SpoofCard Caller ID Spoofing Calling Card
| "Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm" |
| "C209 x 1/4 TCT Intumescent Recessor 10 x 24mm - Trend C220X1/4TC, Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification: Diameter: 24mmCutting Depth: 15mmBearing: 16mmShank: 1/4in Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm"
Price: 33.42 |
| "Trend C076 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius" |
| C076-x-1-4-TCT-Bearing-Guided-Ovolo-Round-Over-6-3mm-Radius-Trend-C076X1-4TC-p-Trend-Rounding-Over-self-guiding-TCT-cutter-for-rounding-over-edges-Does-not-require-a-side-fence-Supplied-with-two-bearings-use-the-larger-bearing-for-a-round-over-If-the-cutter-is-lowered-a-top-quirk-can-be-produced-p-p-Bullnose-mouldings-can-also-be-produced-by-taking-a-second-pass-from-the-opposite-side-of-the-workpiece-p-p-Shank-1-4in-p-p-This-Trend-TCT-Bearing-Guided-Ovolo-amp-Round-Ov
Price: 33.29 |
| "Trend 46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/115X1/4TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 1.6 mmD = 15.9 mmC = 7.9 mmBearings = 9.5 and 12.7 mm Trend 46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius"
Price: 42.07 |
| "Trend 46/11 x 1/4 TCT Bearing Guided Ovolo & Round Over 3.2mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/11X1/4TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 3.2 mmD = 19 mmC = 9.5 mmBearings = 9.5 and 12.7 mm Trend 46/11 x 1/4 TCT Bearing Guided Ovolo & Round Over 3.2mm Radius"
Price: 50.20 |
| "Trend 46/12 x 1/4 TCT Bearing Guided Ovolo & Round Over 4.8mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/12X1/4TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 4.8 mmD = 22 mmC = 12.7 mmBearings = 9.5 and 12.7 mm Trend 46/12 x 1/4 TCT Bearing Guided Ovolo & Round Over 4.8mm Radius"
Price: 50.82 |
| "Trend 46/130 x 1/2 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/130X1/2TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 6.3 mmD = 25.4 mmC = 13 mmBearings = 9.5 and 12.7 mm Trend 46/130 x 1/2 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius"
Price: 52.26 |
| "Trend 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/130X1/4TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 6.3 mmD = 25.4 mmC = 13 mmBearings = 9.5 and 12.7 mm Trend 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius"
Price: 52.26 |
| "Trend 46/140 x 1/2 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/140X1/2TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 9.5 mmD = 32 mmC = 16 mmBearings = 9.5 and 12.7 mm Trend 46/140 x 1/2 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius"
Price: 54.19 |
| "Trend 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/140X1/4TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 9.5 mmD = 32 mmC = 16 mmBearings = 9.5 and 12.7 mm Trend 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius"
Price: 54.19 |
| "Trend 46/150 x 1/2 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/150X1/2TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 12.7 mmD = 38 mmC = 19 mmBearings = 9.5 and 12.7 mm Trend 46/150 x 1/2 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius"
Price: 64.38 |
| "Trend 46/150 x 1/4 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/150X1/4TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 12.7 mmD = 38 mmC = 19 mmBearings = 9.5 and 12.7 mm Trend 46/150 x 1/4 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius"
Price: 64.38 |
| "Trend 46/160 x 1/2 TCT Bearing Guided Ovolo & Round Over 16mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/160X1/2TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 16 mmD = 44.5 mmC = 22 mmBearings = 9.5 and 12.7 mm Trend 46/160 x 1/2 TCT Bearing Guided Ovolo & Round Over 16mm Radius"
Price: 73.92 |
| "Trend 46/17 x 1/2 TCT Bearing Guided Ovolo & Round Over 19.1mm Radius" |
| "46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius - Trend 46/17X1/2TC, Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 19 mmD = 51 mmC = 25 mmBearings = 9.5 and 12.7 mm Trend 46/17 x 1/2 TCT Bearing Guided Ovolo & Round Over 19.1mm Radius"
Price: 73.92 |
| "Trend C121B x 1/4 TC Bearing Guided Template Profile Cutter 12.7mm..." |
| "C121B x 1/4 TC Bearing Guided Template Profile Cutter 12.7mm x 9.5mm - Trend C121BX1/4TC, Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work.This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 9.5mmShank: 1/4in Trend C121B x 1/4 TC Bearing Guided Template Profile Cutter 12.7mm x 9.5mm"
Price: 20.64 |
| "Trend C121 x 1/4 TCT Bearing Guided Template Profile Cutter 12.7 x..." |
| "C121B x 1/4 TC Bearing Guided Template Profile Cutter 12.7mm x 9.5mm - Trend C121X1/4TC, Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work.This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 25.4mmShank: 1/4in Trend C121 x 1/4 TCT Bearing Guided Template Profile Cutter 12.7 x 25.4mm"
Price: 20.39 |
| "Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm" |
| "C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm - Trend C152X1/2TC, This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/2in Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm"
Price: 40.66 |
| "Trend C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm" |
| "C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm - Trend C152X1/4TC, This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/4in Trend C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm"
Price: 40.66 |
| "Trend C040 x 1/4 TCT Bearing Guided Rebater 35.0mm" |
| C040-x-1-4-TCT-Bearing-Guided-Rebater-35-0mm-Trend-C040X1-4TC-p-This-cutter-is-self-guiding-and-can-be-used-to-produce-rebates-lapjoints-tongues-and-rebated-corners-p-p-Alternative-bearings-can-be-purchased-to-vary-the-rebate-p-p-Diameter-35-0mm-br-C-12-7mm-br-E-11-1mm-br-B-12-7mm-p-p-T-C-T-br-1-4in-Shank-p-Trend-C040-x-1-4-TCT-Bearing-Guided-Rebater-35-0mm
Price: 29.80 |
| "Trend C044 x 1/4 TCT Chamfer V-Groove 45° 6.0 x 12.7mm" |
| C044-x-1-4-TCT-Chamfer-V-Groove-45-6-0-x-12-7mm-Trend-C044X1-4TC-p-Chamfer-amp-V-Groove-Cutters-br-These-types-of-cutter-are-used-for-edging-grooving-veining-work-and-chamfer-cutting-on-man-made-fibre-boards-natural-timbers-and-plastics-Tools-are-offered-to-produce-various-angles-for-engraving-chamfering-and-V-grooving-Ball-bearing-and-pin-guided-cutters-enable-curved-work-to-be-undertaken-bearings-running-along-the-board-edge-or-a-template-Typical-trade-applications-include-s
Price: 17.04 |
| "Trend C049 x 1/4 TCT Bearing Guided Chamfer 45° 12.7 x 32mm" |
| C049-x-1-4-TCT-Bearing-Guided-Chamfer-45-12-7-x-32mm-Trend-C049X1-4TC-p-Chamfer-amp-V-Groove-Cutters-p-p-These-types-of-cutter-are-used-for-edging-and-chamfer-cutting-on-man-made-fibre-boards-natural-timbers-and-plastics-Tools-are-offered-to-produce-various-angles-for-engraving-chamfering-and-V-grooving-Ball-bearing-and-pin-guided-cutters-enable-curved-work-to-be-undertaken-bearings-running-along-the-board-edge-or-a-template-Typical-trade-applications-include-sign-making-freeh
Price: 27.88 |
| "Trend C130 x 1/4 TCT Bearing Guided Corner Bead 4.8mm Radius" |
| C130-x-1-4-TCT-Bearing-Guided-Corner-Bead-4-8mm-Radius-Trend-C130X1-4TC-p-Attractive-edge-moulds-and-a-full-corner-bead-can-be-produced-by-making-a-second-pass-at-90-deg-with-this-TCT-cutter-Used-on-all-man-made-boards-such-as-medium-density-fibre-board-chipboard-and-also-natural-timbers-and-most-plastics-p-p-T-C-T-br-Shank-1-4in-br-R-4-8-mm-br-D-26-mm-br-d-22-mm-br-C-16-mm-br-B-15-9-mm-p-p-Craft-Range-They-can-be-used-on-all-man-made-boards-such-as-m
Price: 44.11 |
| "Trend C140 x 1/4 TCT Bearing Guided Corner Bead 3.2mm Radius" |
| C140-x-1-4-TCT-Bearing-Guided-Corner-Bead-3-2mm-Radius-Trend-C140X1-4TC-p-Attractive-edge-moulds-and-a-full-corner-bead-can-be-produced-by-making-a-second-pass-at-90-deg-Used-on-all-man-made-boards-such-as-medium-density-fibre-board-chipboard-and-also-natural-timbers-and-most-plastics-p-p-D1-7-8-inch-br-D1-22-3-mm-br-D2-20-mm-br-Cut-length-35-64-inch-br-Cut-length-14-mm-br-B-12-7-mm-br-R1-3-2-mm-br-Shank-Diameter-1-4-inch-p-Trend-C140-x-1-4-TCT-Bearing-Guided
