AV Parts Master Products ExcitingAds :: Exciting Ads

Surgent CPA Review Course Options

Sitemap

 
PA45 - Double Width AV Lectern
"A double width lectern with a 17U lockable cupboard on the left, and open cupboard on the right. The left cupboard includes side ventilation. 19"" rack strips and mounts can be fitted (extra) or adjustable internal shelves (extra). The right open cupboard can be fitted with adjustable internal shelves (extra), Angled rear panel to the top can be fitted (extra) to house cutouts for sockets etc. Accurate drawings must be provided for location and size of cutouts. Lockable removable front panel included for ease of access to rear of cupboard space"
Price:


PA50 - Double Width AV Lectern
A wider double width lectern with two lockable 18U cupboards and sliding keyboard shelf. Ventilation is provided in both cupboards which can either accommodate rack inserts (extra) or internal shelves (extra) Doors remove with one press on each hinge. A sloped rear panel to the top is available (extra) to house cutouts for sockets etc. Accurate drawings must be provided for location and size of cutouts. A lockable removable back is included for easy access to equipment and cables.
Price:


PA54 - Double width AV lectern
A high quality, double width AV lectern with two 18U ventilated cupboards. Fully removable, lockable front panels allow easy access to rear of equipment and cables.Includes two sliding keyboard shelves. Desktop includes an angled panel for installation of control panels, input plates and sockets etc.Cable access is provided. Lockable doors are removable with one press on each hinge. Cupboards can be supplied with rack strips and mounts (extra) or adjustable internal shelves (extra).This lectern can be customised to your individual needs, and full drawings will be provided.
Price:


PA55 - Double Width AV Lectern
A high quality, double width AV lectern with two 18U ventilated cupboards. Fully removable, lockable front panels allow easy access to rear of equipment and cables.Includes two sliding keyboard shelves. Desk top includes an angled panel allowing for installation of 15 Sympodium and other similar sized monitors, AMX panels etc.Cable access is provided. Lockable doors are removable with one press on each hinge. Cupboards can be supplied with rack strips and mounts (extra) or adjustable internal shelves (extra).This lectern can be customised to your individual needs, and full drawings will be provided.
Price:


PA57 - Double Width AV Lectern
A high quality, double width AV lectern with two 18U ventilated cupboards. Fully removable, lockable front panels allow easy access to rear of equipment and cables.Includes two sliding keyboard shelves. Desk top includes an angled panel allowing for installation of 17 Sympodium and other similar sized monitors, AMX panels etc, larger than the PA55Cable access is provided. Lockable doors are removable with one press on each hinge. Cupboards can be supplied with rack strips and mounts (extra) or adjustable internal shelves (extra).This lectern can be customised to your individual needs, and full drawings will be provided.
Price:


"Panasonic 48"" TH-48LFE8E Display"
"Stylish Full HD entry professional displayOffering high level of efficiency and easy connectivity for a wide range of applications from digital signage, rental, corporate and education.48"", LCD VA Panel, D-LED, narrow bezel, portrait mode display.Thin Bezel LCD DisplayThis slim design allows effective space utilization in stores, showrooms and conference rooms. With a depth of less than 62 mm, it's slim design allows for discreet installation when wall mounted and along with the narrow bezel this helps viewers concentrate on the displayed image.Simple Signage Operation with no Media PlayerThe LFE8 Series features a USB player. Signage operation is possible by simply inputting the desired content via USB, eliminating the need for a media player. Videos and still images can be displayed, so a wide variety of original signage content can be used.The Right Flat Panel Display To Match Your ApplicationThe LFE8 Series can be mounted in landscape, portrait, or multi-screen configuration. Itis often used portraitfor menu boards and town guide displays. This allowsinformation to be easily seen even at high levelsinside the store, increasing flexibility of installation.With the built- in 10 W + 10 W speakers, this eliminates the need or space for external speakerswhen displaying content with a soundtrack or when holding video conferences. Increased Signal Support for a Wide Variety of ContentCompared to the LFE7 Series, the number of signals supported by the LFE8 Series has been increased by 25 to provide a total of 59. This lets you display the content of various formats. It also saves time for configuration, not only for signage use, but also for reproducing materials in meeting rooms by eliminating the need to convert materials in advance. Display TouchscreenNo Active display area (W x H)1054 x 592 mm Display typeLED Display diagonal121.9 cm (48"") Display resolution1920 x 1080 pixels Display brightness350 cd/m HD typeFull HD Response time8 ms Contrast ratio (typical)4000:1 Ports & interfaces HDMI ports quantity2 DVI-D ports quantity1 VGA (D-Sub) input ports1 Audio (L,R) in1 Audio (L,R) out1 Ethernet LAN (RJ-45) ports1 USB version2.0 Audio Number of built-in speakers2 RMS rated power20 W Design Panel mounting interface200 x 200 mm"
Price:


Panasonic ET-DLE030 Lens
ET-DLE030 Ultra Short Throw Lens Panasonic's new ultra-short-throw lens ET-DLE030 enables large-screen projection from a short distance. Applications greatly expand for digital signage in show windows, stores, train stations, and other locations. By mounting the newly developed ET-DLE030 ultra-short-throw lens onto Panasonic's 1-chip DLP projector*, you can shorten the projection distance by approximately 60 % compared with our ET-DLE085 and ET-DLE080 short throw lenses.This huge savings in space lets you project images in spots where you previously could notsuch as places where the ceiling is too high, or where there is not enough front or rear space for projecting.
Price:


Panasonic ET-DLE085 Lens
This zoom lens is designed for use with Panasonic s applicable projectors. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: The lens cannot be used by itself. It must be mounted onto the specified Panasonic DLP projector. Zoom Lens Ratio 0.78 - 0.98:1 for all 1-Chip DLP Projectors
Price:


