| "ForgeFix DWS42 Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 42mm..." |
| "ForgeFix Drywall Screw Phillips Bugle Head TFT ZP - ForgeFix DWS42, These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWS42 Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 42mm Bulk 1000"
Price: 8.92 |
| "ForgeFix DWS50 Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 50mm..." |
| "ForgeFix Drywall Screw Phillips Bugle Head TFT ZP - ForgeFix DWS50, These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWS50 Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 50mm Bulk 1000"
Price: 10.84 |
| "ForgeFix DWS60 Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 60mm..." |
| "ForgeFix Drywall Screw Phillips Bugle Head TFT ZP - ForgeFix DWS60, These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWS60 Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 60mm Bulk 500"
Price: 6.77 |
| "ForgeFix DWS65 Drywall Screw Phillips Bugle Head TFT ZP 4.2 x 65mm..." |
| "ForgeFix Drywall Screw Phillips Bugle Head TFT ZP - ForgeFix DWS65, These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWS65 Drywall Screw Phillips Bugle Head TFT ZP 4.2 x 65mm Bulk 500"
Price: 12.08 |
| "ForgeFix DWS75 Drywall Screw Phillips Bugle Head TFT ZP 4.2 x 75mm..." |
| "ForgeFix Drywall Screw Phillips Bugle Head TFT ZP - ForgeFix DWS75, These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWS75 Drywall Screw Phillips Bugle Head TFT ZP 4.2 x 75mm Bulk 500"
Price: 10.07 |
| "ForgeFix DWS100 Drywall Screw Phillips Bugle Head TFT ZP 4.2 x 100..." |
| "ForgeFix Drywall Screw Phillips Bugle Head TFT ZP - ForgeFix DWS100, These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWS100 Drywall Screw Phillips Bugle Head TFT ZP 4.2 x 100mm Bulk 500"
Price: 13.75 |
| "ForgeFix DWSWHSD13 Drywall Screw Wafer Head Self Drill TFT ZP 4.2x..." |
| "ForgeFix Drywall Screw Wafer Head Self Drill TFT ZP - ForgeFix DWSWHSD13, Includes Phillips No.2 insert bit. Zinc Plated for increased durability. Self Drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes. ForgeFix DWSWHSD13 Drywall Screw Wafer Head Self Drill TFT ZP 4.2x13mm Bulk 1000"
Price: 11.68 |
| "ForgeFix DWSWH13 Drywall Screw Wafer Head TFT ZP 4.2 x 13mm Bulk 1000" |
| "ForgeFix Drywall Screw Wafer Head Self Drill TFT ZP - ForgeFix DWSWH13, The Forgefix Phillips fine thread, wafer head Drywall Screws are zinc plated for increased durability. They come complete with a Phillips No.2 insert bit. The screws have a self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. Zinc plating is the most common, economy, electroplated coating which is normally applied to ferrous components to give enhanced corrosion protection. The relatively low cost, protective nature and attractive appearance of zinc make it a popular coating for nuts, bolts, washers, screws, and similar interior components. In addition, zinc serves as an effective undercoat for paints when high corrosion performance is required. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. The wafer head distributes the load under the screw head, offering a firm positive fixing in a similar way to that of a washer. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures. ForgeFix DWSWH13 Drywall Screw Wafer Head TFT ZP 4.2 x 13mm Bulk 1000"
Price: 7.33 |
| "ForgeFix 10EYE6 Eye Bolt Zinc Yellow Passivated M6 Bag 10" |
| "ForgeFix Eye Bolt Zinc Yellow Passivated - ForgeFix 10EYE6, These Forgefix Eye Bolts are Zinc Yellow Passivated for increased durability and corrosion resistance. They have a tough and reliable construction, and are ideal for most heavy-duty fixing applications. The four-way expansion shield offer extremely strong and secure anchorage. The bolts' specially manufactured retaining springs ensure encapsulation of the wedge during expansion. Eye bolts are commonly used to attach cables to objects for lifting or holding in place. Ensure the correct spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. ForgeFix 10EYE6 Eye Bolt Zinc Yellow Passivated M6 Bag 10"
