SpoofCard Caller ID Spoofing Calling Card
| "Trend Arbor For 12Mm Bore Groover Blades 12mm Shank 12mm" |
| "Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.. OL: 84.5 mm Spigot dia.: 12 mm Spigot length incl thread: 45 mm Spigot thread length: 20 mm Diameter: 18.5 mm Shank Diameter: 12 mm Shank Diameter: 12 mm Dia Me..."
Price: 23.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 50mm 2.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 50 mm Kerf: 2.5 mm No. of Teeth: 2 Dia Metric: 50 Sawb..."
Price: 26.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 36mm 2.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 36 mm Kerf: 2.5 mm No. of Teeth: 2 Dia Metric: 36 Sawb..."
Price: 23.95 |
| "Trend Rotatip Trimmer Bearing Guided Router Cutter 19mm 30mm 1/2""" |
| "Blades of cutters can be rotated through 180 degrees to give one new cutting edge. D: 19 mm C: 30 mm B: 19 mm A: 90 degrees OL: 78 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19 Cut Length Metric: 30 Overall Length Metric..."
Price: 70.95 |
| "Trend Bearing Guided Carripile Central Leg Router Cutter 45.8mm 2mm 1/2""" |
| "Recessing cutter is designed to accommodate the Carripile II style weatherstrip. It comes complete with a guide bearing to reduce setting-up time. Carripile II can be used for compression or sliding applications. D: 45.8 mm D2: 35 mm C: 2 mm C..."
Price: 90.95 |
| "Trend Ogee Shoulder Scribe Router Cutter 40.7mm 8mm 1/4""" |
| ...
Price: 82.95 |
| "Trend Chamfer V Groove Router Cutter 19.1mm 9.2mm 8mm" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. D: 3/4 inch D: 19.1 mm C: 9.2 mm C2: 13 mm A: 45 degree..."
Price: 26.95 |
| "Trend Handrail Profiles Router Cutter 35mm 38mm 1/2""" |
| "Side profile for a handrail requiring a good grip. Can be used in conjunction with four different cutters to produce different handrail tops. D: 35 mm C: 38 mm B: 12.7 mm R: 3.2 mm OL: 86 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 D..."
Price: 79.95 |
| "Trend CR/KFP/6 Kitchen Fitters Router Cutter Pack" |
| "Two piece cutter pack with six connecting bolts aimed at kitchen fitters. Pack includes 1/2 inch diameter x 50mm cut length worktop cutters and six connecting bolts. Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certa..."
Price: 44.95 |
| "Trend Cove Bearing Guided Router Cutter 50.8mm 25.4mm 1/2""" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D: 2 inches D: 50.8 mm C: 1 inch C: 25.4 mm B: 12.7 mm B2: 16 mm R: 3/4 inch R: 19.1 mm OL: 75 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Met..."
Price: 72.95 |
| "Trend CR/KFP/3 Kitchen Fitters Router Cutter Pack" |
| "Three piece cutter pack with three connecting bolts and ten biscuits aimed at kitchen fitters. Pack includes one 1/2 inch diameter x 50mm cut length worktop cutter, biscuit jointer cutter, three connecting bolts and ten No.20 biscuits. Gives a clean ..."
Price: 58.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 9.5mm 32mm 1/4""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 39.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 9.5mm 6.35mm 1/4""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 18.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 19.05mm 63mm 1/2""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 66.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 19mm 25mm 1/2""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 54.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 15.9mm 19mm 1/4""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 35.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 12.7mm 32mm 1/2""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 36.95 |
| "Trend Single Flute Pocket Router Cutter 8mm 19mm 1/2""" |
| "A single flute cutters with extra long shanks. All the single flute tools have recessed shanks to allow deeper cutting. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be tak..."
Price: 33.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 9.5mm 25mm 1/2""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 36.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 9.5mm 25mm 1/4""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 36.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 9.5mm 12.7mm 1/4""" |
| "Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimm..."
Price: 23.95 |
| "Trend Router Guide Bush 22mm" |
| "Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 22 mm Inner d..."
Price: 11.95 |
| "Trend TCT Hinge Sinking Router Bit 26mm 3/8""" |
| "These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. D: 26 mm OL: 65 mm Shank Diameter: 3/8 inch Sh..."
Price: 52.95 |
| "Trend HSS Single Flute Straight Cut Router Cutter 4.8mm 19mm 1/4""" |
| "These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC ..."
Price: 9.95 |
| "Trend Professional Two Flute Straight Router Cutter 12.7mm 32mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. TC tips are ground with greater clearance for routing of resinous material. D: 1/2 i..."
Price: 23.95 |
| "Trend Router Dowel Drill 8mm 35mm 1/4""" |
| "Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. D: 8 mm C: 35 mm OL: 70 mm Shank Diameter: 1/4..."
Price: 20.95 |
| "Trend Rota-Tip Two Flute Template Profiler Router Cutter 19.1mm 50mm 1/2""" |
| "Shank mounted bearing profiler for template work. Blade can be rotated 180 degree to give double the life of a conventional tool. Cutter diameter of 19.1mm and bearing diameter of 19.05mm. Has two flutes. DIMENSIONS: D1: 19.1 mm C: 50 mm OL: 10..."
Price: 93.95 |
| "Trend Professional Aluminium and Plastic Cutting Saw Blade 160mm 48T 20mm" |
| "For non-ferrous metals or plastics. These blades have a negative hook angle. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Mi..."
Price: 72.95 |
| "Trend Radius Router Cutter 22.2mm 31.7mm 1/2""" |
| "For coves and part of a rule joint. Two flute. D: 22.2 mm C: 1 1/4 inch C: 31.7 mm R: 7/16 inch R: 11.1 mm OL: 70 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 22.2 Dia Imperial: 7/8 Cut Length Metric: 31.7 Overall Length ..."
Price: 71.95 |
| "Trend CraftPro Bearing Guided Round Over and Ovolo Router Cutter 89mm 50.8MM 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by ..."
Price: 117.95 |
| "Trend Rota-Tip Espagnolette Window Lock Router Cutter 54.9mm 16.3mm 1/2""" |
| "Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. 1/2 inch shank tools are ideal for use in production applications. Routs stepped groove for espagonette lock recess. D1: 54.9 mm C: 16.3/1..."
Price: 111.95 |
