| "Irwin 10502854 Step Drill 5mm to 35mm (13 Steps in 2 to 3mm Increm..." |
| Irwin-10502854-Step-Drill-5mm-to-35mm-13-steps-Irwin-10502854-P-This-Irwin-step-drill-bit-has-been-designed-to-enlarge-a-hole-as-the-bit-drills-cleanly-and-accurately-through-the-surface-P-P-Use-this-step-drill-bit-for-precision-drilling-of-holes-up-to-35mm-diameter-in-steel-brass-copper-aluminium-wood-and-plastic-sheets-P-Irwin-10502854-Step-Drill-5mm-to-35mm-13-Steps-in-2-to-3mm-Increments-
Price: 70.01 |
| "Irwin 10507720 Blue Groove Power Bit Set (14, 16, 18mm)" |
| "Irwin Blue Groove Power Bit Sets - Irwin 10507720, These Blue Groove wood drill bits have a 6x faster penetration than a standard flat bit. Each bit has been fully heat treated for extra durability. The Tri-flute tapered flute design gives faster chip ejection and less binding during use. Irwin 10507720 Blue Groove Power Bit Set (14, 16, 18mm)"
Price: 18.00 |
| "Irwin 10504309N Aviation Snips 101 - Left & Straight Cut" |
| "Irwin Aviation Snips - Irwin 10504309N, These aviation snips are specifically suited to cutting left and straight cuts. Irwin 10504309N Aviation Snips 101 - Left & Straight Cut"
Price: 16.07 |
| "Irwin 10504311N Aviation Snips 103 - Straight & Wide Curves" |
| "Irwin Aviation Snips - Irwin 10504311N, This range of aviation snips are specifically suited to straight and wide curves. Irwin 10504311N Aviation Snips 103 - Straight & Wide Curves"
Price: 13.93 |
| "Irwin 10504634 Bolt Grip Fastener Remover 5 Piece Base Set" |
| "Irwin Bolt Grip Fastener Remover Sets - Irwin 10504634, Professionals do not want to waste time fighting rounded off, rusted tight or painted-over bolts. They reach for the Irwin Bolt-Grip. This is a unique, reverse spiral flute design which securely grips and removes stubborn nuts and bolts. The bolt grip is supplied in a set of 5 Grip Fastener Removers for use with rounded or heavily painted bolts. The unique reverse spiral flute design securely grips and removes stubborn nuts and bolts. Suitable for use with a hand ratchet 3/8 inch square drive and has hexagon flats for use with a spanner or adjustable wrench. Irwin 10504634 Bolt Grip Fastener Remover 5 Piece Base Set"
Price: 32.89 |
| "Irwin 10504635 Bolt Grip Fastener Remover Expansion Set" |
| "Irwin Bolt Grip Fastener Remover Sets - Irwin 10504635, Professionals do not want to waste time fighting rounded off, rusted tight or painted-over bolts. They reach for the Irwin Bolt-Grip remover expansion set. Irwin 10504635 Bolt Grip Fastener Remover Expansion Set"
Price: 25.81 |
| "Irwin TG2458 Gilbow G245/8 General Purpose Tin Snips 8in / 200mm" |
| "Irwin Gilbow General Purpose Tin Snips - Irwin TG2458, Irwin Gilbow General Purpose 200mm Tin Snips have a cutting capability much greater than the strength of the user. The long handles multiply the user's effort to enable thicker material to be cut. They are ideal for all general-purpose sheet metal cutting and trimming. Irwin TG2458 Gilbow G245/8 General Purpose Tin Snips 8in / 200mm"
Price: 18.38 |
| "Irwin TG950 Gilbow Straight Handled Shears 12in / 300mm" |
| Irwin-Gilbow-TG950-Straight-Handled-Shears-12in-300mm-Irwin-TG950-P-These-Irwin-Gilbow-snips-have-a-cutting-capability-much-greater-than-the-strength-of-the-user-The-original-tin-snips-were-first-designed-in-1924-and-have-dominated-the-sheet-metal-cutting-industry-to-such-an-extent-that-today-snips-and-shears-are-referred-to-as-Gilbows-P-P-The-Irwin-Gilbow-are-jointed-with-a-nut-and-bolt-design-essential-in-ensuring-the-longest-possible-life-of-the-joint-whilst-keeping-a-good-easy-smo
Price: 41.65 |
