SpoofCard Caller ID Spoofing Calling Card
| "Trend SNAP/PC10/Set Plug Cutter No.10 Screw Set" |
| SNAP-PC10-Set-Plug-Cutter-No-10-Screw-Set-Trend-SNAP-PC10-SET-p-Plug-cutter-set-which-comprises-Quick-Chuck-drill-countersink-Pozidriv-screwdriver-bit-and-standard-plug-cutter-p-Trend-SNAP-PC10-Set-Plug-Cutter-No-10-Screw-Set
Price: 34.32 |
| "Trend SNAP/PC12/Set Plug Cutter No.12 Screw Set" |
| SNAP-PC12-Set-Plug-Cutter-No-12-Screw-Set-Trend-SNAP-PC12-SET-p-Plug-cutter-set-for-No-12-screw-size-The-set-comprises-Quick-Chuck-Drill-Countersink-Pozi-Screwdriver-bit-and-standard-Plug-cutter-p-Trend-SNAP-PC12-Set-Plug-Cutter-No-12-Screw-Set
Price: 37.96 |
| "Trend SNAP/QC Quick Chuck" |
| SNAP-QC-Quick-Chuck-Trend-SNAP-QC-p-The-Quick-Chuck-will-fit-any-power-drill-that-uses-a-standard-9-5-mm-3-8in-key-or-keyless-chuck-p-p-Attachments-such-as-the-snappy-range-or-direct-drive-1-4in-screwdriver-bits-will-then-snap-in-and-out-without-a-chuck-key-p-p-The-Quick-Chuck-has-six-flats-on-the-shank-to-ensure-non-slippage-in-the-chuck-p-Trend-SNAP-QC-Quick-Chuck
Price: 13.21 |
| "Trend SNAP/TH2/SET Tool Holder Bit Set, 60 Piece" |
| SNAP-TH2-SET-Tool-Holder-Bit-Set-60-Piece-Trend-SNAP-TH2-SET-p-Heavy-duty-fabric-tool-holder-available-with-assorted-Snappy-tools-p-p-Standard-Quick-Chuck-Masonry-bits-5-6-7-amp-8mm-Drill-bit-guide-No-6-No8-br-Drills-1-2-3-4-5-6-amp-7mm-Auger-bits-10-amp-13mm-Flat-bits-16-19-22-25-amp-30-mm-br-Drill-countersinks-2-5-3-25-amp-3-5mm-Deburrer-countersink-Hole-enlarger-br-Square-drive-adapter-1-4-3-8-amp-1-2in-Screwdriver-bit-Pozi-No-1-2-3-br-Magnetic-dr
Price: 115.37 |
| "Trend SP-46/02D Replacement TORX Screw" |
| SP-46-02D-Replacement-TORX-Screw-Trend-SP-46-02D-p-Replacement-TORX-Screws-for-ROTATIP-replacement-cutters-br-We-recommend-you-use-genuine-Trend-TORX-Screws-when-replacing-screws-p-Trend-SP-46-02D-Replacement-TORX-Screw
Price: 2.08 |
| "Trend SET/SS8X1/4TC SS8TC 1/4in TCT Router Bit Starter Set, 12 Piece" |
| SS8TC-1-4in-TCT-Router-Bit-Starter-Set-12-Piece-Trend-SET-SS8X1-4TC-p-Trend-12-Piece-Router-Bit-Starter-Set-contains-a-range-of-the-most-widely-used-cutters-for-decorative-woodworking-Made-from-tungsten-carbide-with-1-4in-shanks-and-supplied-in-a-plastic-carry-case-p-p-Contains-p-p-2-x-Straight-6-3-x-16mm-and-12-7-x-19mm-br-1-x-Dovetail-104-deg-x-1-2in-br-2-x-Guided-Round-Over-R6-35mm-and-R9-5mm-br-1-x-Guided-Chamfer-45-deg-br-1-x-Guided-Rebater-9-5mm-br-1-x
Price: 45.10 |
| "Trend STAIR/A Staircase Jig" |
| STAIR-A-Staircase-Jig-Trend-STAIR-A-p-Closed-Riser-Staircase-Jig-A-is-constructed-from-hard-wearing-solid-laminate-and-includes-a-reversible-fence-for-exact-matching-of-stairs-br-Kit-includes-br-1-x-Adjustable-reversible-clamp-br-1-x-Reversible-clamp-bar-br-1-x-Sub-base-br-1-x-Nose-piece-br-1-x-Line-up-pin-and-bush-br-2-x-Spanners-p-Trend-STAIR-A-Staircase-Jig
Price: 234.59 |