Panasonic ET-DLE150 Lens
Zoom lens ET-DLE1501.3 - 1.9:1 (PT-DZ6710/DZ6700)1.4 - 2.0:1 (PT-DW6300S) 1.3 - 2.0:1 (PT-D6000S/D5000S) Zoom lens ET-DLE2502.3 - 3.6:1 (PT-DZ6710/DZ6700)2.4 - 3.8:1 (PT-DW6300S) 2.4 - 3.7:1 (PT-D6000S/D5000S) Zoom lens ET-DLE350 3.6 - 5.4:1 (PT-DZ6710/DZ6700)3.8 - 5.7:1 (PT-DW6300S) 3.7 - 5.6:1 (PT-D6000S/D5000S) Zoom lens ET-DLE4505.4 - 8.6:1 (PT-DZ6710/DZ6700) 5.6 - 9.0:1 (PT-DW6300S)5.5 - 8.9:1 (PT-D6000S/D5000S) Zoom lens ET-DLE080 0.78-0.98 : 1 (PT-DZ6710/DZ6700) 0.82-1.03 : 1 (PT-DW6300S) 0.81-1.01 : 1 (PT-D6000S/D5000S) Fixed focus lens ET-DLE055 0.8:1
Price:


Panasonic ET-DLE250 Lens
Zoom lens ET-DLE1501.3 - 1.9:1 (PT-DZ6710/DZ6700)1.4 - 2.0:1 (PT-DW6300S) 1.3 - 2.0:1 (PT-D6000S/D5000S) Zoom lens ET-DLE2502.3 - 3.6:1 (PT-DZ6710/DZ6700)2.4 - 3.8:1 (PT-DW6300S) 2.4 - 3.7:1 (PT-D6000S/D5000S) Zoom lens ET-DLE350 3.6 - 5.4:1 (PT-DZ6710/DZ6700)3.8 - 5.7:1 (PT-DW6300S) 3.7 - 5.6:1 (PT-D6000S/D5000S) Zoom lens ET-DLE4505.4 - 8.6:1 (PT-DZ6710/DZ6700) 5.6 - 9.0:1 (PT-DW6300S)5.5 - 8.9:1 (PT-D6000S/D5000S) Zoom lens ET-DLE080 0.78-0.98 : 1 (PT-DZ6710/DZ6700) 0.82-1.03 : 1 (PT-DW6300S) 0.81-1.01 : 1 (PT-D6000S/D5000S) Fixed focus lens ET-DLE055 0.8:1
Price:


Panasonic ET-DLE350 Lens
Zoom lens ET-DLE1501.3 - 1.9:1 (PT-DZ6710/DZ6700)1.4 - 2.0:1 (PT-DW6300S) 1.3 - 2.0:1 (PT-D6000S/D5000S) Zoom lens ET-DLE2502.3 - 3.6:1 (PT-DZ6710/DZ6700)2.4 - 3.8:1 (PT-DW6300S) 2.4 - 3.7:1 (PT-D6000S/D5000S) Zoom lens ET-DLE350 3.6 - 5.4:1 (PT-DZ6710/DZ6700)3.8 - 5.7:1 (PT-DW6300S) 3.7 - 5.6:1 (PT-D6000S/D5000S) Zoom lens ET-DLE4505.4 - 8.6:1 (PT-DZ6710/DZ6700) 5.6 - 9.0:1 (PT-DW6300S)5.5 - 8.9:1 (PT-D6000S/D5000S) Zoom lens ET-DLE080 0.78-0.98 : 1 (PT-DZ6710/DZ6700) 0.82-1.03 : 1 (PT-DW6300S) 0.81-1.01 : 1 (PT-D6000S/D5000S) Fixed focus lens ET-DLE055 0.8:1
Price:


Panasonic ET-ELT20 Lens
Panasonic ET-ELT20 Zoom Lens (with a Throw Distance of 2.8 - 4.6:1) for use with the Panasonic EW, EX & EZ Projector series range This product is a Zoom Lens with a throw distance of 2.8 - 4.6:1, designed for use with the Panasonic EW, EX & EZ Projector Series range. The EW, EX & EZ Series range of projectors are perfect for use in environments with an high amount of ambient light, classroom and boardrooms. Whether it be used to project to a large classroom or to deliver an important presentation during a meeting at work. Key Features of the Panasonic ET-ELT20 Zoom Lens Throw Ratio:2.8 - 4.6:1 Lens Type:Zoom Lens Compatible Projectors:PT-EX500E, PT-EX500EL, PT-EX600E, PT-EX600EL, PT-EZ570E, PT-EZ570EL, PT-EW530E, PT-EW530EL, PT-EW630E, PT-EW630EL
Price:


Panasonic ET-ELT31 lens (4.02-7.20:1) for E Series
Zoom Lens 0.73-0.96:1 - For E Series Compatible with the following: PANPTEW550EJ PANPTEW550LEJ PANPTEW650EJ PANPTEX520EJ PANPTEX520LEJ PANPTEX620EJ PANPTEX620LEJ PANPTEZ590EJ PANPTEZ590LEJEAN # :885170268951
Price:


Panasonic ET-ELW30 Zoom 0.96-1.22:1 Lens
ET-ELW30 lens (0.92-1.22:1) Compatible with the following: PANPTEW550EJ PANPTEW550LEJ PANPTEW650EJ PANPTEX520EJ PANPTEX520LEJ PANPTEX620EJ PANPTEX620LEJ PANPTEZ590EJ PANPTEZ590LEJEAN # :885170268975
Price:


Panasonic ET-ELW31 Zoom Lens 0.73-0.96:1 - For E Series
Zoom Lens 0.73-0.96:1 - For E Series Compatible with the following: PANPTEW550EJ PANPTEW550LEJ PANPTEW650EJ PANPTEX520EJ PANPTEX520LEJ PANPTEX620EJ PANPTEX620LEJ PANPTEZ590EJ PANPTEZ590LEJ
Price:


PANASONIC PT-AE100 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LAE100 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-AE200 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LAE100 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-AE300 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LAE100 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-D8500 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LAD8500 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


