|
Sitemap
SomaLife
|
| |
| WESTWARD 2RUP2 Screw Extractor Spiral Flute Size #4 |
"Screw Extractor, Spiral Flute, For Removing Stud, Bolt, Screw and Nuts 7/16 to 9/16, For Removing Pipe 1/8 In, Size #4, Drill Size 1/4 In, Overall Length 3 In, Taper Length 1 In, Small End Dia 0.178 In, Large End Dia 0.299 In, Carbon Steel, Removing..."
Price: 3.42
|
|
| "PRECISION BRAND 16345 Shim Stock, Roll, Cold Low Steel, 0.0060 In" |
"Shim Stock Roll, Shim Material Steel, Grade 1008-1010, Shim Thickness 0.0060 In., Thickness Tolerance +/-0.0005 In., Shim Width 6 In., Width Tolerance +/-0.005 In., Shim Length 100 In., Length Tolerance +3/-0.250 In., Shim Temper Full Hard, Tensile..."
Price: 7.48
|
|
| "U51410.016.0002 Flat Washer, 18-8 SST, #8, PK50" |
"Flat Washer, Stainless Steel, Inch, Washer Material Grade 18-8, Fits Bolt Sizes #8, Washer Inside Dia. 3/16 In., Washer Outside Dia. 7/16 In., Thickness 0.049 In., Temp. (F) -58 Degrees to 302 Degrees , Washer Standards ASME B18.22.1, Package Quantity 50"
Price: 0.83
|
|
| "DIVERSIFIED FASTENING SYSTEMS GCPT56212 T Anchor, 5/16 x 2 1/2, PK4" |
"T-Anchor, Carbon Steel, Yellow Dichromate, Anchor Thread Size 5/16 In.-18, Usable Length 1 1/2 In., Screw Length 2-1/2 In., Size 5/16 x 2-1/2 In., Package Quantity 4"
Price: 13
|
|
| "Pan Head Sheet Metal Screw, 1 Long, 100-pack, U51660.016.0100" |
"Tapping Sheet Metal Screw, Pan Head, 18-8 Stainless Steel, Size #8, Length 1 In, Drive Type Phillips, Driver Size #2, Head Diameter 0.322 In, Head Height 0.115 In, Plain Finish, Meets/Exceeds ANSI/ASME B18.6.4 and SAE J933 and IFI, Package 100"
Price: 8.27
|
|
| "2VAF1 Disc Magnet, Neodymium, 14.5 lb. Pull" |
"Disc Magnet, Material Sintered Neodymium, Casing Material Nickel Plating, Max. Pull 14.5 lb., Thickness 0.187 In., Diameter 1 In., Stability Temp. 300 Degrees F"
Price: 6.67
|
|
| "8890037 Screw Cover, Hinged, Plastic, 1/4 In, Pk 10" |
"Screw Cover, Hinged Cover, Plastic Material, Color Black, Dia. 1/4 In."
Price: 4.15
|
|
| "Flat Countersunk Head Drywall Screws, 1-1/4 Long, 500-pack, U31300.013.0125" |
"Drywall Screws, Head Type Flat Countersunk, Size #6, Length 1-1/4 In., Point Type Self Tapping, Steel, Finish Black Phosphate, Thread Length Full Thread, Thread Type Coarse, Drive Phillips, Driver Size #2, Head Dia. 8 to 8.30mm, For Interior Use only..."
Price: 6.15
|
|
| "RED HEAD WS-1254 Wedge Anchor, Stl, 1/2x5 1/2 L, PK25" |
"Wedge Anchor, Fully Threaded, Carbon Steel, Thread Size 1/2-13, Overall Length 5 1/2 In, Thread Length 3 In, Min Embedment 2 1/4 In, Max Work Thickness 2 3/4 In, Ultimate Tension in 4000 PSI Concrete 5100 Lb, Ultimate Shear in 4000 PSI Concrete 4760..."