| "Trend T420/35 x 8mm TCT Hinge Sinking 35mm Diameter" |
| T420-35-x-8mm-TCT-Hinge-Sinking-35mm-Diameter-Trend-T420-35X8MMTC-p-Hinge-Sinkers-for-drilling-machines-p-p-TCT-Hinge-sinking-cutter-for-pillar-drills-only-Designed-for-recessing-holes-in-melamine-covered-chipboard-to-receive-circular-hinges-p-p-Diameter-35mm-br-Shank-8mm-p-Trend-T420-35-x-8mm-TCT-Hinge-Sinking-35mm-Diameter
Price: 13.50 |
| "Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter" |
| T421-35-x-1-4-TCT-Hinge-Sinking-Bit-35mm-Diameter-Trend-T421-35X1-4TC-p-The-Trend-T421-35-hinge-cutter-is-typically-used-by-kitchen-unit-manufacturers-and-fitters-for-cutting-35mm-blind-holes-ready-to-accept-recessed-circular-hinges-it-has-a-TCT-blade-for-longer-life-br-This-bit-is-best-suited-for-use-on-thinner-section-laminate-covered-board-br-br-Diameter-35mm-br-Shank-1-4in-p-Trend-T421-35-x-1-4-TCT-Hinge-Sinking-Bit-35mm-Diameter
Price: 29.21 |
| "Trend 36/10 x 1/4 TCT Strip Recessor 13 x 19 x 10 x 6mm" |
| "36/10 x 1/4 TCT Strip Recessor 13 x 19 x 10 x 6mm - Trend 36/10X1/4TC, These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip).Tooling : T.C.T.1/4in Shank. D1 = 13 mmD2 = 19 mmC1 = 10 mmC2 = 6 mm Trend 36/10 x 1/4 TCT Strip Recessor 13 x 19 x 10 x 6mm"
Price: 59.59 |
| "Trend 36/19 x 1/2 TCT Strip Recessor 9.5 x 19 x 13 x 6mm" |
| "36/10 x 1/4 TCT Strip Recessor 13 x 19 x 10 x 6mm - Trend 36/19X1/2TC, These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip).Tooling : T.C.T.1/2in Shank.D1 = 9.5 mmD2 = 19 mmC1 = 13 mmC2 = 6 mm Trend 36/19 x 1/2 TCT Strip Recessor 9.5 x 19 x 13 x 6mm"
Price: 54.19 |
| "Trend SNAP/TH1/SET Tool Holder Bit Set" |
| Tool-Holder-Bit-Set-Trend-SNAP-TH1-SET-p-heavy-duty-fabric-tool-holder-with-a-selection-of-assorted-Snappy-tools-br-With-elastic-pockets-to-hold-Snappy-shanks-br-Supplied-with-a-snappy-pencil-Tool-holders-have-a-belt-strap-and-are-hook-and-Loop-fastening-p-Trend-SNAP-TH1-SET-Tool-Holder-Bit-Set
Price: 56.95 |
| "Trend TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm" |
| TR28-x-1-2-TCT-Bearing-Guided-Trimmer-12-7-x-50mm-Trend-TR28X1-2TC-p-Trend-TR28-Trade-bearing-guided-profiler-with-extra-long-shank-ideal-for-trimming-and-bevelling-timber-lippings-and-plastic-laminate-edges-Features-2mm-micrograin-tungsten-carbide-tips-for-cutting-the-most-abrasive-materials-to-give-extra-long-life-The-cutter-is-PTFE-coated-indicated-by-distinctive-black-colouring-p-p-The-dimensions-etched-on-the-extra-long-40mm-shanks-for-quick-identification-p-p-Dimensions
Price: 46.09 |
| "Trend TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 x ..." |
| TR29-x-1-4-TCT-Shank-Mounted-Bearing-Guided-Profiler-12-7-x-25-4mm-Trend-TR29X1-4TC-p-Trend-TR29-Trade-range-Shank-mounted-guided-profiler-with-extra-long-shank-ideal-for-trimming-and-profiling-timber-man-made-board-Features-2-mm-micrograin-tungsten-carbide-tips-for-cutting-the-most-abrasive-materials-to-give-extra-long-life-The-cutter-is-PTFE-coated-indicated-by-distinctive-black-colouring-p-p-The-guide-profiler-can-be-used-on-hardwood-and-softwood-fibreboard-plywood-and-particl
Price: 27.88 |
| "Trend TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm" |
| TR30-x-1-2-TCT-Shank-Mounted-Bearing-Guided-Profiler-19-1-x-50mm-Trend-TR30X1-2TC-p-Trend-TR30-Trade-Shank-mounted-guided-profiler-with-extra-long-shank-ideal-for-trimming-and-profiling-timber-man-made-board-Features-2mm-micrograin-tungsten-carbide-tips-for-cutting-the-most-abrasive-materials-to-give-extra-long-life-The-cutter-is-PTFE-coated-indicated-by-distinctive-black-colouring-p-p-The-guide-profiler-can-be-used-on-hardwood-and-softwood-fibreboard-plywood-and-particle-board-a
Price: 52.26 |
| "Trend TR35 x 1/2 TCT Biscuit Jointer Set 4.0 x 37.2mm" |
| TR35-x-1-2-TCT-Biscuit-Jointer-Set-4-0-x-37-2mm-Trend-TR35X1-2TC-p-Enables-biscuit-jointing-with-timber-man-made-fibre-and-particle-board-The-correct-choice-of-bearing-will-ensure-the-correct-depth-of-cut-for-biscuit-sizes-No-0-10-amp-20-p-p-Dimensions-BR-Shank-1-2-in-BR-Cutting-Diameter-D-37-2mm-BR-Cutting-Length-C-4-0mm-p-Trend-TR35-x-1-2-TCT-Biscuit-Jointer-Set-4-0-x-37-2mm
Price: 51.48 |
| "Trend TR35 x 1/4 TCT Biscuit Jointer Set 4.0 x 37.2mm" |
| TR35-x-1-4-TCT-Biscuit-Jointer-Set-4-0-x-37-2mm-Trend-TR35X1-4TC-p-Enables-biscuit-jointing-with-timber-man-made-fibre-and-particle-board-The-correct-choice-of-bearing-will-ensure-the-correct-depth-of-cut-for-biscuit-sizes-No-0-10-amp-20-p-p-Dimensions-br-Shank-1-4in-br-Cutting-Diameter-D-37-2mm-br-Cutting-Length-C-4-0mm-p-Trend-TR35-x-1-4-TCT-Biscuit-Jointer-Set-4-0-x-37-2mm
Price: 51.48 |
| "Trend TSQ T-Square" |
| T-Square-Trend-TSQ-p-This-robust-T-Square-in-Tufnol-provides-an-instant-means-of-squaring-off-marking-out-setting-up-jigs-etc-p-p-Can-be-hung-up-when-not-in-use-p-p-Length-680mm-p-Trend-TSQ-T-Square
Price: 37.63 |
| "Trend 3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3 x 16mm" |
| "3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3 x 16mm - Trend 3/20LX1/4TC, Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass.C = 19 mm D = 6.3 mm 1/4 in Trend 3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3 x 16mm"
Price: 31.24 |
| "Trend 3/55L x 3/8 TCT Two Flute Pocket Cutter 9.5 x 19mm" |
| "3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3 x 16mm - Trend 3/55LX3/8TC, Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass.Two flute cutters with extra long shanks for deep grooving, rebating and morticing. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage, take more passes than usual and only cut up to half the diameter of the cutter in one pass. T.C.T.3/8in Shank. Two Flute. Trend 3/55L x 3/8 TCT Two Flute Pocket Cutter 9.5 x 19mm"
Price: 26.86 |
| "Trend S3/21 x 1/4 Solid Two Flute Cutter 6.3 x 28mm" |
