| "Trend Bearing Guided Architrave Router Cutter 40mm 29.5mm 8mm" |
| "Self guided for modern architrave & skirting. D: 40 mm C: 29.5 mm B: 9.5 mm R: 9 mm A: 73 degrees OL: 74.3 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 40 Cut Length Metric: 29.5 Overall Length Metric: 74.3 Bearing Dia Met..."
Price: 53.95 |
| "Trend Bearing Guided Undermount Bowl Bevel Router Cutter 32mm 25mm 1/2""" |
| "Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Designed to trim surface to an undermount bowl. D: 32 mm C: 25 mm B: 21.8 mm A: 78 degrees OL: 80 mm S..."
Price: 72.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 230mm 40T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spind..."
Price: 19.95 |
| "Trend Bearing Guided Classic Corner Bead Router Cutter 50.8mm 25mm 1/2""" |
| "Edge moulding cutter for plinths. D: 50.8 mm C: 25 mm B: 12.7 mm R: 6.5 mm R2: 8 mm OL: 75 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 50.8 Dia Imperial: 2 Cut Length Metric: 25 Overall Length Metric: 75 Bearing Dia M..."
Price: 70.95 |
| "Trend Snappy Hex Shank HSS Drill Bit 7/32""" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. D: 7/32 inch D: 5.5 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 5.55 Dia Imperial: 7/32..."
Price: 5.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 76.5mm 38mm 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 113.95 |
| "Trend Pin Guided Round Over Router Cutter 34.4mm 19mm 1/4""" |
| "Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. D: 34.4 mm C: 19 mm P: 9 mm R: 1/2 inch R: 12.7 mm OL: 56.1 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 34.4 Cut Length Metric..."
Price: 50.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 4mm 11.1MM 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/32 inch D: 4 mm C: 7/16 inch C: 11.1 mm Ol: 6..."
Price: 13.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 25.4mm 13mm 1/4""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 45.95 |
| "Trend Snappy Stepped Drill for RTA Bolts 7mm" |
| "Step drill with hardened cutting edges for furniture construction bolts. Supplied with HSS slow spiral drill. Used to stepped drill hole for Confirmat style screws for carcass assembly where a right angled joint is required. Shank Diameter: 1/4 i..."
Price: 16.95 |
| "Trend CRAFTPRO Aquamac 21 Recess Router Cutter 46.3mm 2.7mm 1/2""" |
| "Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. This cutter is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations. ..."
Price: 53.95 |
| "Trend Hinge Boring Router Machine Bit 25mm 1/2""" |
| "These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. D: 25 ..."
Price: 52.95 |
| "Trend Classic Panel Bearing Guided Router Cutter 22mm 10mm 1/4""" |
| "Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. D: 22 mm C: 10 mm B: 22 mm R: 3.5 mm OL: 51 mm Shank Diameter: 1..."
Price: 51.95 |
| "Trend CRAFTPRO Wood Cutting Mitre Saw Blade 215mm 60T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ens..."
Price: 21.95 |
| "Trend Bearing Guided Bevel Trimmer Router Cutter 27mm 9mm 1/4""" |
| "Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. D: 27 mm C: 9 mm A: 45 degrees OL: 51.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1..."
Price: 41.95 |
| "Trend Chamfer Bearing Guided Router Cutter 35.1mm 12mm 1/2""" |
| "Ideal for newel posts and caps for stairs. Supplied with one bearing. D: 35.1 mm C: 12 mm C2: 16 mm B: 12.7 mm A: 45 degrees OL: 67 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35.1 Cut Length Metric: 12 Overall Length M..."
Price: 65.95 |
| "Trend Eccentric Single Flute Router Cutter 3mm 11mm 1/4""" |
| "Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage. Single flute cutters..."
Price: 25.95 |
| "Trend Eccentric Single Flute Router Cutter 9.5mm 25mm 1/2""" |
| "Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. ..."
Price: 26.95 |
| "Trend Solid Tungsten Carbide Mini Burrs 6mm 6mm 3mm" |
| "Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. D: 6 mm C: 6 mm ..."
Price: 26.95 |
| "Trend Bookcase Strip Rebate Router Cutter 14mm 8mm 1/4""" |
| "Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. D: 14 mm D2: 20 mm C: 8 mm C2: 6 mm OL: 42.6 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric..."
Price: 49.95 |
| "Trend Snappy Hex Shank Masonry Drill Bit 5mm" |
| "Tungsten Carbide Tipped masonry drill to suit wall plugs. D: 5 mm OL: 105 mm Flute length: 44 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 5 Overall Length Metric: 105..."
Price: 4.49 |
| "Trend Ovolo Rounding Over Router Cutter 31mm 16mm 1/2""" |
| "Some Ovolo cutters can be used with radius cutters, to make rule joints. D: 31 mm C: 16 mm R: 10 mm OL: 54.1 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 31 Cut Length Metric: 16 Overall Length Metric: 54.1 Radius 1 Metr..."
Price: 57.95 |
| "Trend TCT Dowel Drill 201 Series 12mm 35mm 10mm" |
| "Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting s..."
Price: 26.95 |
| "Trend TCT Through Drill 201 Series Left Hand Rotation 6mm 40mm 10mm" |
| "Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. ..."
Price: 25.95 |
| "Trend TRADE RANGE Bearing Guided Rebater Router Cutter 35mm 1/4""" |
| "Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched ..."
Price: 39.95 |
| "Trend Stair Housing Dovetail Right Hand Rotation Router Cutter 19mm 25.5mm 1/2""" |
| "Purpose made for stair housing jigs. Ensures tight fit of tread in string. D1: 3/4 inch D1: 19 mm C: 25.5 mm OL: 65 mm A: 95 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19 Dia Imperial: 3/4 Cut Length Metric: 25...."
Price: 51.95 |
| "Bosch M480 125mm Net Abrasive Sanding Disc 125mm 120g Pack of 5" |
| "The M480 Net Best for Wood and Paint ensures virtually dust-free sanding and keying on wood as well as painted surfaces. Its open net structure enables full-surface extraction of the sanding dust while working. Furthermore, its design encourages mini..."
Price: 5.49 |
| "Draper Torx Screwdriver Bits T27 75mm Pack of 2" |
| "Chrome vanadium steel hardened, tempered with shot blast finish. Supplied in 1 or 2's. Draper TX-STAR® products are compatible with †Torx fixing systems †Torx is the registered trademark of Acument Intellectual Properties LLC. ..."
Price: 1.95 |
| "Festool Platin 2 Super Finishing 150mm Polishing Disc 150mm 2000g Pack of 15" |
| "Festool Platin 2 150mm Super Finishing Polishing Disc's are suitable for use with RO 150, ES 150, ETS 150, ETS EC 150, LEX 150, WTS 150, HSK-D 150 Specifications • Diameter: 150mm • Grit: 2000g • Pack Qty: 15Con..."
Price: 52.95 |
| "Festool Platin 2 Super Finishing 150mm Polishing Disc 150mm 1000g Pack of 15" |
| "Festool Platin 2 150mm Super Finishing Polishing Disc's are suitable for use with RO 150, ES 150, ETS 150, ETS EC 150, LEX 150, WTS 150, HSK-D 150 Specifications • Diameter: 150mm • Grit: 1000g • Pack Qty: 15Con..."
Price: 51.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 15.9mm 19.1mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/8 inch D: 15.9 mm C: 3/4 inch C: 19.1 mm OL: ..."
Price: 16.95 |
