| "Trend Up Down Shear Router Cutter 12.7mm 38.1mm 1/2""" |
| "Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoods and natural timbers. These cutters have the action of pushing the chips towards the middle of the b..."
Price: 43.95 |
| "Trend TCT Cylinder Boring Bit 203 Series Left Hand Rotation 20mm" |
| "Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat..."
Price: 48.95 |
| "Trend Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2""" |
| "Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. Wh..."
Price: 62.95 |
| "Trend CRAFTPRO Chamfer V Grovve Router Cutter 32mm 22mm 1/2""" |
| "For veining, panelling, 'V' grooving, bevelling & chamfering. D: 1 1/4 inch D: 32 mm C: 23 mm C2: 17 mm C3: 23 mm A: 45 degrees Shank Diameter: 1/2 inch OL: 61 mm Shank Diameter: 1/2 Dia Metric: 32 Dia Imperial: 1 1/4 Cut Length Metric:..."
Price: 36.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 6.35MM 16mm 8mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 15.95 |
| "Trend Hand Hole Staff Bead Router Cutter 20mm 22mm 1/4""" |
| "With plunge cut these cutters can be used to cut and mould hand holes in stool seats. D: 20 mm C: 24 mm R: 18 mm OL: 63.6 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 20 Cut Length Metric: 22 Overall Length Metric: 63.6 Ra..."
Price: 57.95 |
| "Trend Panel Mould Bearing Guided Router Cutter 19.1mm 16mm 1/2""" |
| "Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose. D: 3/4 inch D: 19.1 mm C: 16 mm B: 19.1 mm A: 45 degrees OL: 63.5 mm Shank Diameter: 1/2 inch Shank Di..."
Price: 32.95 |
| "Trend CRAFTPRO Aluminium and Plastic Cutting Saw Blade 184mm 58T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain tr..."
Price: 20.95 |
| "Trend CRAFTPRO Bearing Guided Classic Broken Ogee Router Cutter 22mm 10mm 8mm" |
| "Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. D: 22 mm C: 25/64 inch C: 10 mm B: 22 mm R: 2.4 mm OL: 61 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 2..."
Price: 38.95 |
| "Trend WS Saw Tooth Forstner Drill Bit 3/8"" 1/4""" |
| "Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat-treated. They cut fast, with the grain or across it. Multi-spur peripheral tool with centre tip. They can drill overlapping holes in any direction and are chosen for ..."
Price: 20.95 |
| "Trend CRAFTPRO Sash Bar Router Cutter 22.2mm 14.3mm 1/4""" |
| "Ovolo cutter designed for sash bars but useful for decorative edging. D: 7/8 inch D: 22.2 mm C: 9/16 inch C: 14.3 mm R: 7.9 mm OL: 55 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 22.2 Dia Imperial: 7/8 Cut Length Metric:..."
Price: 32.95 |
| "Trend Pierce and Trim Two Flute Router Cutter 12.7mm 30mm 1/2""" |
| "Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. D: 1/2 inch D: 12.7 mm C: 30 mm OL: 87 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 12.7 ..."
Price: 40.95 |
| "Trend CRAFTPRO Radius Bearing Guided Router Cutter 19.1mm 14.3mm 1/4""" |
| "Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. C: 9/16 inch C: 14.3 mm D: 19.1 mm B: 9..."
Price: 26.95 |
| "Trend CRAFTPRO Wood Cutting Cordless Saw Blade 165mm 40T 30mm" |
| "Thin kerf sawblades for cordless saws. Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraz..."
Price: 14.95 |
| "Trend CRAFTPRO Radius Bearing Guided Router Cutter 28.5mm 14.3mm 1/4""" |
| "Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. C: 9/16 inch C: 14.3 mm D: 28.5 B: 9.5 ..."
Price: 37.95 |
| "Trend SNAPPY HSS Drill bit 3/32""" |
| "Replacement drill bit. D1: 3/32 inches D1: 2.38 mm OL: 58 mm Dia Metric: 2.38 Dia Imperial: 3/32 Overall Length Metric: 58 Type or Grade: No.6..."