Price: 17.26
|
|
| "1JA61 Rod Coupling Nut, Stl, 5/16-18, Pk 10" |
"Coupling Nut, Nut Style Coupling Nut, System of Measurement Inch, Basic Material Steel, Material Grade Grade 2, Fastener Finish Zinc Chromate, Fastener Thread Direction Right Hand, Dia./Thread Size 5/16 In.-18, Length 1-3/4 In., Fastener Thread Type..."
Price: 10.29
|
|
| "GE LIGHTING 784 Miniature Incand. Bulb,784,6W,T2 1/4,6V" |
"Miniature Incandescent Bulb, Trade Number 784, Bulb Shape T2-1/4, Bulb Base Type 2-Pin (G4), 6 Voltage, Emergency, 6.0 Watts, Bulb Type Miniature, 1000mA Bulb Amps, Average Bulb Life 50 hr., 113 Lumens, Max. Overall Bulb Length 1 In., Light Bulb Dia...."
Price: 6.29
|
|
| "Mandrel, Steel, Marson, 39256" |
"Mandrel, Size 10-24, Steel, For Use With Thread Setting Tools"
Price: 6.55
|
|
| "3HPD3 Torsion Spring, 90 Deg, 0.484OD, PK6" |
"Torsion Spring, Carbon Steel Music Wire, Finish Plain, Deflection Angle 90 Deg., Wind Direction Right Hand, Outside Dia 0.484 In, Wire Dia 0.054 In, Leg Length 2.00 In, Torque at 1/2 Leg Length 3.509 In-lbs, Max. Rod Outside Dia 0.296 In, Spring Length..."
Price: 5.2
|
|
| "1/4-20 Grade 8 Plain Finish Carbon Steel Hex Nuts, 100 pk., U04120.025.0001" |
"Hex Nut, Nut Style Hex Nut, System of Measurement Inch, Carbon Steel, Material Grade Grade 8, Fastener Finish Plain, Fastener Thread Direction Right Hand, Dia./Thread Size 1/4 In.-20, Fastener Thread Type UNC, Width Across Flats 7/16 In., Nut Height..."
Price: 2.8
|
|
| "GE Lighting 40W, A15 Incandescent Light Bulb, 40A15 CD" |
"Incandescent Lamp, Bulb Shape A15, 40 Watts, Bulb Base Type Medium Screw (E26), Lumens 415, Bulb Finish Clear, Bulb Color Temp. 2600K, Incandescent, 120 Voltage, Shatter-Resistant No, Bulb Designation 40A15, Light Appearance 1000 to 2699K, Very Warm..."
Price: 1.16
|
|
| "705RW-034S Bumper, 3/4in., Black, Rubber, PK 10" |
"Bumper, Color Black, Base Dia. 33/64 In., Height 1/4 In., Width 1/4 In., Mounting Style Screw-In, Material Rubber, Tip Material Rubber, Hardware Not Included, Package Quantity 10"
Price: 1.66
|
|
| "4FAC9 Thumb Screw, Spade, 8-32, 1/2 L, PK25" |
"Thumb Screw, Type S, Spade Head, Thread Size 8-32, Length 1/2 In, Steel, Finish Zinc Plated, Head Width 0.34 to 0.36 In, Shoulder Dia 0.29 to 0.31 In, Head Material Steel,Zinc, Rockwell Hardness Brinell Min 137, Package Quantity 25"
Price: 6.28
|
|
| "GE Lighting 250W, ED18 High Pressure Sodium HID Light Bulb, LU250/H/ECO" |
"HID Lamp, Lamp Type High Pressure Sodium, Bulb Shape ED18, Base Type Mogul Screw (E39), 250 Watts, Bulb Color Temp. 2100K, Lumens 28,000, Max. Overall Length 9-3/4 In., Shatter-Resistant No, Bulb Designation LU250/H/ECO, High Pressure Sodium, Color..."
Price: 12.99
|
|
| "UG1877 Safety Pin, 3/8 Dia G0279614" |
"Safety Pin, Coil Tension Snap, Steel, Zinc Plated, 3/8 In Pin Diameter, +0.368/-0.373 In Dia Tolerance, 3 In Usable Length, 0.125 In Length Tolerance, 3 11/16 In Overall Length"
Price: 2.71
|
|
| "BATTALION 4PA61 Template Hinge, Full Mortise, 4 X 4 In" |
"Butt Hinge, Steel, Zinc Finish, With Holes, 4 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 4 In. Door Leaf Height, 4 In. Frame Leaf Height, 4 In. Door Leaf Width, 4 In. Frame Leaf Width, 0.088 In. Door..."