Price: 4.48 |
| "ForgeFix 10EYE8 Eye Bolt Zinc Yellow Passivated M8 Bag 10" |
| "ForgeFix Eye Bolt Zinc Yellow Passivated - ForgeFix 10EYE8, These Forgefix Eye Bolts are Zinc Yellow Passivated for increased durability and corrosion resistance. They have a tough and reliable construction, and are ideal for most heavy-duty fixing applications. The four-way expansion shield offer extremely strong and secure anchorage. The bolts' specially manufactured retaining springs ensure encapsulation of the wedge during expansion. Eye bolts are commonly used to attach cables to objects for lifting or holding in place. Ensure the correct spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. ForgeFix 10EYE8 Eye Bolt Zinc Yellow Passivated M8 Bag 10"
Price: 6.48 |
| "ForgeFix 5EYE10 Eye Bolt Zinc Yellow Passivated M10 Bag 5" |
| "ForgeFix Eye Bolt Zinc Yellow Passivated - ForgeFix 5EYE10, These Forgefix Eye Bolts are Zinc Yellow Passivated for increased durability and corrosion resistance. They have a tough and reliable construction, and are ideal for most heavy-duty fixing applications. The four-way expansion shield offer extremely strong and secure anchorage. The bolts' specially manufactured retaining springs ensure encapsulation of the wedge during expansion. Eye bolts are commonly used to attach cables to objects for lifting or holding in place. Ensure the correct spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. ForgeFix 5EYE10 Eye Bolt Zinc Yellow Passivated M10 Bag 5"
Price: 5.09 |
| "ForgeFix 5EYE12 Eye Bolt Zinc Yellow Passivated M12 Bag 5" |
| "ForgeFix Eye Bolt Zinc Yellow Passivated - ForgeFix 5EYE12, These Forgefix Eye Bolts are Zinc Yellow Passivated for increased durability and corrosion resistance. They have a tough and reliable construction, and are ideal for most heavy-duty fixing applications. The four-way expansion shield offer extremely strong and secure anchorage. The bolts' specially manufactured retaining springs ensure encapsulation of the wedge during expansion. Eye bolts are commonly used to attach cables to objects for lifting or holding in place. Ensure the correct spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. ForgeFix 5EYE12 Eye Bolt Zinc Yellow Passivated M12 Bag 5"
Price: 7.87 |
| "ForgeFix 500NLF13GB Felt Nail Galvanised 13mm Bag Weight 500g" |
| "ForgeFix Felt Nail Galvanised - ForgeFix 500NLF13GB, These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion. Suitable for roofing of all types. Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged. ForgeFix 500NLF13GB Felt Nail Galvanised 13mm Bag Weight 500g"
Price: 2.98 |
| "ForgeFix 212NLF13GB Felt Nail Galvanised 13mm Bag Weight 2.5kg" |
| "ForgeFix Felt Nail Galvanised - ForgeFix 212NLF13GB, These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion. Suitable for roofing of all types. Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged. ForgeFix 212NLF13GB Felt Nail Galvanised 13mm Bag Weight 2.5kg"
Price: 10.45 |
| "ForgeFix 500NLF20GB Felt Nail Galvanised 20mm Bag Weight 500g" |
| "ForgeFix Felt Nail Galvanised - ForgeFix 500NLF20GB, These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion. Suitable for roofing of all types. Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged. ForgeFix 500NLF20GB Felt Nail Galvanised 20mm Bag Weight 500g"
Price: 2.39 |
| "ForgeFix 212NLF20GB Felt Nail Galvanised 20mm Bag Weight 2.5kg" |
| "ForgeFix Felt Nail Galvanised - ForgeFix 212NLF20GB, These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion. Suitable for roofing of all types. Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged. ForgeFix 212NLF20GB Felt Nail Galvanised 20mm Bag Weight 2.5kg"
Price: 10.45 |