Panasonic PT-EW730Z Projector
High Brightness and Excellent ContrastDespite its sleek and compact dimensions, the PT-EZ770 Series produces a class-leading 6,500 lm to 7,500 lm of brightness with a contrast ratio of 5,000:1. The iris automatically adjusts to suit ambient lighting conditions.The Daylight View Basic Funtion Ensures Clear Images Even in Brightly Lit RoomsPanasonic s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.Colour Adjustment FunctionA color adjustment function allows you to easily correct for slight variations in the color reproduction range of individual units set up for multiple projection, particularly in side-by-side configuration. Correction is performed on 3 colors (R, G, B) or 7 colors (R, G, B, C, M, Y, W).
Price:


Panasonic PT-EX520EJ Projector - with std lens
"Compact and Stylish Projectors Deliver Up to 6,200 lm BrightnessWith up to 6,200 lm of brightness, the PT-EZ590 Series produces brilliant images even in high levels of artificial light. Text is clear and legible while graphics and video are reproduced with natural vibrancy.Dynamic Contrast of 10,000:1 with IrisHigh dynamic contrast of 10,000:1 is enabled by an iris mechanism, so that whites are brighter and blacks deeper with minimal loss of detail in dark images. The result is crisp and comfortable viewing.High WUXGA Resolution for Lush DetailWith up to WUXGA (1,920 x 1,200) resolution, the PT-EZ590 Series is capable of displaying Full HD video. The extra detail and depth engages viewers for a more compelling presentation.Daylight View Basic Ensures Vivid Images in Bright RoomsPanasonic s original Daylight View Basic uses a built-in sensor to measure ambient light and calibrates image-projection to suit, optimizing brightness and halftone color and sharpening details for easy-to-see pictures in well-lit environments.DICOM Simulation Mode for Medical PresentationsThis imaging mode is similar to the DICOM Part 14 medical imaging standard. It lends a film-like quality to X-ray images, making the PT-EZ590 Series suitable for training presentations related to medicine.Color Adjustment for Multi-screen ProjectionThis function corrects subtle variations in the color reproduction range of individual units set up for multi-screen projection, particularly in side-by-side configuration.Extended Lamp Replacement CyclePT-EZ590 Series projectors feature a lamp replacement cycle of up to 5,000 hours.This helps to lower operating costs, reduce labor, and minimize wastage by extending the operation period between lamp maintenance.Dust-Resistant Cabinet and Extra-Long-Life Eco FilterIf dust gets inside the projector s optical unit, brightness suffers. The PT-EZ590 Series protects against dust intrusion with a one-way airflow design and improved sealing for the lens block, air intake duct, and Eco Filter.This electrostatic Micro Cut Filter captures the tiniest dust particles and requires no maintenance for 15,000 hours.It also can be washed and reused. These dust-resistant projectors are designed to maintain brightness for longer in high-traffic environments while reducing servicing costs.ECO Management Slashes Power ConsumptionA variety of Eco Management functions are accessible via a button on the remote controller.These include brightness optimization for ambient lighting conditions and lamp power reduction when no input signal is detected.Easy-Access Lamp and FilterTo reduce hassle, the filter can be replaced via the side and the lamp from the top of the projector. There s no need to remove the unit from its ceiling mount for periodic maintenance.Quiet Operation in ECO ModeThe quiet design reduces operating noise to just 29 dB, with the sound of the cooling fan hardly noticeable. This helps to keep the audience focused on your presentation.Installation Simplified with DIGITAL LINKPT-EZ590/EZ590L, PT-EW650/EW650L, and PT-EX620/EX620L feature a DIGITAL LINK connection that supports transmission of Full HD video, audio, and control signals through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*. An optional DIGITAL LINK Switcher or Digital Interface Box allows source devices to be connected and signals routed to the projector via one cable, saving installation cost and simplifying the AV system.Powered Lens Shift, Zoom, and Focus via Remote ControlThe wide adjustment range of the powered horizontal/vertical lens-shift function assures convenience and versatility during installation. Zoom and focus are also easily adjusted via remote control.Project onto Curved SurfaceHorizontal, Vertical, and Corner Keystone Correction adjusts the image shape for clear visibility when projecting off-axis or from an unusual angle. Curved Screen Correction allows for the projection of natural, distortion-free images onto curved or cylindrical surfaces.Lens-Centered DesignA symmetrical lens-centered design