| "Clarke Clarke CAF304 300mm (12"") Heavy Duty Axial Plate Fan" |
| "This axial plate fan is engineered for continuous use. Suitable for industrial/commercial ventilation as well as agricultural applications"
Price: 238.80 |
| "Clarke Clarke Ranger 7/240 2hp 24 Litre Air Compressor" |
| "Great value compressor suitable for DIY and trade applications. Use for spraying (automotive bodywork, fences, sheds etc), nailing/stapling, cleaning etc. Ideal for powering spray guns, air tools and a wide range of airline accessories for inflating, blowing, cleaning etc. With twin air outlets for increased versatility."
Price: 119.98 |
| "Clarke Clarke CXR200 20HP Industrial Screw Compressor" |
| "Built to combine total reliability with high performance and minimum energy consumption, this superb range of screw compressors offers state of the art technology at exceptionally keen pricing. Features: Easy Installation • Will fit easily through a 900mm doorway. • Compact design saves on space required. • Construction allows positioning with a pallet truck • Simply connect to air system and electrical supply (all units are fully tested before dispatch) • No need for floor fixing due to vibration free operation Comprehensive Digital Control Panel Constantly monitors: • Air Pressure • Oil temperature • Motor temperature • Condition of all filters • Hours run • Indicates when maintenance is due • Indicates excessive temperature prior to shut-down • Controls on demand mode of operation, continuous or automatic. Easy Maintenance • Removable side panels for full access • Simple screw-on oil cartridge and oil separator filters Low Noise Level: Operates at 69 Db (A) removing the need for a separate enclosure, which maximises flexibility for choice of location. Superb Build Quality: Construction and performance satisfy relevant European standards Technical Features: 1. Large oil separator tank ensures minimal oil carry over (typically as low as 3mg/m3) 2. Minimum pressure valve ensures correct oil pressure & lubrication 3. Thermostatic valve controls oil temperature and prevents condensation developing inside the oil separator tank 4. Suction valve adjusts compressor output 5. Over sized suction filter ensures maximum air intake filtration, thereby reducing maintenance and extending oil and compressor life"
Price: 3838.80 |
| "Clarke Clarke 6"" Heavy Duty Dual Action Sander - CAT24B" |
| "For a virtually scratch free finish on painted and varnished surfaces.Full range of compatible red aluminium oxide self adhesive sanding discs."
Price: 38.39 |
| "Clarke Clarke 21° Round Head Framing Nailer - CFN21" |
| "Clarkes powerful, heavy duty pneumatic nail gun is perfect for a multitude of construction and timber fabricating tasks - roof joist assembly, fastening noggins, and nailing engineered lumber for example. A large magazine accommodates up to sixty 21° round head nails, and the tool itself is fitted with a safety yoke and an anti fatigue soft rubber grip handle."
Price: 107.98 |
| "Clarke CTR3300/2 Transformer" |
| "Specifically designed to reduce voltage to a prescribed safe working level, this general duty transformer is especially useful for building and construction sites. Enclosed in tough moulded glass fibre case, the CTR 3300/2 will supply power for lighting, power tools and similar equipment."
Price: 81.59 |
| "Clarke Clarke GP32/2 Generator Plug (230V)" |
| "230V 32A Generator Plug"
Price: 5.99 |
| "Clarke Clarke IG1000 1kW Inverter Generator" |
| "A lightweight, low noise generator with Pure Sine Wave TechnologyIdeal for providing a ready source of electrical power when, for example, out camping, caravanning, or enjoying a boat trip. The 'Pure Sine Wave Technology' controlled electrical output ensures the delivery of clean & stable power - vital when running sensitive electrical and electronic equipment - computers and laptops, for example. To add to its overall ergonomics and appearance, it is housed in a stylish case (which also has the additional benefit of reducing noise levels to an absolute minimum).Requires SAE30 oil, available from Machine Mart and most petrol stations and supermarkets. ukcampsite.co.uk were certainly impressed with the IG1000's capabilities: ""It ran smoothly and quietly""...""Charge your batteries and run mains equipment up to 1kW""...""We are very impressed with this generator"" Click here to read their full expert review of the IG1000."
Price: 275.98 |
| "Clarke Clarke 145ND Dual Voltage ARC Welder" |
| "A general purpose 140 Amp arc welder which is an ideal choice for numerous users. Operating equally effectively from both 230V & 110V mains input power means it can not only be used in garages and workshops but also on construction sites which are limited to a 110V supply. The sturdy build quality & long term reliability ensure good service for contractors and mobile welders."
Price: 119.98 |
| "Clarke Clarke 3/4"" Square Drive Air Impact Wrench - CAT48" |
| "This powerful heavy-duty wrench is designed for daily use in garages and workshops.Download Product Manual"
Price: 130.80 |
| "Clarke Clarke WSC1 Heavy Duty Welding Screen & Frame" |
| "This heavy duty welding screen provides protection to other people from blue light & ultra violet (UV) rays from welding arc. Featuring a sturdy steel frame with 4 braked castors for good portability & stability."
Price: 107.98 |
| "Clarke Industrial Mig Tip 0.8mm Pk5" |
| "For use with 0.8mm steel MIG welding wire and Clarke Industrial MIG welders"
Price: 4.79 |
| "Clarke Clarke 145TN ARC Welder" |
| "With 140 Amps maximum power, and heavier duty components, this entry model to our professional arc welding range is great for a wide range of metal fabrication, repair and maintenance work."
Price: 107.98 |
| "Clarke 3hp Single Phase 2-Pole Motor" |
| "Suited to a variety of applications, this totally enclosed fan cooled 110V motor is continuously rated for reliable long term service. It features standard foot mounting, a 24mm key way drive shaft, permanent capacitor and precision balanced rotor for vibration free operation.Please click here to see our handy frame sizing guide. "
Price: 191.98 |
| "Clarke Clarke CAF030 Air Filter 0.1micron" |
| "A high efficiency air filter with maximum 16bar operating pressure, ideal for use with Clarke's range of vertical air compressors, refrigerant dryers and industrial screw compressors. Easy to install and featuring removable cartridges, this 0.1micron filter is suitable for a wide range of water based painting applications."
Price: 178.80 |
| "Clarke Clarke RWLT36 Rechargeable LED Telescopic Worklight & Torch" |
| "Ideal for DIY jobs, leisure use or as an emergency light source. Works as a standard torch, but can also be extended/retracted and used as a worklight."
Price: 21.59 |
| "Clarke Clarke MIG105EN Turbo No Gas/Gas MIG Welder" |
| "The MIG 105EN is a dual purpose machine that offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of any breeze blowing away the shrouding effect of the gas."
Price: 233.99 |
| "Clarke Clarke 4hp Single Phase 2-Pole Motor" |
| "Suited to a variety of applications, this totally enclosed fan cooled 230V motor provides reliable long term service.Please click here to see our handy frame sizing guide. "
Price: 149.99 |
| "Clarke Clarke PTO13/2 230V 13kVA Power Take Off Generator" |
| "Built for tough daily use, the PTO13/2 from Clarke is a top quality, industrial grade power take off generator which provides a reliable source of essential power on site. Featuring a heavy duty, continuous rated alternator, oil bath PTO gearbox with shaft guard, high starting capacity specific for electric motors, control box with meters for Volts, Amps and frequency, overload protection and CE sockets to BS4343. Ideal for the construction industry, farming and agriculture and more, this generator is useful on any work site with vehicles featuring Power Take Off Shafts such as tractors or trucks."
Price: 1474.80 |
| "Clarke Clarke 230V 16A 2-Way Adaptor Plug" |
| "2 Way Splitter - One 230 Volt plug to Two 230 Volt Sockets"
Price: 26.39 |
| "Clarke Clarke 93pce Circuit Tester and Car Fuse Kit - CHT570" |
| "All the fuses you will ever need in one handy set. This useful kit also comes complete with a fuse tester and a fuse remover. Supplied in a tidy storage case with separate compartments to ensure fuses do not mix."
Price: 8.39 |
| "Clarke 3hp Single Phase 2-Pole Motor" |
| "Suited to a variety of applications, this totally enclosed fan cooled 230V motor provides reliable long term service.Please click here to see our handy frame sizing guide. "
Price: 179.98 |
| "Clarke Clarke - BK114 - Compressor Pump" |
| "Ideal as a standard replacement unit or for special project builds, this sturdy industrial duty pump, featuring also at the heart of model SE25 and similar blue line compressors, assures solid dependable performance with long term reliability."
Price: 442.80 |
| "Clarke Clarke PS560 Gas Torch Kit" |
| "A comprehensive LPG torch kit capable of dealing with a wide range of heating, brazing, burning and soldering jobs using propane gas."
Price: 87.59 |
| "Clarke Clarke DCL16A Three Phase 16 Amp Connecting Lead (400V)" |
| "Connecting extension lead for use with Clarke Devil 6005 (5kW) & Clarke Devil 6009 (9kW) electric fan heaters."
Price: 23.98 |
| "Clarke Clarke 3/8"" Reversible Air Drill - CAT100" |
| "General purpose, precision engineered, compressed air powered drill with comfortable pistol style handle. This compact, lightweight and reversible unit is ideal for general workshop, garage or factory use."
Price: 41.99 |
| "Clarke Direct On-Line (DOL) Starter 10-16Amp" |
| "This Direct On-Line (DOL) Starter is suitable for single or 3 phase supplies/motors. Select the correct model according to the Amperage of your motor."
Price: 35.98 |
| "Clarke Belts for CAT70 60 Grit 5 pack" |
| "A pack of 5 belts for the Clarke CAT70 Heavy Duty Air Belt Sander"
Price: 10.79 |
| "Clarke Clarke PVC Ducting for the CAM250" |
| "A really useful length of flexible PVC ducting for the Clarke CAM250 Ventilator. Used with the CAM250 allows for particular locations or areas within a building to be ventilated."
Price: 71.98 |
| "Clarke Clarke MIG 180 No-Gas/Gas MIG Welder" |
| "The MIG180 is a dual purpose machine that offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases. Easy conversion to gas welding with optional accessories. Ready to go, just add either of our readymade accessory packs (see related items below)"
Price: 233.99 |
