| "Trend CRAFTPRO Two Flute Straight Router Cutter 18.25mm 19mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. DIMENSIONS: D1: 23/32 inches D1: 18.25 mm C: 3/4 in..."
Price: 19.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 15.9mm 12.7mm 1/4""" |
| "Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. D: 5/8 inch D: 15.9mm C: 1/2 inch C: 12.7 mm OL: 58.5 mm Shank Diameter: 1/4 inch ..."
Price: 20.95 |
| "Trend TRADE Bearing Guided Profiler Router Cutter 12.7mm 25.4mm 1/4""" |
| "For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwoo..."
Price: 24.95 |
| "Trend Threaded Insert for Plastics M8 Thread Pack of 50" |
| "Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. M6 inserts have slot on base and M8 inserts have slot on..."
Price: 42.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 8mm 19mm 8mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 17.95 |
| "Trend Bearing Guided Template Profiler Router Cutter 19.1mm 50mm 1/2""" |
| "Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. D: 3/4 inch D: 19.1 mm C: 1 31/32 inch C: 50 mm OL: 94.5 mm Shank Diameter: 1/2 inch..."
Price: 38.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 19mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15/32 inch D: 12 mm C: 19 mm C: 3/4 inch OL: 7..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 35mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 3/8 inch D: 35 mm C: 25 mm OL: 67 mm Shank Di..."
Price: 42.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 31.8mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.7 mm C: 1 1/4 inch C: 31.8 mm OL..."
Price: 16.95 |
| "Trend HSS Drill Countersink Size 4 1/2""" |
| "They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Pl..."
Price: 19.95 |
| "Trend CRAFTPRO Triple Flute Engraver Router Cutter 14.5mm 13mm 1/4""" |
| "Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. D: 19/32 inch D: 15.1 mm A: 60 degrees OL: 70.5 mm Shank Diameter: 1/4 Shank Diameter: 1/4 Dia Metric: 15.1 Dia Imp..."
Price: 32.95 |
| "Trend Threaded Insert for Plastics M8 Thread Pack of 10" |
| "Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. M6 inserts have slot on base and M8 inserts have slot on..."
Price: 10.95 |
| "Trend CRAFTPRO Bearing Guided Biscuit Jointer Set 4mm 37.2mm 1/4""" |
| "This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit i..."
Price: 35.95 |
| "Trend Replacement Cutter Bearings Metric OD 16mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Bosch SDS Plus Chuck Adaptor" |
| "It is compatible with rotary hammers. The Chuck Adapter for drill chucks connects 1/2-inch-20 UNF chucks to SDS plus hammers. • Connects 1/2-inch-20 UNF Chucks to SDS plus Hammers • Chuck Adapter for drill chucks connects 1/2-inch-20 UN..."
Price: 20.95 |
| "Bosch Impact Control 35 Piece Drill and Screwdriver Bit Set" |
| "The Pick and Click MultiConstruction Drill and Impact Control Screwdriver Bit Set, 35-Pieces is a customisable set containing highly robust bits that are ideal for heavy duty applications. The screwdriver bits feature an extended torsion zone that ma..."
Price: 45.95 |
| "Makita 71 Piece MakPac Drill and Screwdriver Bit Set" |
| "71 piece drilling & driving set supplied in a robust Makpac connector case...."
Price: 79.95 |
| "Bosch SDS Keyed Chuck" |
| "The Keyed Drill Chuck is a simple and reliable solution for fixing drill bits for any type of job. It provides a consistently strong clamping force that securely fastens cylindrical or hex shank drill bits. Its jaws are conveniently tightened and loo..."
Price: 77.95 |
| "Starrett KFC11021 13 Piece Deluxe Electricians Hole Saw Set" |
| "13 piece deluxe electricians fast cut Bi-metal hole saw kit. Specifications • Hole saw sizes: 16mm, 20mm, 22mm, 25mm, 29mm, 35mm, 44mm, 51mm, 64mm, 68mm, 76mm • Arbor sizes: A1 & A2Features & Benefits•..."
Price: 96.95 |
| "Faithfull 3 Piece Diamond Cutting Disc Set" |
| "The Faithfull 115mm Diamond Blade Bonus Pack contains: 1 x Turbo Blade that has been designed to cut faster than standard blades and is perfect for the smooth cutting of tile products. It is also ideal for cutting: slate, marble, vitrified ..."
Price: 9.95 |
| "Frys Plumbers Solder 1000g" |
| "Plumber's metal is Belfry brand solder, rich in alloy giving a smooth, buttery wipe. Approximately 1 Kilo. Also known as body lead.Type: Plumbers SolderSize: 1kg..."
Price: 31.95 |
| "Garryson Abrasive Flap Wheel 60mm 30mm Medium" |
| "Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many u..."
Price: 9.95 |
| "Sirius Professional HSS Jobber Drill Bit 10.6mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 7.49 |
| "Sirius Professional HSS Jobber Drill Bit 10.7mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 7.95 |
| "Sirius Professional HSS Jobber Drill Bit 10.75mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 9.95 |
| "Sirius Professional HSS Jobber Drill Bit 10.9mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 7.49 |
| "Sirius Professional HSS Jobber Drill Bit 11mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 5.95 |
| "Sirius Professional HSS Jobber Drill Bit 11.1mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 8.95 |
| "Sirius Professional HSS Jobber Drill Bit 11.25mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 10.95 |
| "Sirius Professional HSS Jobber Drill Bit 11.3mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 8.95 |
| "Sirius Professional HSS Jobber Drill Bit 11.4mm" |
| "Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit..."
Price: 9.95 |