Price: 40.00 |
| "Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm" |
| C145-x-1-4-TCT-Bearing-Guided-Slotting-Cutter-6-3mm-Trend-C145X1-4TC-p-This-two-wing-slotting-cutter-is-ideal-for-grooving-and-rebating-operations-p-p-A-1-2in-diameter-bearing-is-supplied-with-every-cutter-p-p-Depth-of-cut-can-be-changed-by-purchasing-alternative-bearing-sizes-p-p-T-C-T-br-Shank-1-4in-br-C-6-3-mm-Slots-p-p-Depth-with-standard-cutter-3-8in-p-Trend-C145-x-1-4-TCT-Bearing-Guided-Slotting-Cutter-6-3mm
Price: 25.81 |
| "Trend C168 x 1/4TC Guided Trimmer 6.35 x 25.4mm" |
| C168-x-1-4TC-Guided-Trimmer-6-35-x-25-4mm-Trend-C168X1-4TC-p-The-Trend-C168-x-1-4TC-Guided-Trimmer-has-two-flute-carbide-TCT-tips-Used-for-trimming-plastic-or-plywood-overlays-Its-6-3mm-diameter-allows-it-to-follow-more-intricate-curves-25-4mm-cutting-depth-for-replication-of-thin-components-with-templates-p-p-Fitted-with-a-bottom-bearing-guide-for-following-an-edge-to-trim-laminates-and-veneers-for-a-professional-finish-PTFE-coating-to-minimise-heat-and-resin-build-up-for-increase
Price: 16.26 |
| "Trend CASE/1001 Combi 1001 Carry Case" |
| CASE-1001-Combi-1001-Carry-Case-Trend-CASE-1001-p-Hard-wearing-carry-case-for-protecting-and-carrying-the-Trend-COMBI1001-COMBI1002-and-KWJ900-p-Trend-CASE-1001-Combi-1001-Carry-Case
Price: 37.63 |
| "Trend CB38-532 TCT CB Counterbore" |
| CB38-532-TCT-CB-Counterbore-Trend-CB38-532TC-p-The-Trend-CB-counterbore-is-extensively-used-for-recessing-bolt-and-screw-heads-Supplied-with-a-HSS-slow-spiral-drill-bit-Fully-adjustable-a-hex-key-is-supplied-TCT-version-is-used-for-plywood-particle-boards-and-plastics-abrasive-Use-at-drilling-speeds-only-Not-suitable-for-ferrous-and-non-ferrous-metals-When-setting-up-ensure-flutes-of-drill-are-aligned-with-flute-of-counterbore-For-replacement-Twist-Drills-use-slow-spiral-type-e-
Price: 39.22 |
| "Trend CCC/KIT Cutter & Collet Care Kit" |
| CCC-KIT-Cutter-Collet-Care-Kit-Trend-CCC-KIT-p-This-kit-contains-the-essential-accessories-to-maximise-the-life-of-cutters-collets-and-router-br-The-kit-comprises-br-1-Mini-diamond-stone-and-water-bottle-br-4-brass-brushes-for-cleaning-collets-br-1-P-T-F-E-dry-lubricant-spray-br-1-Rust-buster-spray-br-56-page-booklet-p-Trend-CCC-KIT-Cutter-Collet-Care-Kit
Price: 31.60 |
| "Trend 63127 Collet Sleeve 6.35mm to 12.7mm" |
| "63127 Collet Sleeve 6.35mm to 12.7mm - Trend CLT/SLV/63127, Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE63127 Collet Sleeve has the following specifications: Diameter: 12.7mm (1/2in)Internal Bore 6.35mm (1/4in)Bore: 8mm.Overall length: 30mm. Trend 63127 Collet Sleeve 6.35mm to 12.7mm"
Price: 14.32 |
| "Trend 8127 Collet Sleeve 8mm to 12.7mm" |
| "63127 Collet Sleeve 6.35mm to 12.7mm - Trend CLT/SLV/8127, Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE8127 Collet Sleeve has the following specifications:Diameter: 12.7mm (1/2in).Bore: 8mm.Overall length: 30mm. Trend 8127 Collet Sleeve 8mm to 12.7mm"
Price: 14.32 |
| "Trend COMBI/1002 Postform Jig" |
| COMBI-1002-Postform-Jig-Trend-COMBI1002-p-Trend-Postform-jigs-are-designed-to-enable-most-heavy-duty-routers-which-have-plunge-facility-to-cut-exacting-butt-and-scribed-joints-in-worktops-up-to-1000-mm-wide-p-p-The-Combi-1001-features-br-A-single-male-amp-female-template-in-16-mm-solid-laminate-br-Integral-panel-connector-recessing-template-br-Integral-template-slots-for-rounding-of-peninsular-worktop-corners-br-Facility-to-join-boards-400-to-1000-mm-wide-br-Facility
Price: 319.72 |
| "Trend C/CHISEL Corner Chisel" |
| Corner-Chisel-Trend-C-CHISEL-p-The-Trend-Corner-Chisel-is-used-to-square-up-rounded-corners-on-hinge-and-lock-recesses-Fitted-with-a-high-speed-steel-HSS-anvil-Use-with-a-Hammer-The-chisel-can-be-resharpened-p-p-Ideal-for-use-with-hinge-and-lock-jigs-p-Trend-C-CHISEL-Corner-Chisel
Price: 18.91 |