| "Irwin 10503534 Tenon XP3055-300 12in/ 300mm 12T / 13P" |
| Irwin-Tenon-Saw-12-inch-300mm-Irwin-10503534-P-The-Irwin-12-inch-tenon-saw-is-ideal-for-cutting-traditional-mortice-and-tenon-joints-It-also-perfect-for-cutting-mitres-and-general-fine-wood-cutting-tasks-The-steel-back-to-the-blade-keeps-the-blade-rigid-for-straight-cutting-P-P-Can-also-be-used-for-cutting-PVC-pipe-plastic-conduit-etc-P-Irwin-10503534-Tenon-XP3055-300-12in-300mm-12T-13P
Price: 10.99 |
| "Irwin 10505212 Panel Saw Universal 880 Triple Ground 20'' / 500mm ..." |
| "Irwin Panel Saws Universal 880 Triple Ground 8T/9P - Irwin 10505212, The Irwin Universal 880 Triple Ground Hardpoint Saw is fitted with a high quality C75 steel blade. It features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The 880 saw is ideal for all wood cutting applications. The blade is treated with a water based lacquer providing four times the added protection than conventional anti-rust agents. Irwin 10505212 Panel Saw Universal 880 Triple Ground 20'' / 500mm 8T / 9P"
Price: 14.20 |
| "Irwin 10503430 Marples MS500 Soft Touch Bevel Edge Chisel Set of 6" |
| "Irwin Marples MS500 Soft Touch Bevel Edge Chisel Sets - Irwin 10503430, The Irwin split-proof pro bevel edge chisel is a carbon rich blade manufactured in a solid one-piece forging which is then hardened and tempered up to the last inch for a long working life. The guaranteed split-proof handle helps absorb harmful vibrations. It features a highly durable friction grip and sturdy neck and bolster which is honed and sharpened. The metal striking cap allows use with a hammer, prolongs the life of the handle and prevents mushrooming. Irwin 10503430 Marples MS500 Soft Touch Bevel Edge Chisel Set of 6"
Price: 74.58 |
| "Irwin 10505943 Quick-Grip XP Bar Clamp & Spreader - 300mm / 12in" |
| "Irwin Quick-Grip XP One-Handed Trigger Bar Clamps / Spreaders - Irwin 10505943, This Irwin 300mm Quick-Grip XP One-Handed Trigger Bar Clamp / Spreader has been specially designed for gluing applications. The clamp has lockable swivel jaws to ensure that both jaws are always parallel and pressure is evenly distributed. Irwin 10505943 Quick-Grip XP Bar Clamp & Spreader - 300mm / 12in"
Price: 24.32 |
| "Irwin T506QCEL7 Quick-Grip Quick-Change Bar Clamp 6in / 150mm" |
| "Irwin Quick-Grip Quick-Change One-Handed Trigger Bar Clamps / Spreaders - Irwin T506QCEL7, This Irwin 150mm Quick-Grip One-Handed Trigger Bar Clamp / Spreader has been specially designed for fast, general purpose clamping. The clamp has a lockable swivel jaw that allows uneven surfaces to be clamped and ensures that pressure is evenly distributed. Irwin T506QCEL7 Quick-Grip Quick-Change Bar Clamp 6in / 150mm"
Price: 19.34 |
| "Irwin T512QCEL7 Quick-Grip Quick-Change Bar Clamp 12in / 300mm" |
| "Irwin Quick-Grip Quick-Change One-Handed Trigger Bar Clamps / Spreaders - Irwin T512QCEL7, This Irwin 300mm Quick-Grip One-Handed Trigger Bar Clamp / Spreader has been specially designed for fast, general purpose clamping. The clamp has a lockable swivel jaw that allows uneven surfaces to be clamped and ensures that pressure is evenly distributed. Irwin T512QCEL7 Quick-Grip Quick-Change Bar Clamp 12in / 300mm"
Price: 22.48 |
| "Irwin T524QCEL7 Quick-Grip Quick-Change Bar Clamp 24in / 605mm" |
| "Irwin Quick-Grip Quick-Change One-Handed Trigger Bar Clamps / Spreaders - Irwin T524QCEL7, This Irwin 605mm Quick-Grip One-Handed Trigger Bar Clamp / Spreader has been specially designed for fast, general purpose clamping. The clamp has a lockable swivel jaw that allows uneven surfaces to be clamped and ensures that pressure is evenly distributed. Irwin T524QCEL7 Quick-Grip Quick-Change Bar Clamp 24in / 605mm"