Price: 1.76
|
|
| "4FCW8 Glass Door Magnetic Catch, Surface" |
"Magnetic, Push, Adjustable No, Non-locking, Catch/Latch Material Plastic, Catch/Latch Finish Black Plastic, Catch/Latch Height 1-3/32 In., Catch/Latch Width 1-19/32 In., Catch/Latch Depth 5/8 In., Pull Force 2.5 lb."
Price: 4.57
|
|
| "GE Lighting 6.0W, S6 Incandescent Light Bulb, 6S6DC-120V" |
"Incandescent Lamp, Bulb Shape S6, 6.0 Watts, Bulb Base Type Double Contact Bayonet (BA15d), Lumens 45, Bulb Finish Clear, Bulb Color Temp. 2700K, Incandescent, 120 Voltage, Shatter-Resistant No, Bulb Designation 6S6/DC, Light Appearance 2700 to 2999K,..."
Price: 2.26
|
|
| "S & W NSW-2 Leveling Mount, 1/2-13" |
"Leveling Mount, Leveling Mount Type Swiveling Stud, Thread Size 1/2-13, Base Dia. 1-7/8 In., Load Capacity 3750 lb., Height 3-1/4 In., Hex 3/4 In., Bolt Length 2 In., Steel w/ Non-Skid Pad Base, Steel Construction, Yellow Zinc Finish, Includes Locking Nut"
Price: 14.43
|
|
| "GE Lighting 15W, T6 Incandescent Light Bulb, 15T6 -145v" |
"Incandescent Lamp, Bulb Shape T6, 15.0 Watts, Bulb Base Type Candelabra Screw (E12), Lumens 102, Bulb Finish Clear, Bulb Color Temp. 2800K, Incandescent, 145 Voltage, Shatter-Resistant No, Bulb Designation 15T6, Light Appearance 2700 to 2999K, Soft..."
Price: 4.48
|
|
| "1NWF9 Caster Wheel, 800 lb., 4 D x 2 In." |
"Caster Wheel, Load Rating 800 lb., Wheel Dia. 4 In., Wheel Width 2 In., Caster Wheel/Tread Material Cast Iron, Wheel Color Black, Caster Core Material Cast Iron, Hub Length 2-3/16 In., Fits Axle Dia. 1/2 In., Spanner Bushing Not Included, Core Color..."
Price: 11.61
|
|
| "U12423.019.0001 Locknut, Nylon Insert, 10-24, PK100" |
"Jam Lock Nut, Nut Style Nylon Insert Lock Nut, System of Measurement Inch, Steel, Fastener Finish Zinc Plated, Fastener Thread Direction Right Hand, Fastener Thread Type UNC, Dia./Thread Size #10-24, Material Grade Grade 2, Width Across Flats 3/8 In.,..."
Price: 2.74
|
|
| "U17263.037.0307 U-Bolt, 3/8-16, Steel, Zinc" |
"U-Bolt, Square Bend, Steel, Finish Zinc, Thread Size 3/8-16, Thread Length 3-3/4 In., Inside Length 7 In., Inside Width 3 In., Characteristics ASME B18.2.2- ASTM A563 Grade A / ASME B18.21.1 Type A, Includes (2) Nuts, (2) Washers, Package Quantity 1"
Price: 2.31
|
|
| "NORD-LOCK 1528 Lock Washer, Fits M10, 0.1Th, Pk 10" |
"Lock Washer, EN 1.7182 Carbon Steel, Fits Bolt Sizes M10, Inside Dia. 0.42 In., Outside Dia. 0.83 In., Thickness 0.1 In., Thickness Tolerance +/- .01, Color Silver, Rockwell Hardness Min. 46 HRC, High Vibration, Dynamic Loads, Critical Bolted Joints,..."
Price: 16.56
|
|
| |
|
|