| "S3/21 x 1/4 Solid Two Flute Cutter 6.3 x 28mm - Trend S3/21X1/4STC, The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT.Dimensions:Shank: 1/4inCutting Diameter (D): 6.3mmCutting Length (C): 28.0mm Trend S3/21 x 1/4 Solid Two Flute Cutter 6.3 x 28mm"
Price: 47.64 |
| "Trend S3/22 x 1/4 Solid Two Flute Cutter 6.3 x 25mm" |
| "S3/21 x 1/4 Solid Two Flute Cutter 6.3 x 28mm - Trend S3/22X1/4STC, The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT.Dimensions:Shank: 1/4inCutting Diameter (D): 6.3mmCutting Length (C): 25.0mm Trend S3/22 x 1/4 Solid Two Flute Cutter 6.3 x 25mm"
Price: 40.01 |
| "Trend 3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/08X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. 1/2in Shank.C = 25 mmD = 12.7 mm 1/2in Trend 3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm"
Price: 27.10 |
| "Trend 3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/22X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 25 mmD = 6.3 1/4 in Trend 3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm"
Price: 37.30 |
| "Trend 3/2 x 1/2 TCT Two Flute Cutter 6.0 x 16mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/2X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 16 mmD = 6 mm 15/64 in Trend 3/2 x 1/2 TCT Two Flute Cutter 6.0 x 16mm"
Price: 29.80 |
| "Trend 3/4 x 1/2 TCT Two Flute Cutter 8.0 x 19mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/4X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 19 mmD = 8 mm 5/16 in Trend 3/4 x 1/2 TCT Two Flute Cutter 8.0 x 19mm"
Price: 29.16 |
| "Trend 3/50 x 1/2 TCT Two Flute Cutter 9.5 x 25mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/50X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 25 mmD = 9.5 mm 3/8 in Trend 3/50 x 1/2 TCT Two Flute Cutter 9.5 x 25mm"
Price: 26.45 |
| "Trend 3/51 x 1/2 TCT Two Flute Cutter 9.5 x 32mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/51X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 32 mmD = 9.5 mm 3/8 in Trend 3/51 x 1/2 TCT Two Flute Cutter 9.5 x 32mm"
Price: 32.51 |
| "Trend 3/60 x 1/2 TCT Two Flute Cutter 10 x 35mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/60X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 35 mmD = 10 mm 25/64 in Trend 3/60 x 1/2 TCT Two Flute Cutter 10 x 35mm"
Price: 40.66 |
| "Trend 3/6 x 1/2 TCT Two Flute Cutter 10.0 x 19mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/6X1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 19 mmD = 10 mm 25/64 in Trend 3/6 x 1/2 TCT Two Flute Cutter 10.0 x 19mm"
Price: 27.10 |
| "Trend 3/73D x 1/2 TCT Two Flute Cutter 12.0 x 50mm" |
| "3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm - Trend 3/73DX1/2TC, Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 50 mmD = 12mm 15/32in Please note: This cutter is especially suited for drilling. Trend 3/73D x 1/2 TCT Two Flute Cutter 12.0 x 50mm"
Price: 42.07 |