Price: 32.62 |
| "Irwin T6TON6VS Record Workshop Vice With Anvil 6in / 150mm With Sw..." |
| Irwin-Record-Workshop-Vice-With-Anvil-6-inch-150mm-With-Swivel-Base-Irwin-T6TON6VS-p-UL-LI-Body-and-sliding-jaw-are-cast-from-close-grained-grey-iron-LI-CNC-manufactured-on-all-friction-surfaces-for-a-smooth-reliable-action-LI-Jaws-and-handle-are-steel-LI-Steel-main-screw-has-a-two-start-rolled-acme-thread-to-speed-the-jaws-from-fully-closed-to-fully-open-with-a-minimum-of-winding-LI-UL-p-Irwin-T6TON6VS-Record-Workshop-Vice-With-Anvil-6in-150mm-With-Swivel-Base
Price: 174.31 |
| "Irwin T300/24 Record 300 Stillson Wrench 24in" |
| "Irwin Record 300 Series Stillson Pipe Wrenches - Irwin T300/24, A 600mm adjustable wrench with a sprung jaw which, when used in the right direction of rotation, tightens to firmly grip pipes and fittings, etc. Irwin T300/24 Record 300 Stillson Wrench 24in"
Price: 104.76 |
| "Irwin T1192 Record 119 Medium-Duty Forged G Clamp 50mm / 2in" |
| "Irwin Record 119 Medium-Duty Forged G Clamps - Irwin T1192, Irwin Record 119 Medium-Duty Forged 50mm G Clamps are very strong and rigid, and have a thinner frame shape allowing them to get into tight corners and confined spaces. Irwin T1192 Record 119 Medium-Duty Forged G Clamp 50mm / 2in"
Price: 6.05 |
| "Irwin 10505868 Vise-Grip VDE Bent Nose Pliers 6in / 150mm" |
| Irwin-Vise-Grip-VDE-Bent-Nose-Pliers-6-in-150mm-Irwin-10505868-P-These-Irwin-Vise-Grip-VDE-pliers-are-manufactured-from-chrome-nickel-steel-for-improved-durability-on-the-gripping-and-cutting-face-Featuring-moulded-pull-resistant-one-component-handles-for-added-comfort-and-less-hand-fatigue-P-Irwin-10505868-Vise-Grip-VDE-Bent-Nose-Pliers-6in-150mm
Price: 16.22 |
| "Irwin 10505865 Vise-Grip VDE Diagonal Cutters 6in / 150mm" |
| Irwin-10505865-Vise-Grip-VDE-Diagonal-Cutters-6-inch-150mm-Irwin-10505865-P-These-Irwin-Vise-Grip-VDE-cutting-pliers-are-designed-to-cut-wire-up-to-a-diameter-of-2mm-They-have-been-manufactured-from-chrome-nickel-steel-for-improved-durability-on-the-gripping-and-cutting-face-Featuring-moulded-pull-resistant-one-component-handles-for-added-comfort-and-less-hand-fatigue-P-P-IRWIN-Vise-Grip-VDE-pliers-can-be-used-safely-to-work-on-components-while-electrically-live-up-to-1000V-AC-P-Irw
Price: 19.15 |
| "Irwin 10505519 Vise-Grip VDE Combination Pliers Set of 3" |
| Irwin-10505519-Vise-Grip-VDE-Combination-Pliers-Set-Of-3-Irwin-10505519-P-A-set-of-three-Irwin-Vise-Grip-VDE-pliers-that-are-designed-to-be-used-safely-for-work-on-components-while-electrically-is-still-live-up-to-1000V-AC-BR-They-have-been-manufactured-from-chrome-nickel-steel-for-improved-durability-on-the-gripping-and-cutting-face-Featuring-moulded-pull-resistant-one-component-handles-for-added-comfort-and-less-hand-fatigue-P-Irwin-10505519-Vise-Grip-VDE-Combination-Pliers-Set-of-3
Price: 40.86 |
| "Irwin 10505823 Bi-Metal BLUE Safety Trapezoid Blades Pack of 5" |
| "Irwin Bi-Metal Blue Trapezoid Safety Blades - Irwin 10505823, These Trapezoid safety knife blades combine the toughness of a traditional trapezoid blade with extra safety by reducing the risk of accidental puncture wounds due to their snub-nose design. These Trapezoid safety knife replacement blades will fit all the most popular knives that use the two notch blades. Irwin 10505823 Bi-Metal BLUE Safety Trapezoid Blades Pack of 5"
Price: 2.64 |
| "Irwin T0502EL4 Vise-Grip Curved Jaw Locking Plier with Wire Cutter..." |
