| "Trend Bearing Guided Glue Gap Bevel Trimm Router Cutter 15mm 12mm 1/4""" |
| "Cut a wider edge line, at an angle of 82 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Has a gap between the tips and bearing, to reduce adhesive build-up. D: 15 mm C: 12 mm A: ..."
Price: 22.95 |
| "Trend Chamfer Bearing Guided Router Cutter 31.8mm 12mm 1/4""" |
| "Ideal for newel posts and caps for stairs. Supplied with one bearing. D: 31.8 mm C: 12 mm C2: 16 mm B: 9.5 mm A: 45 degrees OL: 51 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 31.8 Dia Imperial: 1 1/4 Cut Length Metric: ..."
Price: 54.95 |
| "Trend Eccentric Single Flute Router Cutter 1mm 3mm 8mm" |
| "Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pa..."
Price: 17.95 |
| "Trend TCT Through Drill 201 Series 8mm 25mm 10mm" |
| "Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. ..."
Price: 23.95 |
| "Trend Bearing Guided Double Rounding Over Set 16mm 9mm 1/2""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. Two rounded corners can be cut simultaneously. D: 22 mm C: 9 mm B: 16 mm R: 3 mm OL: 76 mm Shank Diameter: 1/2 inc..."
Price: 121.95 |
| "Trend Bearing Guided Ogee Router Cutter 35mm 17.5mm 1/4""" |
| "Supplied with two bearings. The larger bearing removes the bottom quirk. D: 35 mm C: 17.5 mm B: 9.5 mm B2: 12.7 mm R: 6.3 mm R2: 4.8 mm OL: 56 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 35 Dia Imperial: 1 3/8 Cut Leng..."
Price: 43.95 |
| "Trend CRAFTPRO Single Flute Router Cutter 6.3mm 12.7mm 1/4""" |
| "Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. D: 1/4 inch D: 6.3 mm C: 1/2..."
Price: 9.95 |
| "Trend Router Collet Reduction Sleeve 9.5mm 6.35mm" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work. D: 3/8 inch D: 9.5 m..."
Price: 10.95 |
| "Trend CRAFTPRO Matchlining Router Cutter Set 47mm 11mm 1/2""" |
| "A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. Set Ref. C255 can be converted to Ref. 256, and vice-versa, by purchasing the respective groover. D: 47 mm C: 11 mm C..."
Price: 81.95 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 4mm 12mm 8mm" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 18.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 50mm 2mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 50 mm Bore: M12 Kerf: 2 mm No. of Teeth: 4 Dia Metric: 50 Sawbore: M12 Saw Kerf Metric: 2 Saw Teeth: 4..."
Price: 59.95 |
| "Trend HSSE Spiral Upcut Non Ferrous Metal Router Cutter 5mm 40mm 8mm" |
| "Two flute helical up-cut cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mate..."
Price: 37.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 40mm 2.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 40 mm Kerf: 2.5 mm No. of Teeth: 2 Dia Metric: 40 Sawb..."
Price: 22.95 |
| "Trend STC Spiral Upcut Router Cutter 12.7mm 38mm 1/2""" |
| "Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plu..."
Price: 104.95 |
| "Trend Concave Sunk Bead Bearing Guided Router Cutter 22.2mm 19.1mm 1/2""" |
| "The bearing guided cutters are quick to set up and can be used for curved screens, doors etc. No side fence required. D: 22.2 mm C: 19.1 mm B: 12.7 mm R: 12 mm OL: 78 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 22.2 Dia Imp..."
Price: 47.95 |
| "Trend PCD Disposable MDF Router Cutter 15.9mm 25.4mm 1/2""" |
| "Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC routers..."
Price: 205.95 |
| "Trend CRAFTPRO Round Over and Ovolo Router Cutter 38mm 19.1mm 1/4""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by ..."
Price: 40.95 |
| "Trend Double Bearing Guided Trimmer Routing Cutter 19.1mm 25.4mm 12mm" |
| "Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more easily, by turning component other way up. D: 3/4 ..."
Price: 50.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 15.9mm 19.1mm 8mm" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 22.95 |
| "Trend Trimmer Router Cutter 20mm 13mm 1/4""" |
| "For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 24000 RPM. D: 20 mm C: 13 mm A: 90 degrees OL: 45 mm Shank Diameter: 1/4 inch Shank Diamete..."
Price: 32.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 31.8mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 1/4 inch D: 31.8 mm C: 25 mm OL: 2 1/2 inch O..."
Price: 40.95 |
| "Trend Undermount Bowl Bevel Router Cutter 24mm 25mm 1/2""" |
| "Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. D: 24 mm C: 25 mm A: 75 degrees OL: 65 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 24..."
Price: 51.95 |
| "Trend Rota-Tip Bearing Guided Ogee Router Cutter 26mm 15.7mm 1/4""" |
| "Two blades. Replaceable tips allow dimensions to be constant. Low profile bearing fixing screw. D: 26 mm C: 15.7 mm OL: 53 mm Shank Diameter: 1/4 inch Shank Length: 27 mm Shank Diameter: 1/4 Dia Metric: 26 Cut Length Metric: 15.7 Overall..."
Price: 38.95 |
| "Trend TCT Grooving Cutter 125mm 5mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 104.95 |
| "Trend CRAFTPRO Bearing Guided Classic Broken Ogee Router Cutter 35mm 14mm 1/2""" |
| "Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. D: 35 mm C: 14 mm B: 35 mm R: 5.2 mm OL: 65 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35 Dia Imper..."
Price: 42.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 40mm 25mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 40 mm Bore: M12 Kerf: 25 mm No. of Teeth: 2 Dia Metric: 40 Sawbore: M12 Saw Kerf Metric: 25 Saw Teeth: 2..."
Price: 52.95 |
| "Trend Bearing Guided Decorative Bead Router Cutter 35mm 38mm 1/2""" |
| "For architraves, framing as well as edge moulding. D: 35 mm D2: 22 mm C: 38 mm B: 16 mm R: 7 mm R2: 5 mm OL: 87 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35 Dia Imperial: 1 3/8 Dia2 Metric: 22 Cut Length Metric: 38 ..."
Price: 72.95 |
| "Trend Bearing Guided Trimmer Router Cutter 12.7mm 25mm 8mm" |
| "For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a ..."
Price: 23.95 |
| "Trend Bookcase Strip Rebate Router Cutter 14mm 8mm 1/2""" |
| "Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. D: 14 mm D2: 20 mm C: 8 mm C2: 6 mm OL: 52 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: ..."
Price: 49.95 |
| "Trend CRAFTPRO Bearing Guided Easyset Ogee Router Cutter 41mm 17mm 8mm" |
| "The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by..."
Price: 63.95 |
| "Trend CRAFTPRO Bearing Guided Glazing Bar Ovolo Joint Router Cutter 28mm 19mm 1/4""" |
| "The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. D: 28 mm C: 19 mm B: 12.7 mm R: 10 mm OL: 70.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 28 Cut Length Metric..."
Price: 48.95 |
