| "Trend CRAFTPRO Two Flute Straight Router Cutter 16mm 51MM 1/2""" |
| "Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Diameter: 16 mm C: 51 mm Shank ..."
Price: 33.95 |
| "Trend Staff Bead Bearing Gudied Router Cutter 26.1mm 25.4mm 1/2""" |
| ...
Price: 57.95 |
| "Trend Roman Ogee Bowl Bearing Guided No Lip Router Cutter 54mm 25mm 12mm" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For finishing undermount bowl. Without lip. D: 54 mm C: 25 mm B: 21.8 mm A: 75 degrees R: 12.7 mm Shank Diameter: ..."
Price: 63.95 |
| "Trend CRAFTPRO Bearing Guided Bevel Panel Raiser Router Cutter 86mm 12.7mm 12mm" |
| "Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass...."
Price: 57.95 |
| "Trend Chamfer V Groove Router Cutter 16mm 8mm 1/4""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 12.7 mm C: 8 mm C2: 11 mm OL: 51 mm A: 45 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 16 Cut Len..."
Price: 24.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 19mm 50mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15.0 mm C: 2 inch C: 50 mm OL: 89 mm Shank Diam..."
Price: 31.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 3mm 12mm 8mm" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 17.95 |
| "Trend Solid Carbide Rasp Router Cutter 6.35MM 20mm 1/4""" |
| "Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. D: 1/4 inch D: 6.3 mm C: 20 mm OL: 51 mm Shank Diameter: 1/4 inch Shank..."
Price: 39.95 |
| "Trend Bull Nose Round Over Combination Router Cutter 27mm 12.5mm 1/4""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. D: 27 mm C: 12.5 mm B: 12.7 mm R: 8 mm OL: 52 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 27 C..."
Price: 56.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 7mm 14mm 8mm" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 20.95 |
| "Trend CRAFTPRO Sash Bar Router Cutter 19.1mm 12.7mm 1/4""" |
| "Ovolo cutter designed for sash bars but useful for decorative edging. D: 3/4 inch D: 19.1 mm C: 1/2 inch C: 12.7 mm R: 6.3 mm OL: 53 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: ..."
Price: 35.95 |
| "Trend Bull Nose Round Over Combination Router Cutter 38mm 19mm 1/2""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20. D: 38 mm C: 19 mm B: 12.7 mm R: 12.7 mm OL: 65 ..."
Price: 58.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 9mm 19mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. DIMENSIONS: D1: 23/64 inches D1: 9 mm C: 3/4 inches..."
Price: 11.95 |
| "Trend Rota-Tip Bearing Guided Rebate Router Cutter 28.6mm 13.25mm 1/4""" |
| "Two blades. Ideal for rebating straight and shaped workpieces. Low profile bearing fixing screw. D: 28.6 mm C: 13.25 mm OL: 58.5 mm Shank Diameter: 1/4 inch Shank Length: 30 mm Shank Diameter: 1/4 Dia Metric: 28.6 Dia Imperial: 1 1/8 Cut..."
Price: 37.95 |
| "Trend RotaTip Straight Single Replaceable Blade Router Cutter 15mm 30mm 1/2""" |
| "Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank too..."
Price: 61.95 |
| "Trend Hand Hole Staff Bead Router Cutter 20mm 22mm 1/2""" |
| "With plunge cut these cutters can be used to cut and mould hand holes in stool seats. D: 20 mm C: 22 mm C2: 35 mm R: 18 mm OL: 74 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 20 Cut Length Metric: 22 Overall Length Metri..."
Price: 65.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 25.4mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.7 mm C: 1 inch C: 25.4 mm OL: 66..."
Price: 14.95 |
| "Trend Replacement Cutter Bearings Metric OD 14mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.9mm 25.4mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/16 inch D: 7.9 mm C: 1 inch C: 25.4 mm Ol: 68..."
Price: 11.95 |
| "Trend Snappy Hex Screwdriver Bit Hex 5mm 50mm Pack of 1" |
| "A 50mm hex screwdriver bit. High grade tool steel screwdriver bit, hardened for ultimate wear resistance. Metric sizes to suit KD furniture assembly. Overall length: 50 mm Size A/F: 5 mm for M6-M8 socket scw & M10 set scw & zipbolt Shank Diamete..."
Price: 4.49 |
| "Trend Aqua 63 Weatherseal Strip Brown 10m" |
| "Weather strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone..."
Price: 22.95 |
| "Trend Snappy Pozi Screwdriver Bits PZ1 50mm Pack of 3" |
| "High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Overall length: 50 mm Size: Pozi No.1 Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 50 ..."
Price: 7.49 |
| "Trend CRAFTPRO Bearing Guided Combination Ogee Router Cutter 41mm 17mm 1/2""" |
| "The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by..."
Price: 51.95 |
| "Trend CRAFTPRO Ogee Mould Bearing Guided Router Cutter 17.5mm 9.5mm 8mm" |
| "Supplied with extra 1/2 inch bearing for removing the lower quirk. D: 35 mm C: 11/16 inch C: 17.5 mm B: 9.5 mm B2: 12.7 mm R: 6.3 mm R2: 4.8 mm OL: 66.5 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Cut Length Metric: 17.5 Cut Length I..."
Price: 37.95 |
| "Trend Snappy Hex Shank HSS Drill Bit 5mm" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. D: 5 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 5..."
Price: 5.49 |
| "Trend Off Set Tongue and Groover Router Cutter 47.5mm 30mm 1/2""" |
| "A heavy duty reversible finger jointer, to increase the gluing area for edge to edge joints. D: 47.5 mm D2: 37 mm C: 30 mm OL: 66 mm Shank Diameter: 1/2 inch Timber thickness min.: 14 mm Timber thickness max.: 25 mm Shank Diameter: 1/2 ..."
Price: 66.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 5mm 40mm 8mm" |
| "Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute helical for drilling and slotting, cutting aluminium anodi..."
Price: 42.95 |
| "Trend CRAFTPRO Ogee Panel Mould Bearing Guided Router Cutter 85.7mm 15.9mm 1/2""" |
| "Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass...."
Price: 63.95 |
| "Trend Corner Bead Bearing Guided Router Cutter 38.1mm 34.7mm 1/2""" |
| "Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. TCT featuring Dnamic carbide with extended life for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes gi..."
Price: 71.95 |
| "Trend Radius Bearing Guided Router Cutter 12.7mm 9.5mm 1/4""" |
| "Template thickness should be 5mm thicker than cut length of cutter. D: 1/2 inch D: 12.7 mm C: 9.5 mm B: 12.7 mm R: 1/4 inch R: 6.35 mm OL: 50mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imperial: 1/2 Cut Length M..."
Price: 30.95 |
| "Trend Inlay Set Bearing Guided Router Cutter 22.2mm 6.3mm 12mm" |
| "Designed for routing Corian, which is used in many bathrooms and kitchens. D: 22.2 mm N: 19.0 mm C: 6.35 mm B: 12.7 mm B2: 16.0 mm B3: 19.0 mm OL: 78 mm Shank Diameter: 12 mm Shank Diameter: 12 mm Dia Metric: 22.2 Dia Imperial: 7/8 C..."
Price: 44.95 |