reduces installation complexity and makes these projectors easier to adapt to a wider range of installation sites.Project Wirelessly with Optional ModuleThe optional ET-WML100 wireless USB module enables projection of a variety of media via Windows PCs, iOS devices, or Android devices loaded with an appropriate app. Whether projecting from desk or ceiling, there s no need for cablesand it s also possible to display content from more than one device at a time in Multi-Live Mode.Presenter Light Ver. 1.0 for Windows PCsStills, video, documents (including PDF and PowerPoint files), and other media displayed on the PC screen can be wirelessly projectedImages from up to four PCs can be projected simultaneouslyVueMagic Pro* for iOS/Android DevicesSelected still images and document formats (including PDF files) are supportedFeatures Live Camera Mode and Annotate ModeImages from up to four devices can be projected simultaneouslyRange of Optional LensesChoose from a selection of optional zoom lenses for your system. The additional lenses make it easier to adapt the projector to the installation site. Lenses attach and detach with one-touch ease.Integrates into Existing AV InfrastructureWith support for PJLink Class 1, Crestron Connected, AMX, and RS-232C over wired LAN, any legacy unit can be swapped out for a PT-EZ590 Series projector without disrupting existing control and management infrastructure. Emulation via RS-232C allows original settings to be preserved. In addition, Multi Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.Mechanical Lens ShutterA mechanical lens shutter prevents light leakage when the projector is on standby or temporarily not in use, such as periods during meetings.Multi Monitoring & Control SoftwareThis software lets you control and monitor multiple projectors/displays at the same time over wired LAN. If a problem occurs, an alert is sent to the monitoring/controlling PC. Terminal panel is LED illuminated and control panel buttons backlit for easy operation in the dark.Early Warning Software ET-SWA100 SeriesEarly Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, and when there are symptoms of trouble. This minimizes downtime to provide more stable operation.Generous ConnectivityConnect any source device to the PT-EZ590 Series via its array of terminals including HDMI and DIGITAL LINK.Other Valuable Features- Power-saving Eco Standby Mode draws just 0.3 W- Direct Power Off enables safe projector shutdown via breaker switch- Anti-theft measures include security bar, password protection, and personalized startup logo- 10 W speaker- Closed Captioning (NTSC, 480i YCBCR)- Schedule Function Specifications Projector Projector native resolutionXGA (1024x768) Native aspect ratio4:3 Supported aspect ratios4:3 Screen size compatibility1016 - 10160 mm (40 - 400"") Contrast ratio (typical)2000:1 Matrix type3-panel (p-Si TFT active) Matrix size1.6 cm (0.63"") Keystone correction, vertical- 25 - 25 Keystone correction, horizontal- 30 - 30 Projection technology3LCD Projector brightness5300 ANSI lumens Lamps Service life of lamp4000 h Bulb power320 W Lamp typeUHM Service life of lamp (economic mode)5000 h Lamps quantity1 lamp(s) Lens system FocusManual Focal length range (f-f)17.1 - 31.7 mm Aperture range (F-F)1.6 - 2.2 Optical zoom1.8x Scanning frequency Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Video Analog signal format systemNTSC,NTSC 4.43,PAL,PAL 60,PAL M,PAL N,SECAM Full HDNo Supported video modes480i,525i,576i,625i,720p,1080i,1080p Audio Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Ports & interfaces HDMI connector typeFull-size VGA (D-Sub) ports quantity2 HDMI ports quantity2 Ethernet LAN (RJ-45) ports1 USB 2.0 ports quantity1 Composite video in1 Audio (L,R) in3 Audio (L,R) out1 S-Video inputs quantity1 RS-232 ports2 DVI portNo Component video (YPbPr/YCbCr) in1 BNC input ports5 Networking Ethernet LANYes Ethernet LAN data rates10,100 Mbit/s Wi-FiNo Storage Card reader integratedNo Sound emission Noise level35 dB Noise level (economic mode)29 dB Technical details Colour of productWhite HDCPYes Plug and PlayYes Air filterYes Performance Number of bulbs1 bulb(s) HDCPYes Plug and PlayYes Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Noise level35 dB Noise level (economic mode)29 dB Air filterYes Multimedia Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Design Product typeDesktop projector Colour of productWhite Display Built-in displayNo Power AC input voltage100 - 240 AC input frequency50/60 Power sourceAC Power consumption (typical)461 W Power consumption (standby)8 W Operational conditions Operating relative humidity (H-H)20 - 80% Operating temperature (T-T)0 - 45 C Weight & dimensions Weight8.4 kg Width498 mm Depth398.3 mm Height145 mm Packaging content Handheld remote controlYes Cables includedAC Batteries includedYes"
Price:


Panasonic PT-EX520LEJ Projector - body only
"Compact and Stylish Projectors Deliver Up to 6,200 lm BrightnessWith up to 6,200 lm of brightness, the PT-EZ590 Series produces brilliant images even in high levels of artificial light. Text is clear and legible while graphics and video are reproduced with natural vibrancy.Dynamic Contrast of 10,000:1 with IrisHigh dynamic contrast of 10,000:1 is enabled by an iris mechanism, so that whites are brighter and blacks deeper with minimal loss of detail in dark images. The result is crisp and comfortable viewing.High WUXGA Resolution for Lush DetailWith up to WUXGA (1,920 x 1,200) resolution, the PT-EZ590 Series is capable of displaying Full HD video. The extra detail and depth engages viewers for a more compelling presentation.Daylight View Basic Ensures Vivid Images in Bright RoomsPanasonic s original Daylight View Basic uses a built-in sensor to measure ambient light and calibrates image-projection to suit, optimizing brightness and halftone color and sharpening details for easy-to-see pictures in well-lit environments.DICOM Simulation Mode for Medical PresentationsThis imaging mode is similar to the DICOM Part 14 medical imaging standard. It lends a film-like quality to X-ray images, making the PT-EZ590 Series suitable for training presentations related to medicine.Color Adjustment for Multi-screen ProjectionThis function corrects subtle variations in the color reproduction range of individual units set up for multi-screen projection, particularly in side-by-side configuration.Extended Lamp Replacement CyclePT-EZ590 Series projectors feature a lamp replacement cycle of up to 5,000 hours.This helps to lower operating costs, reduce labor, and minimize wastage by extending the operation period between lamp maintenance.Dust-Resistant Cabinet and Extra-Long-Life Eco FilterIf dust gets inside the projector s optical unit, brightness suffers. The PT-EZ590 Series protects against dust intrusion with a one-way airflow design and improved sealing for the lens block, air intake duct, and Eco Filter.This electrostatic Micro Cut Filter captures the tiniest dust particles and requires no maintenance for 15,000 hours.It also can be washed and reused. These dust-resistant projectors are designed to maintain brightness for longer in high-traffic environments while reducing servicing costs.ECO Management Slashes Power ConsumptionA variety of Eco Management functions are accessible via a button on the remote controller.These include brightness optimization for ambient lighting conditions and lamp power reduction when no input signal is detected.Easy-Access Lamp and FilterTo reduce hassle, the filter can be replaced via the side and the lamp from the top of the projector. There s no need to remove the unit from its ceiling mount for periodic maintenance.Quiet Operation in ECO ModeThe quiet design reduces operating noise to just 29 dB, with the sound of the cooling fan hardly noticeable. This helps to keep the audience focused on your presentation.Installation Simplified with DIGITAL LINKPT-EZ590/EZ590L, PT-EW650/EW650L, and PT-EX620/EX620L feature a DIGITAL LINK connection that supports transmission of Full HD video, audio, and control signals through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*. An optional DIGITAL LINK Switcher or Digital Interface Box allows source devices to be connected and signals routed to the projector via one cable, saving installation cost and simplifying the AV system.Powered Lens Shift, Zoom, and Focus via Remote ControlThe wide adjustment range of the powered horizontal/vertical lens-shift function assures convenience and versatility during installation. Zoom and focus are also easily adjusted via remote control.Project onto Curved SurfaceHorizontal, Vertical, and Corner Keystone Correction adjusts the image shape for clear visibility when projecting off-axis or from an unusual angle. Curved Screen Correction allows for the projection of natural, distortion-free images onto curved or cylindrical surfaces.Lens-Centered DesignA symmetrical lens-centered design reduces installation complexity and makes these projectors easier to adapt to a wider range of installation sites.Project Wirelessly with Optional ModuleThe optional ET-WML100 wireless USB module enables projection of a variety of media via Windows PCs, iOS devices, or Android devices loaded with an appropriate app. Whether projecting from desk or ceiling, there s no need for cablesand it s also possible to display content from more than one device at a time in Multi-Live Mode.Presenter Light Ver. 1.0 for Windows PCsStills, video, documents (including PDF and PowerPoint files), and other media displayed on the PC screen can be wirelessly projectedImages from up to four PCs can be projected simultaneouslyVueMagic Pro* for iOS/Android DevicesSelected still images and document formats (including PDF files) are supportedFeatures Live Camera Mode and Annotate ModeImages from up to four devices can be projected simultaneouslyRange of Optional LensesChoose from a selection of optional zoom lenses for your system. The additional lenses make it easier to adapt the projector to the installation site. Lenses attach and detach with one-touch ease.Integrates into Existing AV InfrastructureWith support for PJLink Class 1, Crestron Connected, AMX, and RS-232C over wired LAN, any legacy unit can be swapped out for a PT-EZ590 Series projector without disrupting existing control and management infrastructure. Emulation via RS-232C allows original settings to be preserved. In addition, Multi Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.Mechanical Lens ShutterA mechanical lens shutter prevents light leakage when the projector is on standby or temporarily not in use, such as periods during meetings.Multi Monitoring & Control SoftwareThis software lets you control and monitor multiple projectors/displays at the same time over wired LAN. If a problem occurs, an alert is sent to the monitoring/controlling PC. Terminal panel is LED illuminated and control panel buttons backlit for easy operation in the dark.Early Warning Software ET-SWA100 SeriesEarly Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, and when there are symptoms of trouble. This minimizes downtime to provide more stable operation.Generous ConnectivityConnect any source device to the PT-EZ590 Series via its array of terminals including HDMI and DIGITAL LINK.Other Valuable Features- Power-saving Eco Standby Mode draws just 0.3 W- Direct Power Off enables safe projector shutdown via breaker switch- Anti-theft measures include security bar, password protection, and personalized startup logo- 10 W speaker- Closed Captioning (NTSC, 480i YCBCR)- Schedule Function Specifications Projector Projector native resolutionXGA (1024x768) Native aspect ratio4:3 Supported aspect ratios4:3 Screen size compatibility1016 - 10160 mm (40 - 400"") Contrast ratio (typical)2000:1 Matrix type3-panel (p-Si TFT active) Matrix size1.6 cm (0.63"") Keystone correction, vertical- 25 - 25 Keystone correction, horizontal- 30 - 30 Projection technology3LCD Projector brightness5300 ANSI lumens Lamps Service life of lamp4000 h Bulb power320 W Lamp typeUHM Service life of lamp (economic mode)5000 h Lamps quantity1 lamp(s) Lens system FocusManual Focal length range (f-f)17.1 - 31.7 mm Aperture range (F-F)1.6 - 2.2 Optical zoom1.8x Scanning frequency Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Video Analog signal format systemNTSC,NTSC 4.43,PAL,PAL 60,PAL M,PAL N,SECAM Full HDNo Supported video modes480i,525i,576i,625i,720p,1080i,1080p Audio Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Ports & interfaces HDMI connector typeFull-size VGA (D-Sub) ports quantity2 HDMI ports quantity2 Ethernet LAN (RJ-45) ports1 USB 2.0 ports quantity1 Composite video in1 Audio (L,R) in3 Audio (L,R) out1 S-Video inputs quantity1 RS-232 ports2 DVI portNo Component video (YPbPr/YCbCr) in1 BNC input ports5 Networking Ethernet LANYes Ethernet LAN data rates10,100 Mbit/s Wi-FiNo Storage Card reader integratedNo Sound emission Noise level35 dB Noise level (economic mode)29 dB Technical details Colour of productWhite HDCPYes Plug and PlayYes Air filterYes Performance Number of bulbs1 bulb(s) HDCPYes Plug and PlayYes Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Noise level35 dB Noise level (economic mode)29 dB Air filterYes Multimedia Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Design Product typeDesktop projector Colour of productWhite Display Built-in displayNo Power AC input voltage100 - 240 AC input frequency50/60 Power sourceAC Power consumption (typical)461 W Power consumption (standby)8 W Operational conditions Operating relative humidity (H-H)20 - 80% Operating temperature (T-T)0 - 45 C Weight & dimensions Weight8.4 kg Width498 mm Depth398.3 mm Height145 mm Packaging content Handheld remote controlYes Cables includedAC Batteries includedYes"
Price:


Panasonic PT-EX620EJ Projector - with std lens
"Compact and Stylish Projectors Deliver Up to 6,200 lm BrightnessWith up to 6,200 lm of brightness, the PT-EZ590 Series produces brilliant images even in high levels of artificial light. Text is clear and legible while graphics and video are reproduced with natural vibrancy.Dynamic Contrast of 10,000:1 with IrisHigh dynamic contrast of 10,000:1 is enabled by an iris mechanism, so that whites are brighter and blacks deeper with minimal loss of detail in dark images. The result is crisp and comfortable viewing.High WUXGA Resolution for Lush DetailWith up to WUXGA (1,920 x 1,200) resolution, the PT-EZ590 Series is capable of displaying Full HD video. The extra detail and depth engages viewers for a more compelling presentation.Daylight View Basic Ensures Vivid Images in Bright RoomsPanasonic s original Daylight View Basic uses a built-in sensor to measure ambient light and calibrates image-projection to suit, optimizing brightness and halftone color and sharpening details for easy-to-see pictures in well-lit environments.DICOM Simulation Mode for Medical PresentationsThis imaging mode is similar to the DICOM Part 14 medical imaging standard. It lends a film-like quality to X-ray images, making the PT-EZ590 Series suitable for training presentations related to medicine.Color Adjustment for Multi-screen ProjectionThis function corrects subtle variations in the color reproduction range of individual units set up for multi-screen projection, particularly in side-by-side configuration.Extended Lamp Replacement CyclePT-EZ590 Series projectors feature a lamp replacement cycle of up to 5,000 hours.This helps to lower operating costs, reduce labor, and minimize wastage by extending the operation period between lamp maintenance.Dust-Resistant Cabinet and Extra-Long-Life Eco FilterIf dust gets inside the projector s optical unit, brightness suffers. The PT-EZ590 Series protects against dust intrusion with a one-way airflow design and improved sealing for the lens block, air intake duct, and Eco Filter.This electrostatic Micro Cut Filter captures the tiniest dust particles and requires no maintenance for 15,000 hours.It also can be washed and reused. These dust-resistant projectors are designed to maintain brightness for longer in high-traffic environments while reducing servicing costs.ECO Management Slashes Power ConsumptionA variety of Eco Management functions are accessible via a button on the remote controller.These include brightness optimization for ambient lighting conditions and lamp power reduction when no input signal is detected.Easy-Access Lamp and FilterTo reduce hassle, the filter can be replaced via the side and the lamp from the top of the projector. There s no need to remove the unit from its ceiling mount for periodic maintenance.Quiet Operation in ECO ModeThe quiet design reduces operating noise to just 29 dB, with the sound of the cooling fan hardly noticeable. This helps to keep the audience focused on your presentation.Installation Simplified with DIGITAL LINKPT-EZ590/EZ590L, PT-EW650/EW650L, and PT-EX620/EX620L feature a DIGITAL LINK connection that supports transmission of Full HD video, audio, and control signals through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*. An optional DIGITAL LINK Switcher or Digital Interface Box allows source devices to be connected and signals routed to the projector via one cable, saving installation cost and simplifying the AV system.Powered Lens Shift, Zoom, and Focus via Remote ControlThe wide adjustment range of the powered horizontal/vertical lens-shift function assures convenience and versatility during installation. Zoom and focus are also easily adjusted via remote control.Project onto Curved SurfaceHorizontal, Vertical, and Corner Keystone Correction adjusts the image shape for clear visibility when projecting off-axis or from an unusual angle. Curved Screen Correction allows for the projection of natural, distortion-free images onto curved or cylindrical surfaces.Lens-Centered DesignA symmetrical lens-centered design reduces installation complexity and makes these projectors easier to adapt to a wider range of installation sites.Project Wirelessly with Optional ModuleThe optional ET-WML100 wireless USB module enables projection of a variety of media via Windows PCs, iOS devices, or Android devices loaded with an appropriate app. Whether projecting from desk or ceiling, there s no need for cablesand it s also possible to display content from more than one device at a time in Multi-Live Mode.Presenter Light Ver. 1.0 for Windows PCsStills, video, documents (including PDF and PowerPoint files), and other media displayed on the PC screen can be wirelessly projectedImages from up to four PCs can be projected simultaneouslyVueMagic Pro* for iOS/Android DevicesSelected still images and document formats (including PDF files) are supportedFeatures Live Camera Mode and Annotate ModeImages from up to four devices can be projected simultaneouslyRange of Optional LensesChoose from a selection of optional zoom lenses for your system. The additional lenses make it easier to adapt the projector to the installation site. Lenses attach and detach with one-touch ease.Integrates into Existing AV InfrastructureWith support for PJLink Class 1, Crestron Connected, AMX, and RS-232C over wired LAN, any legacy unit can be swapped out for a PT-EZ590 Series projector without disrupting existing control and management infrastructure. Emulation via RS-232C allows original settings to be preserved. In addition, Multi Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.Mechanical Lens ShutterA mechanical lens shutter prevents light leakage when the projector is on standby or temporarily not in use, such as periods during meetings.Multi Monitoring & Control SoftwareThis software lets you control and monitor multiple projectors/displays at the same time over wired LAN. If a problem occurs, an alert is sent to the monitoring/controlling PC. Terminal panel is LED illuminated and control panel buttons backlit for easy operation in the dark.Early Warning Software ET-SWA100 SeriesEarly Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, and when there are symptoms of trouble. This minimizes downtime to provide more stable operation.Generous ConnectivityConnect any source device to the PT-EZ590 Series via its array of terminals including HDMI and DIGITAL LINK.Other Valuable Features- Power-saving Eco Standby Mode draws just 0.3 W- Direct Power Off enables safe projector shutdown via breaker switch- Anti-theft measures include security bar, password protection, and personalized startup logo- 10 W speaker- Closed Captioning (NTSC, 480i YCBCR)- Schedule Function Specifications Projector Projector native resolutionXGA (1024x768) Native aspect ratio4:3 Supported aspect ratios4:3 Screen size compatibility1016 - 10160 mm (40 - 400"") Contrast ratio (typical)10000:1 Matrix type3-panel (p-Si TFT active) Matrix size1.6 cm (0.63"") Keystone correction, vertical- 25 - 25 Keystone correction, horizontal- 30 - 30 Projection technology3LCD Projector brightness6200 ANSI lumens Lamps Service life of lamp4000 h Bulb power320 W Lamp typeUHM Service life of lamp (economic mode)5000 h Lamps quantity1 lamp(s) Lens system FocusManual Focal length range (f-f)17.1 - 31.7 mm Aperture range (F-F)1.6 - 2.2 Optical zoom1.8x Scanning frequency Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Video Analog signal format systemNTSC,NTSC 4.43,PAL,PAL 60,PAL M,PAL N,SECAM Full HDNo Supported video modes480i,525i,576i,625i,720p,1080i,1080p Audio Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Ports & interfaces HDMI connector typeFull-size VGA (D-Sub) ports quantity2 HDMI ports quantity2 Ethernet LAN (RJ-45) ports1 USB 2.0 ports quantity1 Composite video in1 Audio (L,R) in3 Audio (L,R) out1 S-Video inputs quantity1 RS-232 ports2 DVI portNo Component video (YPbPr/YCbCr) in1 BNC input ports5 Networking Ethernet LANYes Ethernet LAN data rates10,100 Mbit/s Wi-FiNo Storage Card reader integratedNo Sound emission Noise level35 dB Noise level (economic mode)29 dB Technical details Colour of productWhite HDCPYes Plug and PlayYes Air filterYes Performance Number of bulbs1 bulb(s) HDCPYes Plug and PlayYes Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Noise level35 dB Noise level (economic mode)29 dB Air filterYes Multimedia Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Design Product typeDesktop projector Colour of productWhite Display Built-in displayNo Power AC input voltage100 - 240 AC input frequency50/60 Power sourceAC Power consumption (typical)461 W Power consumption (standby)12 W Operational conditions Operating relative humidity (H-H)20 - 80% Operating temperature (T-T)0 - 45 C Weight & dimensions Weight8.4 kg Width498 mm Depth398.3 mm Height145 mm Packaging content Handheld remote controlYes Cables includedAC Batteries includedYes"
Price:


Panasonic PT-EX620LEJ Projector - Body Only
"Compact and Stylish Projectors Deliver Up to 6,200 lm BrightnessWith up to 6,200 lm of brightness, the PT-EZ590 Series produces brilliant images even in high levels of artificial light. Text is clear and legible while graphics and video are reproduced with natural vibrancy.Dynamic Contrast of 10,000:1 with IrisHigh dynamic contrast of 10,000:1 is enabled by an iris mechanism, so that whites are brighter and blacks deeper with minimal loss of detail in dark images. The result is crisp and comfortable viewing.High WUXGA Resolution for Lush DetailWith up to WUXGA (1,920 x 1,200) resolution, the PT-EZ590 Series is capable of displaying Full HD video. The extra detail and depth engages viewers for a more compelling presentation.Daylight View Basic Ensures Vivid Images in Bright RoomsPanasonic s original Daylight View Basic uses a built-in sensor to measure ambient light and calibrates image-projection to suit, optimizing brightness and halftone color and sharpening details for easy-to-see pictures in well-lit environments.DICOM Simulation Mode for Medical PresentationsThis imaging mode is similar to the DICOM Part 14 medical imaging standard. It lends a film-like quality to X-ray images, making the PT-EZ590 Series suitable for training presentations related to medicine.Color Adjustment for Multi-screen ProjectionThis function corrects subtle variations in the color reproduction range of individual units set up for multi-screen projection, particularly in side-by-side configuration.Extended Lamp Replacement CyclePT-EZ590 Series projectors feature a lamp replacement cycle of up to 5,000 hours.This helps to lower operating costs, reduce labor, and minimize wastage by extending the operation period between lamp maintenance.Dust-Resistant Cabinet and Extra-Long-Life Eco FilterIf dust gets inside the projector s optical unit, brightness suffers. The PT-EZ590 Series protects against dust intrusion with a one-way airflow design and improved sealing for the lens block, air intake duct, and Eco Filter.This electrostatic Micro Cut Filter captures the tiniest dust particles and requires no maintenance for 15,000 hours.It also can be washed and reused. These dust-resistant projectors are designed to maintain brightness for longer in high-traffic environments while reducing servicing costs.ECO Management Slashes Power ConsumptionA variety of Eco Management functions are accessible via a button on the remote controller.These include brightness optimization for ambient lighting conditions and lamp power reduction when no input signal is detected.Easy-Access Lamp and FilterTo reduce hassle, the filter can be replaced via the side and the lamp from the top of the projector. There s no need to remove the unit from its ceiling mount for periodic maintenance.Quiet Operation in ECO ModeThe quiet design reduces operating noise to just 29 dB, with the sound of the cooling fan hardly noticeable. This helps to keep the audience focused on your presentation.Installation Simplified with DIGITAL LINKPT-EZ590/EZ590L, PT-EW650/EW650L, and PT-EX620/EX620L feature a DIGITAL LINK connection that supports transmission of Full HD video, audio, and control signals through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*. An optional DIGITAL LINK Switcher or Digital Interface Box allows source devices to be connected and signals routed to the projector via one cable, saving installation cost and simplifying the AV system.Powered Lens Shift, Zoom, and Focus via Remote ControlThe wide adjustment range of the powered horizontal/vertical lens-shift function assures convenience and versatility during installation. Zoom and focus are also easily adjusted via remote control.Project onto Curved SurfaceHorizontal, Vertical, and Corner Keystone Correction adjusts the image shape for clear visibility when projecting off-axis or from an unusual angle. Curved Screen Correction allows for the projection of natural, distortion-free images onto curved or cylindrical surfaces.Lens-Centered DesignA symmetrical lens-centered design reduces installation complexity and makes these projectors easier to adapt to a wider range of installation sites.Project Wirelessly with Optional ModuleThe optional ET-WML100 wireless USB module enables projection of a variety of media via Windows PCs, iOS devices, or Android devices loaded with an appropriate app. Whether projecting from desk or ceiling, there s no need for cablesand it s also possible to display content from more than one device at a time in Multi-Live Mode.Presenter Light Ver. 1.0 for Windows PCsStills, video, documents (including PDF and PowerPoint files), and other media displayed on the PC screen can be wirelessly projectedImages from up to four PCs can be projected simultaneouslyVueMagic Pro* for iOS/Android DevicesSelected still images and document formats (including PDF files) are supportedFeatures Live Camera Mode and Annotate ModeImages from up to four devices can be projected simultaneouslyRange of Optional LensesChoose from a selection of optional zoom lenses for your system. The additional lenses make it easier to adapt the projector to the installation site. Lenses attach and detach with one-touch ease.Integrates into Existing AV InfrastructureWith support for PJLink Class 1, Crestron Connected, AMX, and RS-232C over wired LAN, any legacy unit can be swapped out for a PT-EZ590 Series projector without disrupting existing control and management infrastructure. Emulation via RS-232C allows original settings to be preserved. In addition, Multi Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.Mechanical Lens ShutterA mechanical lens shutter prevents light leakage when the projector is on standby or temporarily not in use, such as periods during meetings.Multi Monitoring & Control SoftwareThis software lets you control and monitor multiple projectors/displays at the same time over wired LAN. If a problem occurs, an alert is sent to the monitoring/controlling PC. Terminal panel is LED illuminated and control panel buttons backlit for easy operation in the dark.Early Warning Software ET-SWA100 SeriesEarly Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, and when there are symptoms of trouble. This minimizes downtime to provide more stable operation.Generous ConnectivityConnect any source device to the PT-EZ590 Series via its array of terminals including HDMI and DIGITAL LINK.Other Valuable Features- Power-saving Eco Standby Mode draws just 0.3 W- Direct Power Off enables safe projector shutdown via breaker switch- Anti-theft measures include security bar, password protection, and personalized startup logo- 10 W speaker- Closed Captioning (NTSC, 480i YCBCR)- Schedule Function Specifications Projector Projector native resolutionXGA (1024x768) Native aspect ratio4:3 Supported aspect ratios4:3 Screen size compatibility1016 - 10160 mm (40 - 400"") Contrast ratio (typical)10000:1 Matrix type3-panel (p-Si TFT active) Matrix size1.6 cm (0.63"") Keystone correction, vertical- 25 - 25 Keystone correction, horizontal- 30 - 30 Projection technology3LCD Projector brightness6200 ANSI lumens Lamps Service life of lamp4000 h Bulb power320 W Lamp typeUHM Service life of lamp (economic mode)5000 h Lamps quantity1 lamp(s) Lens system FocusManual Focal length range (f-f)17.1 - 31.7 mm Aperture range (F-F)1.6 - 2.2 Optical zoom1.8x Scanning frequency Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Video Analog signal format systemNTSC,NTSC 4.43,PAL,PAL 60,PAL M,PAL N,SECAM Full HDNo Supported video modes480i,525i,576i,625i,720p,1080i,1080p Audio Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Ports & interfaces HDMI connector typeFull-size VGA (D-Sub) ports quantity2 HDMI ports quantity2 Ethernet LAN (RJ-45) ports1 USB 2.0 ports quantity1 Composite video in1 Audio (L,R) in3 Audio (L,R) out1 S-Video inputs quantity1 RS-232 ports2 DVI portNo Component video (YPbPr/YCbCr) in1 BNC input ports5 Networking Ethernet LANYes Ethernet LAN data rates10,100 Mbit/s Wi-FiNo Storage Card reader integratedNo Sound emission Noise level35 dB Noise level (economic mode)29 dB Technical details Colour of productWhite HDCPYes Plug and PlayYes Air filterYes Performance Number of bulbs1 bulb(s) HDCPYes Plug and PlayYes Vertical scan range24 - 100 Hz Horizontal scan range15 - 90 kHz Noise level35 dB Noise level (economic mode)29 dB Air filterYes Multimedia Built-in speaker(s)Yes Number of built-in speakers1 RMS rated power10 W Design Product typeDesktop projector Colour of productWhite Display Built-in displayNo Power AC input voltage100 - 240 AC input frequency50/60 Power sourceAC Power consumption (typical)461 W Power consumption (standby)12 W Operational conditions Operating relative humidity (H-H)20 - 80% Operating temperature (T-T)0 - 45 C Weight & dimensions Weight8.4 kg Width498 mm Depth398.3 mm Height145 mm Packaging content Handheld remote controlYes Cables includedAC Batteries includedYes"
Price:


PANASONIC PT-L300U lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LAE100 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-L395 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LA095 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-L501X lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LA702 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-L502 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LA702 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-L511X lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LA702 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price:


PANASONIC PT-L512 lamp (Original Bulb in Original Housing)
Original Manufacturer part number is ET-LA702 OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty. As Proud members of The Genuine Lamp Alliance' to enable our customers to make a fair comparison when purchasing a replacement lamp we would like to offer the following information: Search engines will throw up a host of choices, requiring decisions to be made. These decisions can spark a range of consequences spanning from simple dissatisfaction with the quality of the product, to health and safety risks - and even questionable ethics and legality where intellectual property is abused or counterfeit lamps are passed off as original replacements. In today s market for replacement lamps, the cheapest option doesn t always represent the best value; products are not always what they seem and even the presence of a manufacturer s brand or technology provider s logo is not always a guarantee that a replacement lamp is genuine. Online retailers who offer Genuine Lamps This is an alternative to sourcing a replacement lamp from the original device manufacturer (OEM), the leading lamp technology rights owners authorised a small number third party suppliers to manufacture compatible replacement lamp modules using the same technology as the original, branded product installed by the projector and rear-projection TV manufacturers. - These are equivalent to our Diamond Lamps Is the replacement lamp on offer just too cheap? There is a hierarchy of lamp pricing. Original lamps supplied by the manufacture of the projector or rear-projection TV are usually the most expensive, but offer the replacement lamp buyer reassurance on issues such as continuing warranty protection. Next in the hierarchy come genuine lamps, manufactured with the consent and support of the lamp technology rights owners and using exactly the same lamp components as the original lamp fitted to the projector or rear-projection TV. Genuine replacement lamps are made by a small number of authorised manufacturers. For example, Philips has authorised Diamond Lamps to make replacement lamp modules using genuine UHP technology. Finally, the cheapest lamps available will almost certainly be copy lamps. The manufacturers save costs in a variety of ways, none of which are generally favourable to lamp module buyers Can the reseller or retailer be trusted? The emergence of copy lamps has triggered a host of internet-based dealers to enter the market for replacement lamp modules. Some of these have excellent credentials, often linked to an established audio-visual or consumer electronics business, while others are simply opportunistic. When buying on the internet it can be difficult to assess the quality or ethical policy of the supplier. Helpful signs of a quality supplier include relationships with projector manufacturers, such as authorised dealer status, or a specialist replacement lamp distributor.
Price: