height. Soft Padded Leather Seat. Strong Metal Construction. Perfect For Adults and Children. Foldable Design. Anti Slip FeetHeight Adjustment: 475/505/530mm Max Load: 100kg Seat Dimensions: 460 x 310 x 40mm Weight: 3.1. A well made keyboard bench with three separate height settings which ensure a good fit from children up to adults. The padded seat is designed for comfort while you play and is supported by a sturdy X-type frame. This bench folds flat for easy transportation- it's ideal if you're on the move at gigs or lessons.
Price:  |
| Cobra Laptop Stand |
| Strong Metal construction. Adjustable Height. Desk Mountable. Can be Clamped to Desks and Flight Cases. Adjustable Width. Suitable for most laptopsDimensions: 330 x 750 x 370-235mm Weight: 2.3kg. Easy access to your laptop- even when there's no space available. Multifunctional stand that can be placed on a table. If space is unavailable then simply clamp it to the vertical parts of your flight case or a table- the clamps will open to 48mm. Adaptable width with 4 extension adapters supplied- so the width can be 230- 260 or 285mm long. Durable and stable metal design in black finish.
Price:  |
| Cobra Lighting Bag For Flat Pars On A Bar (Short) 1400 x 360 x 150mm |
| Short Padded T-Bar Bag. Suitable For Flat LED Par Cans. Fits LS6 & CLS104 T-Bars. Shoulder Strap & Carry HandleDimensions: 1400 x 360 x 150mm Weight: 1.06Kg. A short padded bag for storing & transporting flat LED par cans while they are on a T-Bar. This bag is padded & has a carry handle and shoulder strap. Makes transporting & packing up quick and easy as cables can be left assembled on the T-bar. This padded bag cuts down the chance of damaging expensive lighting fixtures.. bag-par can bag-padded bag-lighting bag-led par can bag
Price:  |
| Cobra Lighting Controller Case |
| "For Lighting Or Audio. Sloping Front Face. Deep Back For Connectors. Strong ConstructionExternal Dimensions: :- 550 x 270 x 265mm Sloping Section: 352mm (4U) Max. depth of equipment: :- 160mm Weight: :- 7Kg. A small 19"" case for lighting or audio controllers with up to 4U (352mm) of panel height. Made from laminated plywood with full aluminium trim- with butterfly catches- rubber feet and strong handle. Supplied with rack screws.. flight case-19"" rack flight case-19"" Equipment Flight Case-stackable flight case"
Price:  |
| Cobra Lighting Stand 3.4 Metres |
| Strong Sturdy Lighting Stand. 4 Fixture T-Bar. Safety Pins For Extra Security. Black FinishMax Height: :- 3.4m Folded Length: :- 1.4m T-Bar::- 1.2m Max Load: :- 30kg. A 3.4 meter lighting stand supplied with T-Bar and screw accessories for fitting lights. This is a three stage stand with locking pins for extra security. Finished with a tough black paint- this is a durable and sturdy stand for supporting all types of suitable lighting equipment.
Price:  |
| Cobra Long Stand or T-Bar Bag 1700 x 360 x 150mm |
| Long Padded T-Bar Bag. Suitable For Flat LED Par Cans. Fits Our TB66 T-Bar. Shoulder Strap & Carry HandleDimensions: 1700 x 360 x 150mm Weight: 1.24Kg. A long padded bag for long stands or T-bar- with the light fitted. This bag is padded on all sides and has a shoulder strap and carry handle. Its a convenient way to store and transport lighting bars with the lights still attached or the lighting stands and accessories. A cost effective way of protecting delicate equipment without spending lots of money on a suitable flight case.. bag-par can bag-padded bag-lighting bag-led par can bag
Price:  |
| Cobra Metal Jack Plug Mono |
| Metal Body Jack. Cobra Quality. Strong Clamp. Easy To Solder Terminals. Cobra mono metal jack plug. A sturdy plug with an effective cable grip when used with Mic cable.. jack plug-mono jack plug
Price:  |
| Cobra Metal Jack Plug Stereo |
| Metal Body Jack. Cobra Quality. Strong Clamp. Easy To Solder Terminals. Cobra stereo metal jack plug. A sturdy plug with an effective cable grip when used with Mic cable.. jack plug-stereo jack plug
Price:  |
| Cobra Mic Stand Bag for Four Stands |
| Quick to Pack Up. Robust Design. Neat Storage SolutionDimensions: 1040 x 600mm (Unrolled) Dimension of Sleeves: 970 x 100 x 80mm Weight: 0.60g. Keep all your microphone stands together with this strong roll up bag. You can accommodate up to four stands- then roll and tie up the bag for easy transport and storage.. stand bag-Microphone Stand Bag
Price:  |
| Cobra Microphone Snake Lead On Reel 25m 2 Inputs |
| 25m Microphone Snake Lead. Supplied on a Reel. 4 Locking Female XLR Connectors. 2 Male XLR Connectors. All Connectors are Metal. Idents on Free EndsWeight: 4Kg. Cobra dual balanced microphone or signal cable on a drum. Four locking female connectors are fitted to the drum body and connected in parallel pairs. Metal male connectors are fitted to the free ends with ident tags. Lead length 25 metres.. XLR LEAD
Price:  |
| Cobra Microphone Snake Lead On Reel 25m 4 Inputs |
| 25m Microphone Snake Lead. Supplied on a Reel. 4 Locking Female XLR Connectors. 4 Male XLR Connectors. All Connectors are Metal. Idents on Free EndsWeight: 5.4kg. Cobra quad balanced microphone or signal cable on a drum. Four locking female connectors are fitted to the drum body. Metal male connectors are fitted to the free ends with identifying tags.. XLR CABLE
Price:  |
| Cobra Microphone Snake Lead On Reel 50m 1 Input |
| 50m Microphone Snake Lead. Supplied on a Reel. 2 Locking Female XLR Connectors. 1 Male XLR Connectors. All Connectors are MetalWeight: 4.1kg. Cobra balanced microphone or signal cable on a drum. Two locking female connectors are fitted to the drum body and connected in parallel. One metal male connector is fitted to the free end. Lead length 50 metres.. AUDIO CABLE
Price:  |
| Cobra Microphone Snake Lead On Reel 50m 2 Inputs |
| 50m Microphone Snake Lead. Supplied on a Reel. 4 Female XLR Connectors. 2 Male XLR Connectors. All Connectors are Metal. Idents on Free EndsWeight: 5.2kg. Cobra dual balanced microphone or signal cable on a drum. Four female connectors are fitted to the drum body and connected in parallel pairs. Metal male connectors are fitted to the free ends with ident tags. Lead length 50 metres.. XLR LEAD
Price:  |
| Cobra Mixer Bag 10mm Padding -365 x 365 x 90mm |
| Mixer or Controller Bag. 10mm Padding. Strong Zip. Padded Carry Handle. Shoulder Strap. Front Zip Pockets. Label HolderDimensions: 365 x 365 x 90mm Weight: 0.48kg. A cost effective and practical solution to protecting smaller mixers or other equipment. The 10mm padding keeps all sides scratch and dent free & offers a good degree of protection for both life on the road or in storage. With a well padded carry handle and shoulder strap- carrying from one venue to another is a breeze and the handy front zip pockets are ideal for carrying those smaller accessories- such as cables or connectors. For easy identification there is also an external label holder. This bag will fit a range of DJ controllers & audio mixers including; Native Instruments TRAKTOR KONTROL Z2 Alto LIVE802- LIVE1202 Behringer X1222USB- 1204USB Yamaha MG10- MG10XU- MG10XUF- MG12XUK Mackie PROFFX4V2- PROFX12V2 Soundcraft NOTEPAD-12FX. Cobra Mixer Bag for DJ Mixers and Other Such Equipment. mixer bag-dj controller bag-dj controller case
Price:  |
| Cobra Mixer Flight Case 10 Unit |
| 10U Mixer Flightcase. Strong Plywood Construction. Metal Rack Strips. Fixings IncludedExternal Dimensions: :- 405 x 265 x 495mm Sloping Section: 440mm 10U Max Depth of Equipment: :- 85mm Weight: :- 16kg. A sturdy mixer case with Steel ball corners and aluminium profiles- will fit 10U on the rack strip (with 10mm space for connectors)- 4 rubber feet- Includes fixings.. mixer case-flight case-mixer flight case
Price:  |
| Cobra Mixer Flightcase with Laptop Shelf |
| Strong Mixer Flight Case. Professional Butterfly Locks. Sliding Laptop ShelfSloping Section: 405mm (10U) Laptop Shelf: 510 x 280mm Dimensions: 575 x 590 x 360mm Weight: 16.14Kg. A sturdy Cobra mixer flight case complete with laptop shelf. 19 Inch rack equipment up to 10U will fit into the sloping section- with a maximum depth of 90mm at the front. The laptop shelf can be adjusted and locked into position with a metal pin on either side and has 2 Velcro straps to hold a laptop in place during transportation. Made from laminated plywood and finished with metal edging- stackable corners- strong catches and handles making this case a practical choice for many mobile applications. Supplied with plenty of cage nuts- bolts and washers for fixing equipment in place.. mixer case-flight case-mixer flight case
Price:  |
| Cobra Padded Acoustic Dreadnought Guitar Bag |
| Dreadnought Padded Bag. 3 Front Pockets. Backpack Straps. 2 Heavy Duty HandlesExternal Dimensions: 1150 x 430 x 120mm External Pocket Dimensions: 310 x 410 x 30mm 245 x 310 x 30mm 125 x 220 x 30mm Internal Length: 1090mm Internal Upper Width: 140mm Internal Lower Width: 420mm Internal Depth: 100mm All Sizes Are Approximate Weight: 0.98Kg. A soft padded gig bag for dreadnought guitars. Don't risk damaging a prized guitar- simply zip it up for transportation and use the rack sack straps to carry from gig to gig. There are 3 zip front pockets for leads- tuners- plectrums and more. A perfect bag to carry a guitar to school- college and gigs.. guitar bag-acoustic guitar bag-padded guitar bag-gig bag-acoustic guitar gig bag
Price:  |
| Cobra Padded Classic Guitar Bag |
| Suitable For Classic Guitars. Very Well Padded. Back Pack Straps. 3 Zip Pockets. 2 Strong HandlesExternal Dimensions: 1040 x 420 x 120mm External Pocket Dimensions: 410 x 320 x 30mm 310 x 250 x 30mm 220 x 130 x 40mm Internal Length: 1030mm Internal Upper Width: 130mm Internal Lower Width: 400mm Internal Depth: 100mm All Sizes Are Approximate Weight: 0.94Kg. A deluxe classic guitar bag- very well padded to keep your prize possession in pristine condition. Fitted with two strong carry handles and backpack straps. There are 3 zip pockets that are small- medium and large in size to keep all your accessories safely stored. The case is manufactured in black material with one pocket in red.. guitar bag-classical guitar bag-padded guitar bag-gig bag-classical guitar gig bag
Price:  |
| Cobra Padded Electric Guitar Bag |
| Padded Electric Guitar Bag. 10mm Padding. Ruck Sack Straps. 2 Strong Handles. 3 External PocketsExternal Dimensions: 1020 x 400 x 60mm External Pocket Dimensions: 410 x 320 x 30mm 320 x 255 x 40mm 220 x 130 x 30mm Internal Length: 1010mm Internal Upper Width: 125mm Internal Lower Width: 390mm Internal Depth: 40mm All Sizes Are Approximate Weight: 0.98Kg. A well padded electric guitar bag using 10mm padding for extra protection around all sides. There is 2 carrying options- either a strong rubber carry handle or adjustable ruck sack straps. Three zip pockets allow for plenty of accessories to be stored including strings- straps- tuners- cables and more. A perfect case for transporting delicate guitars to school- college or gigs.. guitar bag-electric guitar bag-padded guitar bag-gig bag-electric guitar gig bag
Price:  |
| Cobra Panel Speaker Socket |
| "Standard ""D"" Fitting Speaker Socket. Easy Solder Terminals. Suitable For High Usage. A panel mount 4 pole speaker socket with solder terminals.. speaker socket-panel mount speaker socket-4 pole speaker socket"
Price:  |
| Cobra Phono RCA To Phono RCA Loom 8 Way Lead 3m |
| 8 Way Phono/RCA to Phono/RCA Loom. Each Connector is Colour Coded. 3m Long. Cobra 8-Way stereo Phono/RCA to Phono/RCA patch cable. Each connector has a coloured identifying sleeve and the overall cable length is 3 metres.. stereo loom-8 way stereo loom-phono to phono-rca to rca
Price:  |
| Cobra Plastic Horn Flare 280 x 210mm |
| Plastic Horn Flare. For Bolt Compression Drivers. 4 Fixing Holes. Multiple Compresion Driver holesDimensions: 280 x 210 x 140cm Weight: 584g. Plastic horn flare for bolt on compression drivers. Suitable for new cabinet designs or a replacment for a Cobra CFR15 speaker.. speaker horn-spare speaker horn
Price:  |
| Cobra Rack Case 16U + 10U With Tables |
| "Practical Case & Table. Adjustable Angled Section. Suitable For 19"" Rack Equipment. Strong Laminated Ply Construction. High Quality fittings. CastersExternal Dimensions: 922 x 700 x 521mm Sloping section: 440mm (10U) Bottom Vertical Section: 704mm (16U) Max depth of equipment: 520mm Table Dimensions: 922 x 521 x 720mm Weight: :- 49Kg. An excellent mobile case with plenty of applications for stage and DJ work. The front and back lids are removable and can be clipped on to both sides of the case- making two work tables.. flight case-AUDIO EQUIPMENT CASE"
Price:  |
| Cobra Rack Case With 10U Top And 12U Bottom |
| "Complete Accessibility. Sloping Top. Front Facing Rack Space. Strong Laminated Ply Construction. High Quality fittings. Removable CastersBottom vertical Section: :- 528mm (12U) Sloping Section: :- 450mm (10U) Dimensions: :- 550 x 620 x 780mm :- (not including casters) Max depth of equipment: :- 500mm Weight: :- 33Kg. Complete rack case with removable front- top cover and hinged back. There is space to put 10 units of equipment on the top and 12 on the front face of the case. The top section hinges and locks in a sloping position. The rear hinged/removable door makes for easy cable access. Tough construction using laminated ply board and full aluminium trim. Supplied with castors. flight case-19"" rack flight case-19"" Equipment Flight Case"
Price:  |
| Cobra Radio Microphone Clip |
| "Microphone Clip for Radio Microphones. 3/8"" & 5/8"" ThreadThread: 3/8"" & 5/8"". A professional radio microphone Holder. Internal teeth for a more stable hold. Suitable for 3/8"" & 5/8"" threads.. Microphone Clip-mic clip"
Price:  |