| "ForgeFix 10MUDWASH650 Flat Mudguard Washers ZP M6 x 50mm Bag 10" |
| "ForgeFix Flat Mudguard Washers ZP - ForgeFix 10MUDWASH650, These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10MUDWASH650 Flat Mudguard Washers ZP M6 x 50mm Bag 10"
Price: 2.05 |
| "ForgeFix 10MUDWASH850 Flat Mudguard Washers ZP M8 x 50mm Bag 10" |
| "ForgeFix Flat Mudguard Washers ZP - ForgeFix 10MUDWASH850, These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10MUDWASH850 Flat Mudguard Washers ZP M8 x 50mm Bag 10"
Price: 1.28 |
| "ForgeFix 10MUDWASH1050 Flat Mudguard Washers ZP M10 x 50mm Bag 10" |
| "ForgeFix Flat Mudguard Washers ZP - ForgeFix 10MUDWASH1050, These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10MUDWASH1050 Flat Mudguard Washers ZP M10 x 50mm Bag 10"
Price: 1.28 |
| "ForgeFix 10MUDWASH1250 Flat Mudguard Washers ZP M12 x 50mm Bag 10" |
| "ForgeFix Flat Mudguard Washers ZP - ForgeFix 10MUDWASH1250, These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10MUDWASH1250 Flat Mudguard Washers ZP M12 x 50mm Bag 10"
Price: 1.28 |
| "ForgeFix 10PENY5 Flat Penny Washer ZP M5 x 25mm Bag 10" |
| "ForgeFix Flat Penny Washer ZP - ForgeFix 10PENY5, These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10PENY5 Flat Penny Washer ZP M5 x 25mm Bag 10"
Price: 0.67 |
| "ForgeFix 10PENY6 Flat Penny Washer ZP M6 x 25mm Bag 10" |
| "ForgeFix Flat Penny Washer ZP - ForgeFix 10PENY6, These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10PENY6 Flat Penny Washer ZP M6 x 25mm Bag 10"
Price: 0.67 |
| "ForgeFix 10PENY8 Flat Penny Washer ZP M8 x 25mm Bag 10" |
| "ForgeFix Flat Penny Washer ZP - ForgeFix 10PENY8, These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10PENY8 Flat Penny Washer ZP M8 x 25mm Bag 10"
Price: 0.55 |
| "ForgeFix 10PENY10 Flat Penny Washer ZP M10 x 25mm Bag 10" |
| "ForgeFix Flat Penny Washer ZP - ForgeFix 10PENY10, These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10PENY10 Flat Penny Washer ZP M10 x 25mm Bag 10"
Price: 0.67 |
| "ForgeFix 10PENY12 Flat Penny Washer ZP M12 x 25mm Bag 10" |
| "ForgeFix Flat Penny Washer ZP - ForgeFix 10PENY12, These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10PENY12 Flat Penny Washer ZP M12 x 25mm Bag 10"
Price: 0.67 |
| "ForgeFix 10REPWASH640 Flat Repair Washers ZP M6 x 40mm Bag 10" |
| "ForgeFix Flat Repair Washers ZP - ForgeFix 10REPWASH640, These Forgefix Flat Repair Washers have a large 40mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10REPWASH640 Flat Repair Washers ZP M6 x 40mm Bag 10"
Price: 1.37 |
| "ForgeFix 10REPWASH840 Flat Repair Washers ZP M8 x 40mm Bag 10" |
| "ForgeFix Flat Repair Washers ZP - ForgeFix 10REPWASH840, These Forgefix Flat Repair Washers have a large 40mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10REPWASH840 Flat Repair Washers ZP M8 x 40mm Bag 10"
Price: 1.37 |
| "ForgeFix 10REPWASH1040 Flat Repair Washers ZP M10 x 40mm Bag 10" |
| "ForgeFix Flat Repair Washers ZP - ForgeFix 10REPWASH1040, These Forgefix Flat Repair Washers have a large 40mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10REPWASH1040 Flat Repair Washers ZP M10 x 40mm Bag 10"
Price: 0.86 |
| "ForgeFix 10REPWASH1240 Flat Repair Washers ZP M12 x 40mm Bag 10" |
| "ForgeFix Flat Repair Washers ZP - ForgeFix 10REPWASH1240, These Forgefix Flat Repair Washers have a large 40mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 10REPWASH1240 Flat Repair Washers ZP M12 x 40mm Bag 10"
Price: 0.86 |
| "ForgeFix 100WASH3 Flat Washer Form B ZP M3 Bag 100" |
| "ForgeFix Flat Washer Form B ZP - ForgeFix 100WASH3, These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 100WASH3 Flat Washer Form B ZP M3 Bag 100"
Price: 0.95 |
| "ForgeFix 100WASH4 Flat Washer Form B ZP M4 Bag 100" |
| "ForgeFix Flat Washer Form B ZP - ForgeFix 100WASH4, These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. ForgeFix 100WASH4 Flat Washer Form B ZP M4 Bag 100"
Price: 1.05 |