Price: 1.95 |
| "Trend CRAFTPRO 3 Flute Bearing Guided Trimmer Router Cutter 12.7mm 25mm 1/4""" |
| "Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. D: 1/2 inch D: 12.7 mm C: 1 inch C: 25 mm B: 12.7 mm A: 90 degrees OL: 77 mm Shank Diameter: 1/4 inch Shank Diameter: 1/..."
Price: 18.95 |
| "Trend Chamfer V Groove Router Cutter 12.7mm 10.3mm 1/4""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 1/2 inch D: 12.7 mm C: 10.3 mm C2: 11.9 mm A: 60 degrees OL: 44.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia ..."
Price: 25.95 |
| "Trend Corner Bead Bearing Guided Router Cutter 28mm 25.7mm 1/2""" |
| "Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. TCT featuring Dnamic carbide with extended life for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes gi..."
Price: 60.95 |
| "Trend Pierce and Trim Two Flute Router Cutter 6.3mm 18mm 1/4""" |
| "Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted. D: 1/4 inch D: 6.3 mm C: 18 mm OL: 65 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia..."
Price: 20.95 |
| "Trend Snappy Metric Tap 4mm" |
| "For use in torque control screwdrivers on metals and plastics. Shank Diameter: 1/4 inch hex Tap size: M4 x 0.7 Shank Diameter: 1/4 hex Dia Metric: M4 Type or Grade: for M4..."
Price: 16.95 |
| "Trend Dovetail Cutter for DC400 Jig 11.3mm 13mm 1/4""" |
| "Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks. D: 11.3 mm C: 13 mm OL: 63 mm A: 101 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 11.3 Cut Length Metric: 13 Overall Length Metr..."
Price: 19.95 |
| "Trend Router Pip Drilling Cutter 12mm 9mm 1/4""" |
| "For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closer pips. D: 12 m..."
Price: 27.95 |
| "Trend Cove Bearing Guided Router Cutter 28.5mm 14mm 1/4""" |
| "The two bearings supplied offer the means of cutting different depths of mouldings. D: 1 1/8 inch D: 28.5 mm C: 14 mm B: 9.5 mm B2: 12.7 mm R: 3/8 inch R: 9.5 mm OL: 52 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 28.5 ..."
Price: 51.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 10mm 25mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 25/64 inch D: 10 mm C: 25 mm OL: 58 mm Shank Di..."
Price: 15.95 |
| "Trend Ovolo Rounding Over Router Cutter 35mm 17mm 1/2""" |
| "Some Ovolo cutters can be used with radius cutters, to make rule joints. D: 35 mm C: 17 mm R: 12 mm OL: 55.1 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35 Dia Imperial: 1 3/8 Cut Length Metric: 17 Overall Length Metric..."
Price: 57.95 |
| "Trend TRADE Bearing Guided Trimmer Router Cutter 6.35MM 12.7mm 8mm" |
| "For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used..."
Price: 16.95 |
| "Trend CRAFTPRO Giuded Pierce and Trim Router Cutter 6.3mm 18mm 1/4""" |
| "Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. D: 1/4 inch D: 6.3 mm C: 45/64 inch C: 18 mm OL: 77 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 6.3 Dia Imperial: 1/4 Cut Length M..."
Price: 16.95 |
| "Trend Snappy Hex Shank HSS Drill Bit 6mm" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. D: 6 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 6..."
Price: 5.49 |
| "Trend CRAFTPRO Stair Jig Housing Dovetail Router Cutter 16mm 26mm 1/2""" |
| "Purpose made for stair housing jigs. Ensures tight fit of tread in string. D: 5/8 inch D: 16 mm C: 26 mm OL: 65 mm A: 95 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 16 Dia Imperial: 5/8 Cut Length Metric: 26 Overa..."
Price: 29.95 |
| "Trend CRAFTPRO Bearing Guided Combination Raised Bevel Router Cutter 41mm 17mm 1/2""" |
| "The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by..."
Price: 51.95 |