| Irwin-T0502EL4-Vise-Grip-Curved-Jaw-Locking-Plier-with-Wire-Cutter-10-inch-250mm-Irwin-T0502EL4-P-These-curved-jaw-locking-pliers-with-built-in-wire-cutter-are-great-for-a-variety-of-applications-and-material-shapes-These-pliers-are-perfect-for-general-purpose-with-maximum-strength-and-gripping-capacity-P-Irwin-T0502EL4-Vise-Grip-Curved-Jaw-Locking-Plier-with-Wire-Cutter-10in-250mm
Price: 15.42 |
| "Irwin 10508103 DryWaller Knife" |
| Irwin-10508103-DryWaller-Fixed-Knife-Irwin-10508103-A-professional-quality-knife-specially-designed-for-cutting-drywall-sheets-It-has-a-fixed-blade-and-slim-nose-for-great-visibility-of-the-scoring-line-Irwin-10508103-DryWaller-Knife
Price: 7.75 |
| "Irwin 10506437 I-75 Low Tension Hacksaw Frame 300mm (75kg / 15000PSI)" |
| Irwin-I-75-Low-Tension-Hacksaw-Frame-300mm-75kg-15000PSI-Irwin-10506437-P-The-Irwin-Hacksaw-is-a-low-tension-hacksaw-aimed-at-meeting-the-demands-of-professional-users-P-P-The-ergonomically-shaped-handle-ensures-a-comfortable-grip-and-the-90-deg-and-180-deg-blade-setting-options-are-a-handy-facility-The-I-75-has-a-maximum-75kg-tension-making-cutting-easier-P-Irwin-10506437-I-75-Low-Tension-Hacksaw-Frame-300mm-75kg-15000PSI-
Price: 13.13 |
| "Irwin 10504407 I-125 Hacksaw Frame 300mm (125kg / 25000PSI)" |
| Irwin-10504407-I-125-Hacksaw-Frame-300mm-125kg-25000PSI-Irwin-10504407-P-The-Irwin-hacksaw-frame-is-aimed-at-meeting-the-demands-of-professional-users-The-mushroom-pins-prevent-the-blade-from-being-released-when-the-saw-is-dropped-P-P-The-ergonomically-shaped-handle-ensures-a-comfortable-grip-and-the-90-deg-and-180-deg-blade-setting-options-are-a-handy-facility-The-I-125-is-able-to-reach-over-125kg-blade-tension-to-ensure-accurate-cutting-P-Irwin-10504407-I-125-Hacksaw-Frame-300
Price: 18.44 |
| "Irwin 10504521 Bi-metal Hacksaw Blades 300mm 12-inch / 24tpi Pack ..." |
| Irwin-Bi-metal-Hacksaw-Blades-300mm-12in-24tpi-Pack-Of-100-Irwin-10504521-P-Improve-your-cutting-performance-with-these-300mm-12-inch-24tpi-Irwin-bi-metal-high-quality-hacksaw-blades-Ideal-for-all-Irwin-hacksaws-high-and-low-tension-P-Irwin-10504521-Bi-metal-Hacksaw-Blades-300mm-12-inch-24tpi-Pack-of-100
Price: 244.76 |
| "Irwin 10503992 Pro Drill Set Turbomax 1.5-10.0mm 15 Piece" |
| Irwin-Turbomax-HSS-Drill-Bit-Sets-Irwin-10503992-P-The-Irwin-Turbo-Max-bits-are-a-range-of-drill-bits-suitable-for-portable-and-cordless-drills-P-Irwin-10503992-Pro-Drill-Set-Turbomax-1-5-10-0mm-15-Piece
Price: 60.41 |
| "Irwin 10506628 6X Blue Groove Wood Drill Bit Set of 6" |
| Irwin-10506628-6X-Blue-Groove-Wood-Drill-Bit-Set-of-6-Irwin-10506628-P-The-drill-bits-in-this-Blue-Groove-set-have-a-6x-faster-penetration-than-a-standard-flat-bit-Each-bit-has-been-fully-heat-treated-for-extra-durability-The-Tri-flute-tapered-flute-design-gives-faster-chip-ejection-and-less-binding-during-use-P-Irwin-10506628-6X-Blue-Groove-Wood-Drill-Bit-Set-of-6
Price: 52.68 |
| "Irwin 10501940 Cordless Multi-Purpose Drill Bit Set 7 Piece 4-12mm" |
| Irwin-10501940-Cordless-Multi-Drillbit-Set-7-Piece-Irwin-10501940-P-This-drill-bits-have-been-specifically-designed-for-use-with-cordless-low-RPM-multi-purpose-drilling-They-are-ideal-for-drilling-the-most-common-materials-including-brickwork-breeze-block-wood-dry-wall-slate-plastics-and-sheet-metal-P-P-Please-note-however-that-these-drill-bits-are-for-rotary-drilling-only-ndash-not-for-hammer-percussion-P-Irwin-10501940-Cordless-Multi-Purpose-Drill-Bit-Set-7-Piece-4-12mm
Price: 29.27 |
| "Irwin 10504310N Aviation Snips 102 - Right & Straight Cut" |
| "Irwin Aviation Snips - Irwin 10504310N, This range of aviation snips are specifically suited to cutting right and straight cuts. Irwin 10504310N Aviation Snips 102 - Right & Straight Cut"
Price: 15.30 |
